SOLICITATION NOTICE
16 -- NASA DFRC AIRCRAFT MOBILE RESPIRATORY AND VENTILATING SYSTEMS
- Notice Date
- 8/24/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- NASA/Dryden Flight Research Center, Code A, P.O. Box 273, Edwards, CA 93523-0273
- ZIP Code
- 93523-0273
- Solicitation Number
- NND10355669Q
- Response Due
- 9/8/2010
- Archive Date
- 8/24/2011
- Point of Contact
- Brian G. Bowman, Contracting Officer, Phone 661-276-3329, Fax 661-276-2904, Email Brian.G.Bowman@nasa.gov - Gail Anton, Acquisition Support Contractor, Phone 661-276-5417, Fax 661-276-3374, Email gail.anton-1@nasa.gov
- E-Mail Address
-
Brian G. Bowman
(Brian.G.Bowman@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/DFRC has a requirement to purchase 1 each Aircraft Mobile Respiratory andVentilating System.Brand Name or Equal to Requirements, Specifications and Evaluation Criteria:Note 1: MAV-3E system (item 1) includes one AF-178. An additional AF-178 is required(item 5).Note 2: MAV-8E system (item 3) includes three RC-60s and one box CF8080s. AdditionalRC-60s (item 5) and CF8080s (item 6) are required. *Indicates this specification is not a hard requirementMAV-3E Mobile Aircraft Fuel Tank Ventilating System (Brand Name or Equal)1)The Mobile Aircraft Fuel Tank Ventilating System must be a complete system containing:a. 1 Each Electric Driven Explosion Proof 8 Blower with attached 50 Static BondingCable Assembly (Part Number AF-178E). NSN 4140-01-306-9138b. 4 Each Conductive Ducting 8 x 15 with built-in Storage Device and J-Slot QuickDisconnects Ends (Part Number NFRA-8X). NSN 4720-01-324-0233c. 1 Each Intake Air Filter Adapter for 8 Blower (Part Number AP-3). NSN1660-01-492-7768d. 1 Each Reusable Container (Part Number RAC-3). NSN 8145-01-492-77772) Reusable Storage Container Overall DimensionsLength 38 Width 38 Height 393) Reusable Container Requirementsa. Rotationally molded MDPE Plasticb. Recessed Hardware Stainless Steelc. Molded Tongue-in-groove gasketed parting lined. Pressure relief valvee. Removable lidf. Forest Green Color*g. Recessed Handles on left, right, front and rear side (Set of 8)h. Attached Aluminum inner compartment dividers4) Total System Weight235 lbs.5) Required Power Supply115 volt, Single Phase, 60 Hz, 20 amp fuse circuitry6) Ventilator Requirementsa. 1300 cfm outputb. Weight 105 lbs.c. Designed for Class 1, Division 1 working environments under National Electric CodeDefinitiond. 50-Ft. attached electrical cord7) General Requirementsa. Able to ventilate one or multiple Aircraft Fuel Tanks at onceb. All equipment stores within reusable containerc. Operate with existing power supplies including FL-1D or NF-2D portable generatorlightalls.d. Off the shelf, commercially availablee. Designed specifically for Aircraft Tank Ventilationf. Capability to purge and exhaust Fuel Vapors completely away from Aircraft Locationg. Able to force fresh air into tank or to exhaust fuel vapors outh. Entire System designed to dissipate and relax Static Electrical Charges.MAV-4E Fuel Tank Ventilating Kit (Brand Name or Equal)1) The Fuel Tank Ventilating Kit must be a complete kit containing:a. 1 Each 8 to 4 Air Duct Reducer Adapter (Part Number NF-808) NSN 4730-01-442-1804b. 4 Each Static Conductive Ducting 4 Diameter x 15ft. with J-Slot Quick DisconnectEnds NSN 4720-01-431-9628c. 1 Each Reusable Container (Part Number RAC-434)2) Reusable Storage Container Overall DimensionsLength 38 Width 38 Height 233) Reusable Container Featuresa. Rotationally molded MDPE Plasticb. Recessed Hardware Stainless Steelc. Molded Tongue-in-groove gasketed parting lined. Pressure relief valvee. Removable lidf. Forest Green Color*g. Recessed Handles on left, right, front and rear side (Set of 8)4) Total System Weight 100 lbs.5) General Requirementsa. Designed to connect to and operate with the Rhine Air MAV-3E (or equal)b. All equipment stores within the reusable containerc. Able to exhaust fuel vapors or to supply continuous air exchanged. Off the shelf, commercially availablee. Designed to dissipate and relax static electrical chargesf. Storage Container shall features a matching external rib design with the MAV-3E (orequal) container, enabling stacking and stabilizing capability when transporting bothcontainersMAV-8E Mobile Aircraft Fuel Tank Respiratory Protection System (Brand Name or Equal) 1) Aircraft Fuel Tank Respiratory Protection System must be a complete system containing:a. 1 Each Electric Driven, Explosion Proof rated Ambient Air Breathing Pump ( Part NumberNF23-1) NSN 4310-01-339-7785b. 3 Each Full Face adjustable Respirator Mask with Matching 100 ft. of Air Hose andQuick Disconnect Fittings NIOSH approved (Part Number RC-60) NSN 4240-01-573-5871c. 1 Each Box of 10 Replacement Filter Cartridges for Air Pump (Part Number CF8080) NSN4240-01-084-0921d. 1 Each Breathing Pump Storage Container (Part Number RAC-8)e. 1 Each Respirator Equipment Storage Container (Part Number RAC-9)2) Breathing Pump Reusable Storage Container Overall DimensionsLength 43' Width 31' Height 28'3) Breathing Pump and Storage Container Weight235 Lbs.4) Respirator Equipment Reusable Storage Container Overall Dimensions Length 30' Width30' Height 22'5) Respirator Equipment and Storage Container Weight 105 Lbs.6) Reusable Container Requirementsa. Rotationally molded MDPE Plasticb. Recessed Hardware - Stainless Steelc. Molded Tongue-in-groove gasketed parting lined. Pressure relief valvee. Removable lidf. Forest Green Color*g. Multiple Recessed Lifting Handles7) Required Power Supply Electrical Current 115 volt, Single Phase, 60 Hz8) Breathing Pump Output Capacitya. Air Volume: 15 cfmb. Air Pressure: 15 psic. Able to operate up to three full face supplied air respirator assemblies at once9) General Requirementsa. Designed specifically for personnel that enter aircraft fuel tanksb. Provide clean, oil-less ambient air deliveryc. Operate with existing power supplies including FL-1D or NF-2D portable generatorLightallsd. Electrically driven, explosion proof designe. Operates up to three NIOSH approved supplied air respirators at a timef. HEPA Air Filtration capacityg. Off the shelf, commercially availableRC-60 Airline Respiratory Assembly (Brand Name or Equal) 1) Must be a complete assembly including respirator mask and hose2) Complete National Institute for Occupational Safety and Health (NIOSH) approvedconstant flow type full face respirator maska. Adjustable head strapsb. Wide viewing lensc. Built-in speaking diaphragm3) 100 ft. hose witha. quick-disconnect fittingsb. belt clipc. non-kinkable waist to mask breathing tubed. Assembled and ready to plug-in to Rhine Air (or equal) Breathing PumpAF-178 Electric Driven Explosion Proof Blower (Brand Name or Equal)1) Physical / Performance Requirementsa. Portableb. Electric Driven Explosion-Proof 8 Centrifugal Blowerc. Completely wired with capability to vent with both a Positive and Negative airdischarged. One horsepower Electric Explosion proof rated motor UL listed for Class 1 Group Ddrives a non-ferrous, aluminum Impeller Wheele. Blower shall include two J Slot Quick Disconnect Duct Adapter Platesf. Blower displacement 1500 CFM at 3450 RPM. g. Motor shall be factory wired for 115 volt, single phase, 60 cycle. h. Blower unit shall include 50 ft. electrical cord, carrying handles, M.S. typegrounding plug receptacle, explosion proof rated switch and plugi. Built-in cord storage holderj. All electrical components included with this blower unit shall be UL rated for Class1, Division 1 work areas.CF8080 Replacement Filters (Brand Name or Equal)1) Physical / Performance Requirementsa. Disposableb. Designed and tested to function on the Rhine Air Breathing Pumps (or equal) c. Retention Efficiencies Up to 93% or 0.1 micron particlesThis notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the onlysolicitation, which is issued as a Request for Quotation (RFQ); quotes are beingrequested and a written solicitation will not be issued. Offerors are required to usethe On-Line RFQ system to submit their quote. The On-line RFQ system is linked above orit may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=. Theinformation required by FAR Subpart 12.6 is included in the on-line RFQ.The Government intends to acquire a commercial item using FAR Part 12 and the SimplifiedAcquisition Procedures set forth in FAR Part 13.Questions regarding this acquisition must be submitted in writing (e-mail is preferred)no later than September 6, 2010 at 4:30pm local time. Quotes/proposals are due no laterthan September 8, 2010 at 4:30pm local time. It is the quoter's responsibility to monitorthis site for the release of amendments (if any). Potential quoters will be responsiblefor downloading their own copy of this notice, the on-line RFQ and amendments (if any).An ombudsman has been appointed - See NASA Specific Note 'B'.Any referenced notes may be viewed at the following URLs link below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/DFRC/OPDC20220/NND10355669Q/listing.html)
- Record
- SN02252623-W 20100826/100824235307-68b926b445bb01cc84f3daae23ecda61 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |