MODIFICATION
99 -- Fabrication & Installation of Great Seal - Amendment 1
- Notice Date
- 5/12/2010
- Notice Type
- Modification/Amendment
- NAICS
- 339950
— Sign Manufacturing
- Contracting Office
- General Services Administration, Public Buildings Service (PBS), Project Management Acquisition Branch (2PCB), 26 Federal Plaza, Room 1639, New York, New York, 10278
- ZIP Code
- 10278
- Solicitation Number
- GS-02P-10-DT-P-0018
- Archive Date
- 6/5/2010
- Point of Contact
- Dorothy Daloia, Phone: 2122644234, Winnie Eng, Phone: 2122642575
- E-Mail Address
-
dorothy.daloia@gsa.gov, winnie.eng@gsa.gov
(dorothy.daloia@gsa.gov, winnie.eng@gsa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Attachment 6 Attachment 5 Attachment 4 The attached sketch (labeled "Great Seal Mounting Depression", dated 5/12/10) provides information on the area where the Department of State seal is to be mounted. Dimensions on the sketch are in millimeters. The center of the area where the Seal will be mounted is roughly 26 feet above finished floor. There is an area of concrete that is recessed to a depth of roughly 1 inch, and roughly 5 feet in diameter, over which the new Seal is to be installed. Within the depressed area, there are four tie holes that extend through the roughly 19 inch thick concrete wall. There is a plastic plug in each of the tie holes now that could be easily removed. The diameter of the tie holes is roughly 2" for the first 2.25 inches of wall, then narrows to a ¾" diameter for the remainder of the wall thickness. These tie holes can be utilized as one potential method of connecting the new Seal to the concrete.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/GSA/PBS/2PCB/GS-02P-10-DT-P-0018/listing.html)
- Record
- SN02147195-W 20100514/100512234715-d7f6ad9cf4d47f9c3520ac68398e9fac (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |