SOLICITATION NOTICE
66 -- Infrared Optimized Optical Telescope
- Notice Date
- 7/26/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640
- ZIP Code
- 20899-1640
- Solicitation Number
- SB1341-10-RQ-0567
- Archive Date
- 9/30/2010
- Point of Contact
- Joni L Laster, Phone: 301-975-8397, Todd D Hill, Phone: 301-975-8802
- E-Mail Address
-
joni.laster@nist.gov, todd.hill@nist.gov
(joni.laster@nist.gov, todd.hill@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-44. The associated North American Industrial Classification System (NAICS) code for this procurement is 333314 with a small business size standard of 500 employees. This acquisition is 100% set-aside for small business. In accordance with the non-manufacturer rule, the contractor shall be a small business under the applicable size standard and shall provide either its own product or that of another domestic small business manufacturing or processing concern. See FAR 19.102(f) for additional information. The National Institute of Standards and Technology (NIST) has a requirement for a Infrared Optimized Optical Telescope. All equipment must be new; used and/or remanufactured equipment will not be considered for award. All responsible quoters shall provide a quotation for the following line item: LINE ITEM 0001: Quantity one (1) each, Infrared Optimized Optical Telescope that shall meet or exceed the following required specifications. 1. Diameter: 20" min, 24" max 2. Focal ratio: f/6 or slower 3. Field of View: 0.4 degrees diameter with <10 micron images 4.Optical design: All reflecting optics, no refractive elements and no non-normal incidence (i.e. 45 degree) reflections, Cassegrain-form optical layout (Ritchie-Chretien, Dall-Kirkham, etc. are all acceptable). 5. Mirror coatings: protected aluminum or better 6. Tube: Low thermal expansion tube or truss design, carbon fiber or similar, optical bench backplate, mounting plates on side of tube to accommodate 24" wide, 5" tall mounting area for transmitters and receivers 7. Mount: Alt-Az fork mount, computer controllable, minimum 4 degrees per second slew speed, capacity for above telescope and 20 lbs. of additional equipment. 8. Additional equipment: motorized focuser and mirror covers Warranty The Contractor shall provide, at a minimum, a one year warranty for the equipment. The warranty shall include all parts, labor and travel. The Contractor shall state the warranty coverage for the equipment. Delivery shall be in accordance with the Contractor's commercial delivery schedule. Delivery terms shall be FOB Destination. FOB Destination means: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver all line items to NIST, Building 301, Gaithersburg, MD 20899. Award shall be made to the lowest priced, technically acceptable quoter. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability factor "Meeting or Exceeding the Requirement," and 2) Price. Price shall not be evaluated on quotes that are determined technically unacceptable in accordance with the Technical Capability Evaluation factor. Technical Capability: Evaluation of Technical Capability will be based on the information provided in the quotation. Documentation submitted in the quotation shall be evaluated to determine that the proposed equipment meets or exceeds the Governments minimum required specifications. The full text of a FAR provision or clause may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following clauses apply to this acquisition: 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs: 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28 Post-Award Small Business Program Re-Representation; 52.222-3, Convict Labor; 52.222-19 Child Labor - Cooperation With Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52-222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-1 Buy American Act - Supplies; 52.225-13 Restriction on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration. Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. All quoters shall submit the following: 1) An original and one (1) copy of a quotation which addresses all line items; 2) For the purpose of evaluating technical capability: Technical description and/or product literature which clearly details the manufacturer, make and model of the proposed product(s), addressed all required specifications, and clearly documents that the offered product(s) meet(s) or exceeds the specifications stated herein. 3) Description of commercial warranty; 4) A current copy of the Contractor's price list or catalog pages that contain pricing for the equipment/services defined within the Contractor's quotation; 5) This is an Open-Market Combined Synopsis/Solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein as follows: The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Please note that this procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. All quotes shall be received not later than 3:00 PM local time, on August 9, 2010 at the National Institute of Standards & Technology, Acquisition Management Division, 100 Bureau Drive, Building 301, Room B125, Mail Stop 1640, Gaithersburg, MD 20899-1640, Attn: Joni Laster. Any questions or concerns regarding this solicitation shall be forwarded in writing via e-mail to the Contract Specialist (Joni L. Laster) @ joni.laster@nist.gov. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 24-hour (excluding weekends and holidays) prior notice shall be made to the Contracts Office at 301-975-8397. E-mail quotes ARE acceptable. Fax quotes will NOT be accepted. Quotations shall not be deemed received by the Government until the quotation is entered into the e-mail address inbox set forth above.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-10-RQ-0567/listing.html)
- Place of Performance
- Address: 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN02217489-W 20100728/100726234835-0f22f90892a44260a6d26e76fafe1e6a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |