SOLICITATION NOTICE
66 -- Potentiostat/Galvanostat System
- Notice Date
- 7/19/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640
- ZIP Code
- 20899-1640
- Solicitation Number
- SB1341-10-RQ-0579
- Archive Date
- 8/17/2010
- Point of Contact
- Joshua D. Holliday, Phone: 3019758497, Todd D Hill, Phone: 301-975-8802
- E-Mail Address
-
joshua.holliday@nist.gov, todd.hill@nist.gov
(joshua.holliday@nist.gov, todd.hill@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. ***This solicitation is being issued using Simplified Acquisition Procedures.*** ***This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-44.*** *** The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 with a small business size standard of 500 employees. This requirement is a 100% Small Business Set-Aside.*** ***All interested Contractors may provide a quote for the following: Line Item 0001: Quantity One (1) Potentiostat/Galvanostat Turn-Key System, which shall meet or exceed the following minimum specifications: 1. The system shall be capable of performing as a Potentiostat or as a Galvanostat. 2. The system shall be capable of synchronous programmable control of each of two (or more) working electrodes that share a common reference and counter electrodes during the course of experimentation. 3. The system shall have a current compliance of at least 10 milliamps. 4. The system shall have voltage compliances of 8 Volts between the counter and working electrode and 2 Volts between reference to working electrode. 5. The system shall have a slew rate of 1 Volts/microsecond (1 Kilo-ohms load) when operating as a Potentiostat. 6. The system shall have a current resolution not inferior to 2% of the current applied within the range of 100 nanoamps to 10 milliamps. May be obtained by dividing the operating range into multiple sub ranges. 7. The system shall have a 1011 Ohms impedance (in parallel with 5 picofarads) for the reference electrode input. If the published specification for the reference electrode impedance is given at a higher resistance, then the actual conditions shall be reported. 8. The system shall be protected against any overload condition. 9. The system shall be capable of interfacing with a computer in analog or digital form to permit remote control and sensing of the electrode's conditions during the course of an experiment (i.e., status, enabled or disabled, and the current and potential). 10. The computer interface shall be enabled by means of connectors provided somewhere in the instrument's chassis. 11. The instrument shall accommodate arbitrary shape waveform to be determined prior to the start of a given experiment and to be stored within the instruments memory. The instrument shall also store a programmable experiment duration and interval between point applications. 12. Digital output signals shall be acquired with at least 16 bits of resolution at a rate faster than 20 microseconds, inclusive, between samples for each signal (i.e., ≥ 50 kHz). The size of the buffer shall be sufficient to sustain the data acquisition operation indefinitely (i.e., of sufficient size to maintain real-time downloading of the data collected through a provided communication port). 13. Communication between the computer and the system shall be enabled using an algorithm accessible through the LabView programming language as well as any additional software provided by the Contractor. Examples for the programming interface must be provided. Delivery terms shall be FOB Destination. FOB Destination means: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver line item 0001 to NIST, Building 301, Shipping and Receiving, Gaithersburg, MD 20899-1640. Evaluation Criteria: Award shall be made to the quoter whose quote offers the best value to the Government, technical capability, past performance, and price will be considered. The Government will evaluate information based on the following evaluation criteria: 1) Technical Capability factor "Meeting or Exceeding the Minimum Specifications," 2) Past Performance and 3) Price. Technical capability, and past performance, when combined, shall be more important than price. If Technical Capability, and Past Performance are equivalent, price shall be the determining factor. Technical Capability: Evaluation of Technical Capability will be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. NIST will give preference to offerors who demonstrate that their proposed equipment exceeds NIST's requirements. NIST will give stronger preference to offerors whose quoted equipment exceeds minimum requirements stated below. Stronger Considerations: Under the Technical Capability factor, stronger consideration will be given for a system that provides: 1. Possibilities for IR compensation on one or all electrodes such as: a. Fixed value b. Current interrupt c. Positive feedback compensation 2. Built-in Frequency Response Analyzer to enable Electrochemical Impedance Spectroscopy. 3. Front panel display of instrument status, such as: a. Cell enabled/disabled b. Current or voltage overload condition c. Applied current and potential 4. Automatic optimization of range for current and potential. 5. Noise filters. 6. Size of the buffer for the stored digital signals. 7. Current boosters for each working electrode. 8. Built-in function generator. Past Performance: The Government will evaluate the Offeror's past performance information and, if appropriate, its proposed subcontractors' past performance to determine its relevance to the current requirement and the extent to which it demonstrates that the offeror has successfully completed relevant contracts in the past five years. In assessing the offeror's past performance information, NIST will evaluate the quality, timeliness, and ability to control cost and schedule of the past work. Evaluation of this factor will be based on information contained in the technical portion of the quotation and information provided by references. The Government will evaluate past performance information by contacting appropriate references, including NIST references, if applicable. The Government may also consider other available information in evaluating the Offeror's past performance. The Government will assign a neutral rating if the offeror has no relevant past performance information. Price: Quoted price will be evaluated for reasonableness. *** The full text of a FAR provision or clause may be accessed electronically at http://acquisition.gov/comp/far/index.html. *** *** The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. *** *** Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. ******The following clauses apply to this acquisition: 1. 52.212-4 Contract Terms and Conditions-Commercial Items; 2. 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs: a. 52.219-6 Notice of Total Small Business Set-Aside b. 52.219-28 Post Award Small Business Program Rerepresentation c. 52.222-3 Convict Labor d. 52.222-19 Child Labor - Cooperation With Authorities And Remedies e. 52.222-21 Prohibition of Segregated Facilities f. 52.222-26 Equal Opportunity g. 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans h. 52.222-36 Affirmative Action for Workers with Disabilities i. 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans j. 52.225-1 Buy American Act k. 52.225-13 Restriction on Certain Foreign Purchases, and l. 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration. Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. *** WARRANTY: The Contractor shall provide at a minimum, a one year warranty (parts and labor) on the product. Please provide a description of the warranty provided for this equipment. Please include the following details: 1. Length of warranty 2. What is included? (Parts, Labor) 3. Is the warranty on-site or return to vendor? a. If on-site is travel included? b. If return to vendor is shipping to and from NIST included? ***All quoters shall submit the following: 1) An original and one (1) copy of a quotation which addresses Line Item 0001; 2) An original and one (1) copy of the technical description and/or product literature; 3) Description of commercial warranty; 4) An original and one (1) copy of the most recent published price list(s); 5) A list of three (3) references which includes the contact's name, phone number, and e-mail; 6) Country of Origin information for each line item.*** ***All quotes shall be sent to the National Institute of Standards and Technology, Acquisition Management Division, Attn: Joshua Holliday, Building 301, Room B175, 100 Bureau Drive, Stop 1640, Gaithersburg, MD 20899-1640. *** This is an Open-Market Combined Synopsis/Solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein as follows: The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Please note that this procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. ***Submission shall be received not later than 3:00 p.m. local time on July 30, 2010 at the National Institute of Standards & Technology, Acquisition Management Division, 100 Bureau Drive, Building 301, Room B175, Mail Stop 1640, Gaithersburg, MD 20899-1640, Attention: Joshua Holliday. Because of heightened security, FedEx, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be made to the Contracts Office at 301-975-4959. For non-U.S. citizens, the following additional information will be required: title, employer/sponsor, and address. Please ensure that the individual making the delivery brings photo identification, or they will be denied access to the facility. Offerors shall submit their quotations so that NIST receives the complete quotation not later than 3:00 PM Eastern Time on July 30, 2010. FAX quotations shall not be accepted. E-mail quotations shall be accepted at joshua.holliday@nist.gov. E-mail quotations shall not be deemed received until the quotation is entered in the e-mail inbox of Joshua Holliday.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-10-RQ-0579/listing.html)
- Place of Performance
- Address: 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN02210418-W 20100721/100719234818-4cabd9f46bbc1c14271fad7c73b3f0e2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |