SOLICITATION NOTICE
36 -- HYDRAULIC ACTUATORS
- Notice Date
- 8/25/2010
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333995
— Fluid Power Cylinder and Actuator Manufacturing
- Contracting Office
- NASA/Dryden Flight Research Center, Code A, P.O. Box 273, Edwards, CA 93523-0273
- ZIP Code
- 93523-0273
- Solicitation Number
- NND10347212Q
- Response Due
- 9/8/2010
- Archive Date
- 8/25/2011
- Point of Contact
- Robbin Kessler, Contracting Officer, Phone 661-276-3761, Fax 000-000-0000, Email robbin.m.kessler@nasa.gov - Bobbie Gene Blue, Acquisition Specialist, Phone 661-276-2495, Fax 661-276-2243, Email bobbie.g.blue@nasa.gov
- E-Mail Address
-
Robbin Kessler
(robbin.m.kessler@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/DFRC has a requirement for Hydraulic Actuators, Item #1 - Quantity 2,Actuator, 3.25 inch bore 6 inch stroke, HV2, Item #2 - Quanity 4, 6 inch bore x 8 inchstroke X 2 1/2 inch rod diameter. 6 inch effective stroke, HV2.Specifications are:Item #1 - Quantity 2, ActuatorsNASA Dryden FLL E6 Hydraulic Actuator Specifications3.25 Inch Bore 6 Inch Stroke, 6/18/10 Parameters for E6 Specs. (3.25 Bore 6 Stroke)Actuator: Bore Diameter (inches)3.25Rod Diameter (inches)1.375Rod End (Style 5) 1-14 UNF-3A x 2.00Effective Stroke (inches) 6.0Stop Tube Head End (inches) NoneMounting Style Fixed Clevis (Equiv. to Miller Model 84-B)Mounting Pin (inches, +0/-.003) 1.0Cushions NonePiston Ring Low friction, proportional controlPort Type #8 SAE (-16 female threads)Port Location Head & Cap, Position 4Quick Disconnect Type Aeroquip 5608-8-10S head, 5610-8-10S cap, or Parker equivalentHydraulic Operating Pressure (Max. PSI) 3000Compression Force* (Push; Min. LBS) 20,400 Tension Force* (Pull; Min. LBS) 18,400Fluid Type MIL-H-83282C (red oil)Fluid Temp. (Nominal)97FFluid Temp. Range 70F to 120FActuator Operating Temp. Range 40F to 130FManufacturer Best AvailableModel Equiv. to Miller Series HV2, Model 84BPressure Test Cert. YesLRT:Repeatability (inches) 0.001Max. Non-linearity (% FS) 0.1Max. Stroke (inches) 6.0Pressure Rating (PSI; Min.) 3000Excitation Voltage (DC; Max.) 10Connector Location Cap Position 3 (90 from port)* Includes a minimum factor of safety of 3 for strength and buckling at full strokeItem #2 - Quanity 4, ActuatorsNASA Dryden FLL H6 Hydraulic Actuator Specifications6 Inch Bore 6 Inch Stroke, 6/18/09Parameters H6 Specs. (6 Bore 6 Stroke)Actuator: Bore Diameter (inches)6Rod Diameter (inches) 2.5Rod End (Style 2) 2.00-12NF-3A x 2.50Effective Stroke (inches) 6.0Stop Tube Head End (inches) 2.0Mounting Style Fixed Clevis (Equiv. to Miller Model 84-B)Mounting Pin (inches, +0/-.003) 2.00Cushions NonePiston Ring Low friction, proportional controlPort Type #8 SAE (-16 female threads)Port Location Head & Cap, Position 4Quick Disconnect Type Aeroquip 5608-8-10S head, 5610-8-10S cap, or Parker equivalentHydraulic Operating Pressure (Max. PSI) 3000Compression Force* (Push; Min. LBS) 84,800Tension Force* (Pull; Min. LBS) 70,000Fluid Type MIL-H-83282C (red oil)Fluid Temp. (Nominal) 97FFluid Temp. Range 70F to 120FActuator Operating Temp. Range 40F to 130FManufacturer Best AvailableModel Equiv. to Miller Series HV2, Model 84BPressure Test Cert. YesLRT:Repeatability (inches) 0.001Max. Non-linearity (% FS) 0.1Max. Stroke (inches) 6.0Pressure Rating (PSI; Min.) 3000Excitation Voltage (DC; Max.) 10Connector Location Cap Position 3 (90 from port)* Includes a minimum factor of safety of 3 for strength and buckling at full stroke.This notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the onlysolicitation, which is issued as a Request for Quotation (RFQ); quotes are beingrequested and a written solicitation will not be issued. Offerors are required to usethe On-Line RFQ system to submit their quote. The On-line RFQ system is linked above orit may be accessed at http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=C&pin=. The information required by FAR Subpart 12.6 is included in the on-line RFQ.The Government intends to acquire a commercial item using FAR Part 12 and the SimplifiedAcquisition Procedures set forth in FAR Part 13.Questions regarding this acquisition must be submitted in writing (e-mail is preferred)no later than August 30, 2010.Quotes/Proposals are due no later than 4:30 p.m. localtime on September 7, 2010. It is the quoter's responsibility to monitor this site for therelease of amendments (if any). Potential quoters will be responsible for downloadingtheir own copy of this notice, the on-line RFQ and amendments (if any).An ombudsman has been appointed - See NASA Specific Note 'B'.Any referenced notes may be viewed at the following URLs link below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/DFRC/OPDC20220/NND10347212Q/listing.html)
- Record
- SN02253956-W 20100827/100825234956-b946b7d3c1c09096f6aa4b5341129860 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |