Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 16, 2010 FBO #3218
SOLICITATION NOTICE

23 -- Utility Vehicles

Notice Date

9/14/2010
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336112 — Light Truck and Utility Vehicle Manufacturing
 

Contracting Office

Department of the Air Force, Air Education and Training Command, Maxwell AFB Contracting Squadron, 50 LeMay Plaza South, Bldg 804, Maxwell AFB, Alabama, 36112-6334
 

ZIP Code

36112-6334
 

Solicitation Number

Wilson-F2XTB90209A001-UTV
 

Archive Date

10/5/2010
 

Point of Contact

C. Byron Wilson, Phone: 334-953-6606, David C. Moore, Phone: 334-953-6615
 

E-Mail Address

charles.wilson@maxwell.af.mil, David.Moore2@maxwell.af.mil
(charles.wilson@maxwell.af.mil, David.Moore2@maxwell.af.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

GENERAL INFORMATION The 42nd Contracting Squadron, 50 LeMay Plaza, Bldg 804, Maxwell AFB, AL has a requirement to purchase items as described in the Schedule of Supplies/Services, below. This is a streamlined combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only notice. A written solicitation will not be issued. This requirement is issued as a request for quote (Reference-Number Wilson-F2XTB90209A001-UTV). The solicitation document and incorporated provisions and clauses are those in effect the Federal Acquisition Circular 2005-43 (2 Aug 2010) and the Defense Federal Acquisition Regulation Supplement (DFARS) change notice 20100908. It is the contractor's responsibility to become familiar with applicable clauses and provisions. A Firm Fixed Priced Award will be made to the responsible offeror whose quote will provide the best value to the Government, NAICS Code: 336112 size standard: 1,000 employees IMPORTANT NOTE: THE GOVERNMENT IS SOLICITING FOR "OPEN MARKET" QUOTES ONLY. GENERAL SERVICES ADMINISTRATION (GSA) QUOTES WILL NOT BE CONSIDERED. NATURE OF ACQUISITON: The 908th Maintenance Group has a requirement to purchase utility vehicles. The Schedule of Supplies/Services provides all items and quantities required. SCHEDULE OF SUPPLIES/SERVICES: This acquisition is for the purchase of the following items: CLIN 0001: Manufacturer: Kawasaki, Part Number: KAF950GAF, Mule 4010 trans diesel 4X4 OR EQUAL. If offering an "OR EQUAL" item, it must meet the following specifications: Steel cab system with dome light and windshield wiper kit. Front and rear steel doors, heavy duty springs Load capacity - 1,330 lbs Cargo bed capacity - 400 lbs (4 person mode), 800 lbs (2 person mode) Cargo Bed Dimensions: Approximately 50.4 x 47.7 x 11.3 in. (2-person) 30.3 x 47.7 x 11.3 in. (4-person) Towing capacity - 1,200 lbs Weight - 1737 lbs; Fuel capacity - 6.4 gal; Top speed - 25 mph, governed; Lights - Two 30-watt sealed beam headlights and two 5/21 watt taillight/stoplight; Instruments: Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet, speedometer; Color - Dark Royal Red; Flipper seat that will allow for increased passengers (2 or 4 individuals) or increased cargo (400 lbs. or 800 lbs.); Engine Four-stroke, three-cylinder, liquid-cooled, OHV, diesel; Displacement 953cc; Bore x stroke 72.0 x 78.0mm; Compression Ratio 24.8:1; Transmission: Automatic Power-Drive System, with reverse, dual range, 2WD/4WD; Final Drive Shaft, selectable four-wheel drive with dual-mode rear differential; Tire, rear Tubeless 23 x 11-10; Wheelbase 85.2"; Turning radius 12.5'; Brakes Four-wheel hydraulic drums, sealed; Suspension - front Independent MacPherson strut / 3.9 in.; Suspension - rear Semi-independent, DeDion axle with leaf springs and shocks / 2.8 in. Ground clearance 7.0 in; Roll over protective structure (ROPS) This structure must meet ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure must meet FMVSS 216 Roof Crush resistance requirements; Fuel capacity 6.4 gal. Steering Electric power steering assisted rack-and-pinion; Exhaust Muffler with USFS-approved spark arrestor; Curb weight: Approximately 1737 lbs.; Air Filter-Snorkel-type with cyclone-type two-stage dry replaceable element Oil Filter Automotive-type spin-on canister Dimensions: L-130.1"; W-58.5"; H-75.8" Minimum of 12 Months Warranty Quantity: 19 Each. CLIN 0002: Shipping, MUST BE INCLUSIVE. QUOTATION PREPARATION INSTRUCTIONS To ensure timely and equitable evaluation of quotes, offerors must comply with the following instructions. Quotes must be complete, self-sufficient, and respond directly to the requirements of this RFQ. a. By submitting a quote the offeror accedes to all solicitation requirements, including technical, and the terms and conditions, including the specifications (CLINs 0001) of this requirement. b. FAR 52.212-1 Instructions to Offerors-Commercial applies to this acquisition. c. Offerors must include a completed copy of the provision at DFARS 252.212-7000, Alternate I, Offeror Representations and Certifications - Commercial Items and DFARS 252.225-7000, Buy American Act Certificate with quotation. d. Offerors must provide a unit price and extended price for all items referenced in the "SCHEDULE OF SUPPLIES/SERVICES". e. Interested parties capable of providing the requirement must submit a written quote to include discount terms, tax identification number, cage code, and DUNS. f. The vendor shall provide full specification details for comparability. Vendor must provide an estimated time of delivery. Please submit signed and dated quotes on company letterhead with unit prices, unit total prices and total offer amount to include shipping costs. g. The required delivery date is 45 days or earlier, after receipt of order. Vendor must provide firm delivery date with quote. h. This equipment must not be used/refurbished, out-of-date or end of life in its life cycle. Equipment that is considered gray market will not be accepted. The manufacturer must certify all equipment before delivery and warranty all equipment afterwards. i. Interested vendors shall submit open market quotes for all items of "SCHEDULE OF SUPPLIES/SERVICES" listed. Partial quotes will not be accepted. To be eligible to receive an award resulting from this RFQ, contractors must be registered in the DoD Central Contractor Registration (CCR) database, no exceptions. To register, please visit http://www.ccr.gov or by calling 1-888-227-2423. IMPORTANT NOTE: Multiple Offerors nor Multiple Awards will be considered. A single award will be made in the resultant contract. BASIS FOR AWARD This is a competitive, best value, acquisition utilizing simplified acquisition procedures authorized by FAR 13.5 -- Test Program for Certain Commercial Items. Award will be made to the responsible offeror based on technical acceptability and price as follows: Technical: Technical proposals will be evaluated on a pass/fail basis. The government will evaluate the Offerors' quote to ensure proposed Utility Vehicle accedes to the solicitation requirement, (i.e., Part Number: Kawasaki Mule 4010 Trans 4x4 or equal). Prices will be evaluated for fair and reasonableness, on a Total Price Basis, by a comparison of proposed prices submitted in response to the RFQ. Quotes will be evaluated to determine which Offerors' quote represents the best value to the Government. The Offeror's quote should demonstrate a clear understanding of the nature of the requirement. The technically acceptable quote with the lowest evaluated price will be determined the best value to the Government. The Government intends to award a contract without discussions with respective offerors. The Government, however, reserves the right to conduct discussions if deemed in its best interest. CONTRACT TERMS AND CONDITIONS: The following clauses apply: By reference: 52.204-7: Central Contractor Registration 52.211-6: Brand Name or Equal 52.212-4: Contract Terms and Conditions -- Commercial Items 252.204-7004: Alternate A By Full Text: FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, and the following additional FAR clauses under paragraph (b) are applicable: 52.203-6, Restrictions on Subcontractor Sales to the Government 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns 52.219-8, Utilization of Small Business Concerns 52.219-28, Post Award Small Business Program Rerepresentation 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36, Affirmative Action for Workers with Disabilities 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds Transfer DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders applies to this acquisition, and specifically the following clauses under paragraphs (a) and (b) are applicable: 52.203-3, Gratuities 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.211-7003 Item Identification and Valuation 252.225-7021, Trade Agreements 252.232-7003, Electronic Submission of Payment Requests 252.243-7002, Requests for Equitable Adjustment 252.247-7023 Alt I, II, Transportation of Supplies by Sea 52.252-2, CLAUSES INCORPORATED BY REFERENCE This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): http://farsite.hill.af.mil (End of clause) AFFARS 5352.201-9101 Ombudsman (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, [Insert names, addresses, telephone numbers, facsimile numbers, and e-mail addresses]. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.. (End of clause) MAXWELL 114 REQUIRED POSTERS (FEB 2003) Please utilize the following website to access and download as appropriate EEO posters, Service Contract posters, and disability posters required in accordance with 52.222-26, 52.222-41, and 52.222-36 respectively. http://www.dol.gov/osbp/sbrefa/poster/main.htm (End of Clause) Maxwell 119 WAWF-ELECTRONIC SUBMISSION OF INVOICE JAN 2007 Reference DFAR Clause 252.232-7003 "ELECTRONIC SUBMISSION OF PAYMENT REQUESTS." Invoices shall be submitted and accepted using Wide Area Workflow (WAWF) web-based system at https://wawf.eb.mil. For information on WAWF including web-based training, visit the web-site and click on "About WAWF". The web-site also contains detailed instructions for setting up your computer to achieve the best results with the system. If you have additional questions contact the WAWF-RA Customer Helpdesk at (866) 618-5988, Option 2 The following information codes will be required to submit your invoices correctly through WAWF: SELECT TYPE OF INVOICE: Contract Specialist/Administrator select only one (1) of the following: 1 Invoice and Receiving Report (Combo) (Creates two documents, an Invoice and a Receiving Report, within one data entry session (Combo). Creating both documents at the same time, rather than separately, is recommended. 0 Construction Invoice (Creates a Construction Payment Invoice from a contract for construction. Both an Inspector and a Contracting Officer must review and accept). Contract Number: Block 2 of the SF1449 Form (If this is a GSA Delivery Order award, enter the GSA NUMBER) Delivery Order: Block 4 of (Order Number) of SF1449 No Dashes - (if applicable) Pay DoDAAC: Block 16a (Payment will be made by) of SF1449 - Pay DoDAAC code is used to route documents to the Defense Finance Accounting office responsible for payment. The accounts payable mailing address can be located in Block 18a of SF1449. You can easily access payment information using the DFAS web site at http://www.dod.mil/dfas. Your contract/purchase order number or invoice will be required to inquire status of your payment. Issue by DoDAAC: Block 9 (Issued by) of SF1449. Contracting office that issued your contract - WAWF uses the code to route the document to the base. Admin DoDAAC: Block 16 (Administered by) of SF1449) Ship-To Code: Block 15 (Deliver To) of SF1449 - This is a crucial piece of information. It will be different for almost every contract issued. Ship-From Code: Not a required field for Air Force contracts. Inspected by DoDAAC: Block 15 (Deliver to) of SF1449 - If an inspection is called for in the document, then you must provide the DoDAAC/Ext this code identifies the inspector. Service Acceptor: Block 15 (Deliver to) of SF1449 - It is used to route documents to receiving service acceptor in WAWF. LPO DoDAAC/Ext: Not a required field for Air Force contracts. ADDITIONAL E-MAIL NOTIFICATIONS: The VENDOR and the DFAS Office will automatically receive a notice; after clicking SUBMIT WAWF will prompt for additional email submissions. The following E-Mail addresses MUST be input in order to prevent delays in processing: Receiver/Acceptor: Cathy.Britt@maxwell.af.mil Contract Specialist: Charles.Wilson@maxwell.af.mil Contracting Officer: Gladys.Johnson@maxwell.af.mil In addition to the requirement of this local clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests. (End of Clause) The following provisions apply: FAR 52.212-1, Instructions to Offerors, Commercial Items (Jan 2004), applies to this acquisition and is addended to delete paragraphs (e) Multiple offers and paragraph (h) Multiple Awards. FAR 52.212-3, ALT 1 Offerors are reminded that Representations and Certifications are maintained at the following website: http://orca.bpn.gov/publicserach.aspx. In the event Representations and Certifications are not on file, Offerors must include a completed copy of the provisions at FAR Part 52 or on on-line at http://farsite.hill.af.mil. DFARS 252.225-7022, Trade Agreements Certificate - Inclusion of Iraqi End Products FAR 52.252-1 -- Solicitation Provisions Incorporated by Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil. (End of Provisions) IMPORTANT NOTE: All product items sold to the Government should be properly marked with manufacturer's name and part number. Responses to this notice shall be provided in writing via e-mail to: A1C C. Byron Wilson, at charles.wilson@maxwell.af.mil. All inquiries/responses to this notice must be received by 4:00 p.m Central Daylight Savings Time (CDST) on 17 Sep 2010. Email is the preferred method. Points of Contact: C. Byron Wilson, Contract Specialist, Phone (334) 953-6606, Fax (334) 953-2856.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AETC/MaxAFBCS/Wilson-F2XTB90209A001-UTV/listing.html)
 

Place of Performance

Address: Maxwell AFB, AL, Maxwell AFB, Alabama, 36112-5948, United States

Zip Code: 36112-5948
 

Record

SN02281224-W 20100916/100914235945-c674786cc14c9edc54f1d6d999d55d00 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |