MODIFICATION
25 -- PARTS KIT, HYDRAULIC
- Notice Date
- 6/21/2010
- Notice Type
- Modification/Amendment
- NAICS
- 336399
— All Other Motor Vehicle Parts Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, Defense Supply Center Columbus, P O Box 3990, Columbus, Ohio, 43218-3990
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L110R0019
- Archive Date
- 8/24/2010
- Point of Contact
- Linda Combs, Phone: 614-692-7408
- E-Mail Address
-
linda.combs@dla.mil
(linda.combs@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Description: NSN 2530-01-568-8843 – Parts Kit, Hydraulic being bought in accordance with Army (19207) drawing 57K4919 and all related data. The total quantity required is 516 each with 156 each to be shipped to (W62G2T) Stockton, CA 95296-0130 and 360 each to be shipped to (W25G1U) New Cumberland, PA 17070-5000. This solicitation is an RFP and will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of 07/08/10; hard copies of this solicitation are not available. Technical drawings/bid sets are available on or about the same issue date on the Internet at http://www.dibbs.bsm.dla.mil/ then click the cFolders under the Technical Data tab. Requests should include the RFP number, opening/closing date, NSN, Purchase Request Number, buyer’s name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. This solicitation is 100% set-aside for small business concerns. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance. The required delivery is 150 days. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists, Military Handbooks, and other standardization documents from the DoD single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST-Quick Search and, in most cases download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shipping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DODSSP Special Assistance Desk at (215 697-6396/6257 (DSN: 442-6396/6257). Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice. Users not having access to the Internet may contact the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP. ITEM DESCRIPTION FOR PR: 0026859284 PARTS KIT,HYDRAULIC First Article Testing is imposed on this material in reference to QAP # 12342898. SPC is incorporated for this material. "ANY ITEM PREVIOUSLY TESTED BY A VENDOR IN ACCORDANCE WITH *** QUALIFICATION*** REQUIREMENTS (FOR EXAMPLE: FAT, HIGH SHOCK AND/OR VIBRATION TEST), STATED ON DWG, SPECIFICATION, OR STANDARD MAY NOT REQUIRE FURTHER TESTING BY THE SAME VENDOR EXCEPT FOR A LATER CHANGE IN DESIGN, MANUFACTURING PROCEDURES, OR TESTING REQUIREMENTS. A CERTIFICATION OF CONFORMANCE WITH PREVIOUS TEST RESULTS ATTESTING APPLICABILITY SHALL BE SUBMITTED FOR ITEMS PREVIOUSLY TESTED." "FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE." CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. "CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION -CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT." DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. I/A/W DRAWING NR 19207 12338124 REFNO AMEND NR B DTD 01/31/00 TYPE NUMBER I/A/W QAP 19207 12339353 REFNO AMEND NR C DTD 11/24/92 TYPE NUMBER I/A/W DRAWING NR 19207 12339353 REFNO AMEND NR F DTD 01/22/93 TYPE NUMBER I/A/W DRAWING NR 19207 12342898 REFNO AMEND NR F DTD 04/01/08 TYPE NUMBER I/A/W QAP 19207 12342898 REFNO AMEND NR C DTD 06/06/07 TYPE NUMBER I/A/W QAP 19207 12342899 REFNO AMEND NR D DTD 10/06/09 TYPE NUMBER I/A/W DRAWING NR 19207 12342899 REFNO AMEND NR E DTD 01/24/09 TYPE NUMBER I/A/W DRAWING NR 19207 12342900 REFNO AMEND NR B DTD 03/17/00 TYPE NUMBER I/A/W DRAWING NR 19207 12342901 REFNO AMEND NR A DTD 04/06/00 TYPE NUMBER I/A/W DRAWING NR 19207 12518750 REFNO AMEND NR DTD 10/07/08 TYPE NUMBER I/A/W DRAWING NR 19207 57K4919 BASIC AMEND NR DTD 10/07/08 TYPE NUMBER
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L110R0019/listing.html)
- Place of Performance
- Address: Defense Supply Center, Columbus, 3990 E. Broad Street, Columbus, Ohio, 43218, United States
- Zip Code: 43218
- Zip Code: 43218
- Record
- SN02183138-W 20100623/100621234715-5c5957d7fea837c918a314cdbdef580a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |