Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 22, 2010 FBO #3224
SOLICITATION NOTICE

66 -- ART 500 Chemagic Magnetic Seperation module

Notice Date

9/20/2010
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

334516 — Analytical Laboratory Instrument Manufacturing
 

Contracting Office

Department of Veterans Affairs;VA Boston Healthcare System;Contracting Officer (90C);940 Belmont Street;Brockton MA 02301
 

ZIP Code

02301
 

Solicitation Number

VA24110RQ0664
 

Response Due

9/22/2010
 

Archive Date

9/23/2010
 

Point of Contact

CHERI WICKS (NO PHONE CALLS ACCEPTED)
 

Small Business Set-Aside

N/A
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; and it is VA's intention to award this contract on a sole source basis. No telephone requests for information will be accepted; email cheri.wicks@va.gov. The submission of any data for review shall not impede award of this contract. A Limited Source Justification will be published at award. The Department of Veterans, VA Boston Healthcare System, has a requirement for a DNA Magnetic Separation Module. This is a Request for Quotes (RFQ); the solicitation number is VA-241-10-RP-0664. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular effective through August 26, 2010. This requirement is not set aside. The NAICS Code is 33451. The provision at 52.212-1, Instructions to Offerors-Commercial Items, applies to this acquisition. No addenda are included. The provision at 52.212-2, Evaluation-Commercial Items, applies to this acquisition and the criteria are technical ability, past performance, and price. A completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items shall be submitted. The clause at 52.212-4, Contract Terms and Conditions-Commercial Items applies. The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders, applies. The attached solicitation contains all applicable requirements as well as the terms and conditions. ITEM DESCRIPTION OF QTY UNIT UNIT AMOUNT NO. SUPPLIES/SVCS PRICE 1 1.00 EA ___________________ ____________________ Product Number: ART 500ART 500 Chemagic Magnetic Separation Module 1 Including chemagic 12 Rod Head, chemagic Software, PC incl OS, Display 2 1.00 EA ___________________ ____________________ Product Number: ART523ART 523 chemagic Dispensen 24 Designed for chemagic MSM 1 (art. No. 500) equipped with chemagic 24 Rod Head (art. No. 508), for the automated filling of buffers for 24 well applications. 3 1.00 EA ___________________ ____________________ Product Number: ART 999ART 999 chemagic modification to allow the dispenser to run 12 head 4 1.00 EA ___________________ ____________________ Product Number: ART 523ART 523 chemagic QA Software Software upgrade with additional features, designed for chemagic MSM 1 (art. No. 500), incl barcode scanner 5 1.00 EA ___________________ ____________________ Product Number: ART 508ART 508 chemagic 24 Rod Head Designed for chemagic MSM 1 (art. No. 500), for processing 1-24 medium volume samples 6 1.00 EA ___________________ ____________________ Product Number: ART 1035ART 1035 chemagic DNA Saliva Kit special for the automated isolation of DNA from 4 ml saliva.. (Collected with the Oragene TM system) with the chemagic MSM 1 (art. No. 500) equipped with the chemagic 12 Rod Head (art. No. 507); including disposable tips; 250 preps/unit bulk packaging. 7 1.00 EA ___________________ ____________________ Product Number: ART 1046ART 1046 chemagic DNA Buccal Swab Kit special for the automated isolation of DNA from an entire Buccal Collector Swab (Bode Technology TM) with the chemagic MSM 1 (art No.No. 500) equipped with the chemagic 24 Rod Head (art. No. No. 508); including disposable tips; 240 preps/unit bulk packaging. 8 1.00 EA ___________________ ____________________ Product Number: WARRANTYExtended Warrany contract, One-Year Agreement: - Coverage term for 12 months from initiation date - Telephone support with same day response, during Parallabs' business hours, 9:00 am - 5:00pm EST. - One preventive maintenance visit per six months - Inspection, instrument check, and replacement of worn components - On-site service repair visits, including travel and labor, if deemed necessary by Parallabs ____________________ GRAND TOTAL --- ==================== ITEM NUMBER QUANTITY DATE OF DELIVERY 1 - 8 1.00 EA SHIP TO: Bldg 35, 1st floor lab-McGeary ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The following clauses are incorporated into 52.212-4 as an addendum to this contract: 52.228-5 INSURANCE - WORK ON A GOVERNMENT INSTALLATION (JAN 1997) (a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract. (b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective-- (1) For such period as the laws of the State in which this contract is to be performed prescribe; or (2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer. (c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request. SUPPLEMENTAL INSURANCE REQUIREMENTS In accordance with FAR 28.307-2 and FAR 52.228-5, the following minimum coverage shall apply to this contract: (a) Workers' compensation and employers liability: Contractors are required to comply with applicable Federal and State workers' compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer's liability section of the insurance policy, except when contract operations are so commingled with a Contractor's commercial operations that it would not be practical to require this coverage. Employer's liability coverage of at least $100,000 is required, except in States with exclusive or monopolistic funds that do not permit workers' compensation to be written by private carriers. (b) General Liability: $500,000.00 per occurrences. (c) Automobile liability: $200,000.00 per person; $500,000.00 per occurrence and $20,000.00 property damage. (d) The successful bidder must present to the Contracting Officer, prior to award, evidence of general liability insurance without any exclusionary clauses for asbestos that would void the general liability coverage. VAAR 852.203-70 COMMERCIAL ADVERTISING (JAN 2008) The bidder or offeror agrees that if a contract is awarded to him/her, as a result of this solicitation, he/she will not advertise the award of the contract in his/her commercial advertising in such a manner as to state or imply that the Department of Veterans Affairs endorses a product, project or commercial line of endeavor. VAAR 852.211-70 SERVICE DATA MANUALS (NOV 1984) (a) The successful bidder will supply operation/maintenance (service data) manuals with each piece of equipment in the quantity specified in the solicitation and resulting purchase order. As a minimum, the manual(s) shall be bound and equivalent to the manual(s) provided the manufacturer's designated field service representative as well as comply with all the requirements in paragraphs (b) through (i) of this clause. Sections, headings and section sequence identified in (b) through (i) of this clause are typical and may vary between manufacturers. Variances in the sections, headings and section sequence, however, do not relieve the manufacturer of his/her responsibility in supplying the technical data called for therein. (b) Title Page and Front Matter. The title page shall include the equipment nomenclature, model number, effective date of the manual and the manufacturer's name and address. If the manual applies to a particular version of the equipment only, the title page shall also list that equipment's serial number. Front matter shall consist of the Table of Contents, List of Tables, List of Illustrations and a frontispiece (photograph or line drawing) depicting the equipment. (c) Section I, General Description. This section shall provide a generalized description of the equipment or devices and shall describe its purpose or intended use. Included in this section will be a table listing all pertinent equipment specifications, power requirements, environmental limitations and physical dimensions. (d) Section II, Installation. Section II shall provide pertinent installation information. It shall list all input and output connectors using applicable reference designators and functional names as they appear on the equipment. Included in this listing will be a brief description of the function of each connector along with the connector type. Instructions shall be provided as to the recommended method of repacking the equipment for shipment (packing material, labeling, etc.). (e) Section III, Operation. Section III will fully describe the operation of the equipment and shall include a listing of each control with a brief description of its function and step-by-step procedures for each operating mode. Procedures will use the control(s) nomenclature as it appears on the equipment and will be keyed to one or more illustrations of the equipment. Operating procedures will include any preoperational checks, calibration adjustments and operation tests. Notes, cautions and warnings shall be set off from the text body so they may easily be recognizable and will draw the attention of the reader. Illustrations should be used wherever possible depicting equipment connections for test, calibration, patient monitoring and measurements. For large, complex and/or highly versatile equipment capable of many operating modes and in other instances where the Operation Section is quite large, operational information may be bound separately in the form of an Operators Manual. The providing of a separate Operators manual does not relieve the supplier of his responsibility for providing the minimum acceptable maintenance data specified herein. When applicable, flow charts and narrative descriptions of software shall be provided. If programming is either built-in and/or user modifiable, a complete software listing shall be supplied. Equipment items with software packages shall also include diagnostic routines and sample outputs. Submission information shall be given in the Maintenance Section to identify equipment malfunctions that are software related. (f) Section IV, Principles of Operation. This section shall describe in narrative form the principles of operation of the equipment. Circuitry shall be discussed in sufficient detail to be understood by technicians and engineers who possess a working knowledge of electronics and a general familiarity with the overall application of the devices. The circuit descriptions should start at the overall equipment level and proceed to more detailed circuit descriptions. The overall description shall be keyed to a functional block diagram of the equipment. Circuit descriptions shall be keyed to schematic diagrams discussed in paragraph (i) below. It is recommended that for complex or special circuits, simplified schematics should be included in this section. (g) Section V, Maintenance. The maintenance section shall contain a list of recommended test equipment, special tools, preventive maintenance instructions and corrective information. The list of test equipment shall be that recommended by the manufacturer and shall be designated by manufacturer and model number. Special tools are those items not commercially available or those that are designed specifically for the equipment being supplied. Sufficient data will be provided to enable their purchase by the Department of Veterans Affairs. Preventive maintenance instructions shall consist of those recommended by the manufacturer to preclude unnecessary failures. Procedures and the recommended frequency of performance shall be included for visual inspection, cleaning, lubricating, mechanical adjustments and circuit calibration. Corrective maintenance shall consist of the data necessary to troubleshoot and rectify a problem and shall include procedures for realigning and testing the equipment. Troubleshooting shall include either a list of test points with the applicable voltage levels or waveforms that would be present under a certain prescribed set of conditions, a troubleshooting chart listing the symptom, probable cause and remedy, or a narrative containing sufficient data to enable a test technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also be provided describing the preferred method of repairing or replacing discrete components mounted on printed circuit boards or located in areas where special steps must be followed to disassemble the equipment. Procedures shall be included to realign and test the equipment at the completion of repairs and to restore it to its original operating condition. These procedures shall be supported by the necessary waveforms and voltage levels, and data for selecting matched components. Diagrams, either photographic or line, shall show the location of printed circuit board mounted components. (h) Section VI, Replacement Parts List. The replacement parts list shall list, in alphanumeric order, all electrical/electronic, mechanical and pneumatic components, their description, value and tolerance, true manufacturer and manufacturers' part number. (i) Section VII, Drawings. Wiring and schematic diagrams shall be included. The drawings will depict the circuitry using standard symbols and shall include the reference designations and component values or type designators. Drawings shall be clear and legible and shall not be engineering or productions sketches. VAAR 852.246-70 GUARANTEE (JAN 2008) The contractor guarantees the equipment against defective material, workmanship and performance for a period of, said guarantee to run from date of acceptance of the equipment by the Government. The contractor agrees to furnish, without cost to the Government, replacement of all parts and material that are found to be defective during the guarantee period. Replacement of material and parts will be furnished to the Government at the point of installation, if installation is within the continental United States, or f.o.b. the continental U.S. port to be designated by the contracting officer if installation is outside of the continental United States. Cost of installation of replacement material and parts shall be borne by the contractor. VAAR 852.273-75 SECURITY REQUIREMENTS FOR UNCLASSIFIED INFORMATION TECHNOLOGY RESOURCES (Interim - October 2008) (a) The contractor and their personnel shall be subject to the same Federal laws, regulations, standards and VA policies as VA personnel, regarding information and information system security. These include, but are not limited to Federal Information Security Management Act (FISMA), Appendix III of OMB Circular A-130, and guidance and standards, available from the Department of Commerce's National Institute of Standards and Technology (NIST). This also includes the use of common security configurations available from NIST's Web site at: http://checklists.nist.gov (b) To ensure that appropriate security controls are in place, Contractors must follow the procedures set forth in "VA Information and Information System Security/Privacy Requirements for IT Contracts" located at the following Web site: http://www.iprm.oit.va.gov/docs/Security_and_Privacy_Requirements_for_IT_Contracts_Attachment.pdf VAAR 852.273-76 ELECTRONIC INVOICE SUBMISSION (Interim - October 2008) (a) To improve the timeliness of payments and lower overall administrative costs, VA strongly encourages contractors to submit invoices using its electronic invoicing system. At present, electronic submission is voluntary and any nominal registration fees will be the responsibility of the contractor. VA intends to mandate electronic invoice submission, subject to completion of the federal rulemaking process. At present, VA is using a 3rd party agent to contact contractors regarding this service. During the voluntary period, contractors interested in registering for the electronic system should contact the VA's Financial Services Center at http://www.fsc.va.gov/einvoice.asp. VAAR 852.252-70 SOLICITATION PROVISIONS OR CLAUSES INCORPORATED BY REFERENCE (JAN 2008) The following provisions or clauses incorporated by reference in this solicitation must be completed by the offeror or prospective contractor and submitted with the quotation or offer. Copies of these provisions or clauses are available on the Internet at the Web sites provided in the provision at FAR 52.252-1, Solicitation Provisions Incorporated by Reference, or the clause at FAR 52.252-2, Clauses Incorporated by Reference. Copies may also be obtained from the contracting officer. 852.246-71INSPECTIONJAN 2008 (End of Addendum to 52.212-4) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JUL 2010) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104 (g)). (2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Pub. L. 108-77, 108-78) (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). [] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010)(Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). [] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) [] (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUL 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note). [] (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (JUL 2010) (Pub. L. 111-5). [] (6) 52.219-3, Notice of Total HUBZone Set-Aside (Jan 1999) (15 U.S.C. 657a). [] (7) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (July 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). [] (8) [Reserved] [] (9)(i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644). [] (ii) Alternate I (Oct 1995) of 52.219-6. [] (iii) Alternate II (Mar 2004) of 52.219-6. [] (10)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). [] (ii) Alternate I (Oct 1995) of 52.219-7. [] (iii) Alternate II (Mar 2004) of 52.219-7. [X] (11) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)). [] (12)(i) 52.219-9, Small Business Subcontracting Plan (JUL 2010) (15 U.S.C. 637(d)(4)). [] (ii) Alternate I (Oct 2001) of 52.219-9. [] (iii) Alternate II (Oct 2001) of 52.219-9. [] (iv) Alternate III (JUL 2010) of 52.219-9. [] (13) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)). [] (14) 52.219-16, Liquidated Damages--Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). [] (15)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer.) [] (ii) Alternate I (June 2003) of 52.219-23. [] (16) 52.219-25, Small Disadvantaged Business Participation Program--Disadvantaged Status and Reporting (APR 2008) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). [] (17) 52.219-26, Small Disadvantaged Business Participation Program--Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). [] (18) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f). [] (19) 52.219-28, Post Award Small Business Program Rerepresentation (APR 2009) (15 U.S.C 632(a)(2)). [] (20) 52.222-3, Convict Labor (June 2003) (E.O. 11755). [] (21) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JUL 2010) (E.O. 13126). [X] (22) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). [X] (23) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). [X] (24) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). [X] (25) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793). [X] (26) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). [] (27) 52.222-54, Employment Eligibility Verification (Jan 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) [] (28)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) [] (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) [] (29) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007)(42 U.S.C. 8259b). [] (30)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423). [] (ii) Alternate I (DEC 2007) of 52.223-16. [] (31) 52.225-1, Buy American Act--Supplies (FEB 2009) (41 U.S.C. 10a-10d). [] (32)(i) 52.225-3, Buy American Act--Free Trade Agreements-- Israeli Trade Act (JUN 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53 and 109-169, 109-283, and 110-138). [] (ii) Alternate I (Jan 2004) of 52.225-3. [] (iii) Alternate II (Jan 2004) of 52.225-3. [] (33) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). [X] (34) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). [] (35) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). [] (36) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). [] (37) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). [] (38) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). [] (39) 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). [X] (40) 52.232-34, Payment by Electronic Funds Transfer--Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). [] (41) 52.232-36, Payment by Third Party (FEB 2010) (31 U.S.C. 3332). [] (42) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). [] (43)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). [] (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [] (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). [] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). Employee Class Monetary Wage-Fringe Benefits [] (3) 52.222-43, Fair Labor Standards Act and Service Contract Act--Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). [] (4) 52.222-44, Fair Labor Standards Act and Service Contract Act--Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). [] (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). [] (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). [] (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009)(Pub. L. 110-247) [] (8) 52.237-11, Accepting and Dispensing of $1 Coin (SEP 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793). (vii) [Removed and reserved] (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements "(Nov 2007)" (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (FEB 2009)(41 U.S.C. 351, et seq.). (xii) 52.222-54, Employee Eligibility Verification (JAN 2009) (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009)(Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimalnumber of additional clauses necessary to satisfy its contractual obligations. Salient Characteristics Line item 1: Art 500 chemagic Magnetic Separation Module I "Sample volumes from 10 µl to 10 ml processable "High speed, 15 min. for 96 low volume blood samples "Low to high throughput (4,000 samples/d) "96 Rod Head for parallel separating and resuspending in 96 well plates "12 Rod Head for parallel separating and resuspending in 15 ml or 50 ml Falcon tubes "Enhance success rates for downstream applications "One instrument for all sample volumes (10 µl - 10 ml) "High throughput "Barcode reading included "Quality Assurance (QA) software "Can be combined with standard liquid handling units Line item 2: ART 523 chemagic Dispenser 24 "Reduced hands on time "Simultaneous filling of up to 8 different buffers with different buffer volumes "Waste of buffer is minimized "Based on membrane pump technology "Fully integrated in the chemagic MSM I software "Easy upgrade of a stand-alone chemagic MSM I (plug and play) Line item 3: ART 999 "Modification to allow the dispenser to run 12 head Line item 4: ART 523 QA Software upgrade "Barcode reading/Sample tracking "LIMS compatible log files "Up to date user management "Easy navigation and set up "Pre installed protocols "Tracking the progress of a running protocol "Controlling of all three chemagic Rod Head formats (12, 24 and 96) "Dispensing in the 6 x 4 format corresponding to the chemagic 24 Rod Head is implemented "Different dispensing formats can be used with chemagen ´s chemagic Dispenser "Selection of individual columns for dispensing is possible to save disposables "Service protocols are integrated to facilitate a convenient handling "Cleaning protocols are integrated to fasten the maintenance "Remaining time to the external step is shown to facilitate the laboratory workflow "Text files containing sample IDs/scanned bar codes can be integrated (as a txt-file) in the log file to avoid sample mix-up caused by manual enter Line item 5: chemagic 24 Rod Head "Head: 24 magnetizable rods "Format: 24-well- plates or 24 single tubes "Throughput: e.g. 288 samples/d "Sample volume: e.g. 200 µl - 2.0 ml blood "Processing time: <45 min for 24 blood samples "Power supply: 90-240V; 16A (50/60/Hz) "Dimensions (mm) : Base machine: 600 x 640 x 950 (W/D/H), Carrier axis: 1940 x 170 x 200 (W/D/H) Line item 6: ART 1035 chemagic DNA Saliva Kit special "Designed for: chemagic MSM I, 12 well format "Sample size possible: 4 ml "Number of preps.: 250 "Completion time: ~ 80 min Line item 7: ART 1048 chemagic DNA Buccal Swab Kit special "Designed for: chemagic MSM I, 24 well format "Sample size possible: 1 swab (Bode TechnologyTM) per prep "Number of preps.: 240 "Completion time: ~ 45 min "Typical yields: 10 - 25 µg DNA Line item 8: Extended Warranty Contract One Year Agreement "Coverage term for 12 months from initiation date "Telephone support with same day response, during Parallabs' business hours, 9:00am - 5:00pm EST "One preventive maintenance visit per six months "Inspection, instrument check, and replacement of worn components "Ensure and document instrument functionality "On-site service repair visits, including travel and labor, if deemed necessary by Parallabs
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BoVAMC/VAMCCO80220/VA24110RQ0664/listing.html)
 

Record

SN02289320-W 20100922/100920235334-2afa87ce34f84edf2a4e17b320954fd9 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |