SOURCES SOUGHT
J -- DD CGC EDISTO
- Notice Date
- 8/12/2010
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG80-11-Q-P45023
- Archive Date
- 8/20/2011
- Point of Contact
- Lori L. Ellis, Phone: 757 628 4646, Nancy M Brinkman, Phone: 757-628-4579
- E-Mail Address
-
Lori.L.Ellis@uscg.mil, Nancy.M.Brinkman@uscg.mil
(Lori.L.Ellis@uscg.mil, Nancy.M.Brinkman@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to the USCGC EDISTO (WPB-1313), a 110 FOOT A CLASS PATROL BOAT. The 110 FOOT CLASS A PATROL BOAT is home ported in SAN DIEGO, CA. The contractor shall perform all work at the contractor's facility. The performance period will be FIFTY-NINE (59) calendar days with a start date on or about 12 JANUARY 2011. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC EDISTO (WPB-1313). This work will include, but is not limited to: (1-D) Routine DryDocking (2-D) Provide Temporary Logistics (3-D) Clean and Inspect Fuel Service Tanks (4-D) Clean and Inspect Fuel Stowage and Overflow Tanks (5-D) Clean and Inspect Oil and Oily Waste Tanks (6-D) Clean and Inspect Sewage Collection and Holding Tanks (7-D) Clean and Inspect Grey Water Collection and Holding Tanks (8-D) Perform Air Test of Interior Compartments (9-D) Appendages (u/w), Leak Test (10-D) Appendages (u/w) Internal Preserve (11-D) Clean Sewage Piping System (12-D) Clean Grey Water Piping System (13-D) Clean and Disinfect potable Water Tanks (14-O) Preserve and Disinfect Potable Water tanks-100% (15-O) Preserve Sewage Collection and Holding Tanks-Partial (16-O) Preserve Sewage Collection and Holding Tanks-100% (17-O) Preserve Grey Water Collection and Holding Tanks - Partial (18-O) Preserve Grey Water Collection and Holding Tanks - 100% (19-D)Preserve Oil and Oily Water Tanks - Partial (20-O)Preserve Oil and Oily Water Tanks - 100% (21-O) Inspect MDE Exhaust System (22-D) Remove, Inspect, and Reinstall Propellers (23-O) Repair Propeller Root Erosion (24-D) Remove, Inspect, and Reinstall Propeller Shafts (25-D) Overhaul Mechanical Shaft Seal Assemblies (26-D) Renew Water-Lubricated Shaft Bearings (27-D) Clean and Inspect Heat Exchangers (28-D) Overhaul and Renew Sea Valves (29-D) Overhaul and Renew Firemain Valves (30-D) Overhaul and renew Bilge and Ballast Valves (31-D) Overhaul Duplex Sea Strainers (32-D) Overhaul Stabilizing Fins (33-D) Overhaul Steering Gear Components (34-D) Remove, Inspect, and Reinstall Rudder Assemblies (35-D) Inspect and Renew Cathodic Protection System (36-D) Renew CAPAC Anode Assembly (37-D) Renew Speed Doppler and Overhaul Doppler Valve (38-D) Renew Dept Indicating Transducer (39-D) Preserve Underwater Body - "Partial" (40-O) Preserve Underwater Body - "100%" (41-D) Preserve Stern Tubes (42-D) Perform Ultrasonic Thickness Measurements (43-D) Perform Alignment Inspections (44-O) Perform Aluminum Hull and Structural Repairs - ¼" Plate (45-O) Perform Aluminum Hull and Structural Repairs -3/16" Plate (46-O) Perform Aluminum Hull and Structural Repairs -5/16" Plate (47-O) Perform Hull and Structural Plating Repairs - Crack (Aluminum) (48-O) Perform Hull and Structural Plating Repairs - Eroded Welds (Aluminum) (49-O) Perform Hull and Structural Plating Repairs - Overlay Welding (Aluminum) (50-O) Perform Steel Hull and Structural Plating Repairs (5-Pound) (51-O) Perform Steel Hull and Structural Plating Repairs (7.5-Pound or 7.65 Pound)) (52-O) Perform Hull and Structural Plating Repairs - Crack (Steel) (53-O) Perform Hull and Structural Plating Repairs - Eroded Welds (Steel) (54-O) Perform Hull and Structural Plating Repairs - Eroded Welds (Steel) (55-D) Reseal Cosmetic Polymeric Deck Covering Systems (56-D) Preserve Forward Peak Compartment - Partial (57-O) Preserve Forward Peak Compartment - 100% (58-D) Preserve Forward Void (59-D) Preserve Bilge Surfaces in Forward Auxiliary Machinery Space (60-D) Preserve Bilge Surfaces in Engine Room (61-D) Preserve Bilge Surfaces in AFT Machinery Space (62-D) Preserve Bilge Surfaces in AFT Steering (63-D) Inspect FM-200 Fixed Fire Suppression System (64-D) Install New Anchor Windlass (A-O) Composite Labor Rate (B-D) GFP Report (NSP) (Z-O) Laydays All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, this acquisition is expected to be issued Full and Open with no set aside. However, in accordance with FAR 19.1305, if your firm is HUBZone certified or 19.1404 if you firm is SDVOSB or 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Lori.L.Ellis@uscg.mil or by fax (757) 628-4628. Questions may be referred to Lori Ellis at (757) 628-4646. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable. Contractors are reminded that should this acquisition become a HUBZone set aside, SDVOSB Small Business or Small Business set aside, FAR 52.219-3, Notice of Total HUBZone Set-Aside or 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside or 52.214-6, will apply, which requires that at least fifty (50) percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small business concerns. Your response is required by 20 AUGUST 2010 at 1100 AM EST. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in a small business set-aside. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG80-11-Q-P45023/listing.html)
- Record
- SN02238837-W 20100814/100812235802-6d8bf311c097b5d28940ce999764d4aa (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |