SOURCES SOUGHT
56 -- EXPANSION JOINT FILLER - Expansion Joint Filler
- Notice Date
- 5/27/2010
- Notice Type
- Sources Sought
- NAICS
- 238110
— Poured Concrete Foundation and Structure Contractors
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), Southwest Supply Operations Center (QSDL), 819 Taylor St Room 6A00, Fort Worth, Texas, 76102, United States
- ZIP Code
- 76102
- Solicitation Number
- W91EB801320126
- Point of Contact
- Donald E. Spears, Phone: 817-574-4253
- E-Mail Address
-
donald.spears@gsa.gov
(donald.spears@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- EXPANSION JOINT FILLER MARKET SURVEY - NSN 5610-00-274-4148 FILLER, EXPANSION JOINT, BITUMINOUS Company Name : _______________ DUNS Number: ___________, CAGE CODE: ____________ FOB Origin ____________ or Destination ______________ Point of Contact (POC): POC Email: Telephone Number: Fax Number: Date: Do you offer quantity discounts? _________ If so, please list __________________________________________________________ What is the earliest delivery time you can offer? ________________________________ Please respond by COB Wednesday, June 2, 2010 This Market Survey is to determine availability and potential pricing of Non-Stock Items. This is NOT an RFQ. Please do not ship. Item must meet the specifications as indicated on the attached Item Purchase Descriptions (IPD). We will be seeking average United States pricing for all domestic shipping points. Purchase Order quantities will vary. The attached quantities are estimates only. Preferred Delivery: 30 After Receipt of Order (ARO) Please complete, as applicable, the charts provided for the attached IPD: If you have any questions, you may contact Donald Spears at: donald.spears@gsa.gov Item 1. NSN 5610-00-274-4148 FILLER, EXPANSION JOINT, BITUMINOUS Item Description : NSN: 5610-00-274-4148 FILLER, EXPANSION JOINT, BITUMINOUS (PREFORMED): Shall be in accordance with ASTM D1751 with the following characteristics: Length - 60.000 inches, ± 1/4 inch Width - 6.0000 inches, ± 1/8 inch Thickness - 0.375 inches, +1/16 inch, -0 Unit of issue - BD (bundle having ten (10) each) PRODUCT CONFORMANCE : The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. PREPARATION FOR DELIVERY : The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging : The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, "Guidelines for Regulating Wood Packaging Material in International Trade". Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17. MARKING : Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129. DATA SUBMISSION : The material safety data sheet (MSDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. For shipments to GSA distribution centers or Customer Supply Centers, the contractor shall provide one copy of the MSDS inside or affixed to the outside of each transport package (as defined in FED-STD-123), if affixed outside, the MSDS must be placed in a weather-resistant envelope.12012009 (End of provision) Please only give pricing for quantities of 1 unit EA FILLER, EXPANSION JOINT, BITUMINOUS Manufacturer Brand Name & Part Number offered MAS Special Item Number (SIN) Estimated Quantity 10 Estimated Unit Price $ Country of Origin
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/b0a8dd687500d7c486d48376a4f96064)
- Record
- SN02162806-W 20100529/100527235648-b0a8dd687500d7c486d48376a4f96064 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |