SOLICITATION NOTICE
20 -- Vidir Wire Carousels
- Notice Date
- 7/15/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- N68836 FISC JACKSONVILLE, KINGS BAY DET 930 USS Hundley, Bldg 2012 Naval Submarine Base Kings Bay, GA
- ZIP Code
- 00000
- Solicitation Number
- N68836T000010
- Response Due
- 7/29/2010
- Archive Date
- 8/13/2010
- Point of Contact
- Miguel Rivera 912-573-8517
- Small Business Set-Aside
- Total Small Business
- Description
- The VIDIR WIRE CAROUSELS or equivalent with available options shall consist of the following: 1) Dimensions to be 8'9" wide x 6'5" deep x 15'1" high 2) 10 carriers with 3 bays per carrier (26" x 26" bays) 3) Capacity of 1,000 lbs per carrier4)Machine capacity of 10,000 lbs5)Maximum 24" diameter spools6)Adjustable bar positions for maximum storage capacity7)Includes wire loading dolly8)Corrugated sheet metal back enclosure9)Wire mesh front guarding10) Retrieval speed of 18 feet per minute11) Dual 1hp, 480 volt, 3 phase, 60hz electrical motors12) Forward/reverse push button controls13) Security keypad to prevent unauthorized use14) Main power disconnect switch15)Spinner with 12 rods16)Measuring & roll-up reel system17)Dispensing platform 3.2ON-SITE SETUP/TESTINGWithin 10 days after receipt of the WIRE CAROUSEL by the receiving activity, the contractor shall provide the services of a qualified manufacture's representative to prepare the machine for operation and testing. The requiring activity shall anchor the machine and hook up all utilities. All operator controls and features of the machine shall be tested by the manufacture's representative to ensure the system is operating properly and within the manufacture's specifications. 3.3NAMEPLATE A corrosion-resistant metal nameplate shall be securely attached to the outer surface of the WIRE CAROUSEL and must be visible from the front side of the machine. The nameplate shall be engraved of photo-etched (not hand etched or stamped) with the captions listed below and the corresponding information for each caption. If the equipment is a special model, the model designation shall include the model of the basic standard and a suffix identified in the manufacturer's permanent records. The captions listed may be shortened or abbreviated, provided the entry for each caption is clear as to its identity: NOMENCLATUREMANUFACTURER'S NAMEMANUFACTURER'S MODEL DESIGNATIONMANUFACTURER'S SERIAL NUMBERDATE OF MANUFACTURECONTRACT NUMBERVOLTAGE__________ PHASE __________ HERTZ __________ Quantity two (2) each
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N68836FJDPEN/N68836T000010/listing.html)
- Place of Performance
- Address: Naval Sub Base, kings Bay, GA
- Zip Code: 31547
- Zip Code: 31547
- Record
- SN02207749-W 20100717/100715235749-1b9a3005d2234c4964216dc91ff915b6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |