SOURCES SOUGHT
34 -- Precision Tool Room Lathe
- Notice Date
- 8/9/2010
- Notice Type
- Sources Sought
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- Department of the Treasury, United States Mint (USM), Denver Procurement Office, 320 West Colfax Avenue, Denver, Colorado, 80204
- ZIP Code
- 80204
- Solicitation Number
- SOO6222010
- Archive Date
- 9/3/2010
- Point of Contact
- Sheri Lynn Sazpansky, Phone: 3034054613, Adrian Wilson, Phone: 303-405-4844
- E-Mail Address
-
sheri.sazpansky@usmint.treas.gov, adrian.wilson@usmint.treas.gov
(sheri.sazpansky@usmint.treas.gov, adrian.wilson@usmint.treas.gov)
- Small Business Set-Aside
- N/A
- Description
- June 22, 2010 U.S. MINT DENVER MACHINE SHOP NAWCTSD Navigation Text Version Statement Of Objectives (SOO) For Tool Room Lathe Prepared By: Adrian M. Wilson Approved By: 1.0 Overall Objectives: The overall objective of this purchase is to replace the South bend 1307 tool room lathe purchased in 1973 which is worn out to the point that accuracy is no longer possible. The aforementioned lathe is currently not in service due to the unavailability of replacement parts. The new lathe must be a Hardinge HLV® Super - Precision Tool room Lathe or its equivalent. 2.0 Contract Objectives: The following additional information is provided for contract clarification: a. New Precision Inch/Metric Tool Room Lathe complete b. Spindle Capacity a. With Round 5C Collets - 1 1⁄16"/27mm b. With Hexagon 5C Collets -7⁄8"/22mm c. With Square 5C Collets - ¾"/19mm d. With Step Chucks - 6"/152mm e. Jaw Chucks - 5"/127mm f. With Expanding Collets - 3"/76mm c. Spindle Configuration - 5C Tapered Nose d. Hole Through Spindle 1 ¼"/31mm e. Infinitely Variable Spindle Speeds 125 to 3,000 rpm f. Capacity a. Swing Over Bed - 11"/279mm b. Swing Over Carriage - 9"/228mm c. Swing Over Cross Slide - 6"/152mm d. Between-Centers Distance - 18"/457mm e. Compound Slide Travel - 3"/76mm f. Carriage Power Feed Range - 5⁄16" to 7ipm; 8 to 178mm/min g. Cross Slide Power Feed Range - 3⁄16" to 4ipm; 5 to 102mm/min h. Coolant Sump Capacity - 3 US Gallons/11.4 liters g. Tailstock a. Morse Taper Center - MT No. 2 b. Tailstock Spindle Diameter - 1 3⁄8"/35mm c. Tailstock Spindle Travel - 3 ¾"/95mm h. Miscellaneous a. Digital Readout b. Lamp c. Base L18 Tool Holder d. Parting Tool e. Knurling Tool f. Tool Holders g. Round Shank h. Selection of Chucks, Shanks, and Centers 3.0 Engineering objectives: a. Purchase, and ensure delivery, installation and support for a new tool room replacement lathe. 4.0 Program Objectives: a. To be capable of producing several part types that require small lathe accuracy including parts for Numismatic Branch. b. Day to day maintenance machining of small accurate parts for vault doors, scales, coin counters, and other equipment. c. Allow Machinists and Toolmakers to work more efficiently by increasing the speed and accuracy of the work they perform due to higher spindle speeds.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/TREAS/USM/DPO/SOO6222010/listing.html)
- Place of Performance
- Address: 320 west Colfax Avenue, Denver, Colorado, 80204, United States
- Zip Code: 80204
- Zip Code: 80204
- Record
- SN02233544-W 20100811/100809234940-37cbb7c0ec615b72efc49ed45e45d45e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |