MODIFICATION
13 -- This Rock Island Contracting Command(RICC)Pre-Solicitation Sysnopsis requirement is for the following items: 60MM M702,81MM M299,and 81MM M752A1 Ignition Cartridges.
- Notice Date
- 8/6/2010
- Notice Type
- Modification/Amendment
- NAICS
- 332993
— Ammunition (except Small Arms) Manufacturing
- Contracting Office
- Rock Island Contracting Center (RI-CC), ATTN: AMSAS-AC, Rock Island, IL 61299-6500
- ZIP Code
- 61299-6500
- Solicitation Number
- W52P1J09R0149
- Response Due
- 8/23/2010
- Archive Date
- 10/22/2010
- Point of Contact
- GENE P. DAVIS, 309-782-3242
- E-Mail Address
-
Rock Island Contracting Center (RI-CC)
(gene.davis3@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Rock Island Contracting Command (RICC) has a requirement for the following items: 60MM M702, NSN 1310-01-342-6874, P/N 12944411; 81MM M299, NSN 1315-01-050-8883, P/N 9293422 and 81MM M752A1, NSN 1315-01-290-4748, P/N 9294752. The associated North American Industry Classification System Codes (NAICS) is 332993. This requirement is restricted to the National Technology and Industrial Base (United States and Canada) under 10 USC 2304(C) (3). The USG will evaluate offeror(s) proposals using a Four Phased Lowest Priced Technically Acceptable (LPTA) approach in accordance with FAR 15.101-2. Offeror(s) will be required to submit separate proposals for each item they wish to be considered for. The Four Phases will consist of the following: Phase I- Hazard Classification Phase II- Manufacturing Readiness Level Assessment (MRL) Phase III- USG Site Visit Phase IV- Price Evaluation In Phases I-III offeror(s) will be given a rating of either acceptable or unacceptable based on evaluation criteria outlined in the forthcoming solicitation. If an offeror is determined acceptable in Phase I they will continue to Phase II for further evaluation. Offeror(s) determined acceptable in Phase II will continue to Phase III for evaluation. Those offeror(s) determined acceptable in Phase III will have their prices evaluated in Phase IV. Any offeror determined unacceptable in any Phase (I-III) will not continue to have their proposal evaluated in the next Phase. It is the intent of the USG to make a minimum of two awards per item. Offeror(s) receiving an award will be awarded a Firm-Fixed Price 5-period Indefinite Delivery Indefinite Quantity (IDIQ) contract. Future requirements will be competed amongst the offeror(s) receiving an award and may be based on price, delivery, capacity and/or past performance. The guaranteed minimum for each IDIQ contract is 20 each inert cutaway models for the specific Ignition Cartridge that is awarded. The 60MM and 81MM Ignition Cartridges have Technical Data Packages (TDP) with a Distribution Statement D. All interested parties will be required to submit a certified DD Form 2345 in accordance with DoD Directive 5230.25 and a Non-Disclosure Agreement to obtain a copy of the TDP. Instructions for completing the DD Form 2345 can be found at http://www.dlis.dla.mil/jcp under documents. Restricted technical data will not be forwarded to a contractor who has not been certified. The estimated total quantities for the entire contract period are: 3,387,844 ea for the 60MM M702; 3,250,628 ea for the 81MM M299; and 604,800 ea for the 81MM M752A1. First Article Test (FAT) will be required. Delivery will be FOB Origin to locations determined at time of delivery order placement. This solicitation and any amendments will be issued electronically in accordance with FAR 4.5 and 5.102, therefore, hardcopies will not be provided. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the internet: HTTP://WWW.FEDBIZOPPS.GOV or HTTP://WWW.AFSC.ARMY.MIL/AC/AAIS/IOC/SOLINFO/INDEX.HTM. NOTE: As this solicitation and any amendments thereto will be issued electronically, vendors are advised to periodically access the above addresses in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the closing date and time set for closing of the RFP may render your proposal nonresponsive and result in the rejection of it. All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the Central Contractors Register (CCR) http://www.ccr.gov/. If you are not registered in CCR, you cannot be awarded a DoD contract. Questions may be addressed to the Contract Specialist, Gene P. Davis at gene.davis3@us.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/d4619eab5a84d2b25efc23746981d4cc)
- Place of Performance
- Address: Rock Island Contracting Center (RI-CC) ATTN: AMSAS-AC, Rock Island IL
- Zip Code: 61299-6500
- Zip Code: 61299-6500
- Record
- SN02232622-W 20100808/100807000007-d4619eab5a84d2b25efc23746981d4cc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |