SOLICITATION NOTICE
10 -- ROD ASSEMBLY, DRIVING SPRING
- Notice Date
- 10/26/2010
- Notice Type
- Presolicitation
- NAICS
- 332994
— Small Arms Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L411R0010
- Archive Date
- 12/25/2010
- Point of Contact
- Michele Beasley, Phone: 6146927572
- E-Mail Address
-
michele.beasley@dla.mil
(michele.beasley@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- ITEM DESCRIPTION FOR PR: 0027424606 ROD ASSEMBLY, DRIVING SPRING. ***************** ENGINEERING EXCEPTION DATA ******************* 11826032-Note 2: -Delete ASTM-B221/A211M and Replace with ASTM B221M OR ASTM A211M. Remove ASTM B221/A211M from the TDPL. DWG. 11826030 - Spring Return. The Verification Level(VL) shall be IV for all Major Quality Assurance Provisions(QAPs), not the III that is indicated on the drawing. Remove QS11826024, 11826328, and 11826329 from the TDP/TDPL. To all drawings and associated documents without a distribution statement, add distribution A. ************* END OF ENGINEERING EXCEPTION DATA **************** ************ SPECIAL MILITARY PACKAGING INSTRUCTIONS *********** SPI 11826024: -ADD DISTRIBUTION CODE A. -DELETE REQUIREMENTS AND ADD THE FOLLOWING NOTES: SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREON OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED RQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED. * UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-STD-2073-1. A. BAG SHALL BE NON-TOXIC, TRANSPARENT, 4 MIL THICK POLYETHYLENE FILM HAVING A MULTI-METAL VOLATILE CORROSION INHIBITOR. BAG SHALL BE FABRICATED IN ACCORDANCE WITH MIL-DTL-117 FOR A CLASS-B BAG. SUGGESTED SOURCES OF SUPPLY: MANUFACTURER PRODUCT CORTEC VpCI 126 DAUBERT-CROMWELL PREMIUM METAL-GUARD ZERUST ICT 510-C MULTI-METAL B. COMPATIBILITY PROVISIONS OF MIL-I-8574 APPLY. ************ END OF SPECIAL MILITARY PACKQAGING DATA *********** IF REQUIRED BY CONTRACT, CONTRACTOR FIRST ARTICLE TEST APPLIES. PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT POST AWARD CONTRACTING OFFICER (PCO). POST AWARD PREPRODUCTION APPROVAL VERIFYING THE REQUIREMENTS OF MIL-DTL-16232 IS REQUIRED. A CDRL (FORM 1423) AND A SUGGESTED OUTLINE THAT DETAILS PHOSPHATE COATING REQUIREMENTS/FORMAT EXIST FOR THIS MATERIAL. ADDITIVE CLIN 9910 SPECIAL TESTING IS USED TO INDICATE THIS REQUIREMENT. THE CONTRACTOR MUST PROVIDE COPIES OF MANGANESE PHOSPHATE COATING PROCEDURES WRITTEN SPECIFICALLY FOR THE COATING OF PARTS ON THIS CONTRACT TO THE PCO WITHIN 45 DAY AFTER AWARD. (EMAIL: PCO AND THE PHOSPHATE MAILBOX AT: DSCC PHOSPHATE PROCEDURE SUBMISSION@DLA.MIL) PRODUCT INSPECTION WILL OCCUR AT THE ACTUAL MANUFACTURER'S FACILITY AND IN PROCESS INSPECTIONS WILL OCCUR AT THE PHOSPHATE CONTRACTOR'S FACILITY IDENTIFIED ON THIS CONTRACT. ANY CHANGES MUST BE APPROVED BY THE PCO. ASSURE THAT THE PHOSPHATE CONTRACTOR SELECTED TO PLATE THE PARTS FOR THIS CONTRACT HAS BEEN ASSIGNED A DCMA QAR BY LETTER OF DELEGATION (LOD) FOR GOVERNMENT SOURCE INSPECTION (GSI) BY THE PRIME QAR. OVERSIGHT IS REQUIRED DURING THE PLATING PROCESS TO VERIFY CONFORMANCE TO THE DSCC APPROVED PHOSPHATE PROCEDURE. PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD 52.246-9004 MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING TESTING. PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES FROM EACH SUBCONTRACTOR AND FROM EACH PHOSPHATE CONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS CONTRACT. FIVE (5) PVT SAMPLES WILL BE REQUIRED TO BE IDENTIFIED TO THOSE SUBCONTRACTORS AND PHOSPHATE CONTRACTORS WHEN THEY ARE SENT IN FOR TESTING. DRAWING PACKAGE CITED IS SUBJECT TO EXPORT-CONTROL REGULATIONS AND DISTRIBUTION IS LIMITED TO THOSE CONTRACTORS QUALIFIED THROUGH JCP CERTIFICATION. TO APPLY FOR CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT." FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: UNITED STATES/CANADA JOINT CERTIFICATION OFFICE DEFENSE LOGISITICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE,NORTH BATTLE CREEK, MI 49017-3084. CONTRACTS WILL BE AWARDED ONLY TO THOSE CONTRACTORS WITH JCP CERTIFICATION ISSUED PRIOR TO AN AWARD. "THE DATA RELEASED PURSUANT TO THIS PROCUREMENT WAS FURNISHED UNDER A LIMITED USE LICENSE AGREEMENT WITH FABRIQUE NATIONALE HERSTAL (FNH), DAAA09-C-2018 FOR GOVERNMENT USE IN THE MANUFACTURE OF THESE ITEMS. ANY USE CONTRARY TO DFARS 252.227-7025 WILL GIVE RISE TO THIRD PARTY BENEFICIARY RIGHTS OF FNH." CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT, APPLIES. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). CRITICAL APPLICATION ITEM I/A/W DRAWING NR 19200 11826024 BASIC AMEND NR R DTD 02/04/09 TYPE NUMBER I/A/W QAP 19200 11826024 REFNO AMEND NR F DTD 02/15/02 TYPE NUMBER I/A/W DRAWING NR 19200 11826024 REFNO AMEND NR DTD 11/25/09 TYPE NUMBER I/A/W DRAWING NR 19200 11826025 REFNO AMEND NR P DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826026 REFNO AMEND NR J DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826027 REFNO AMEND NR L DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826029 REFNO AMEND NR L DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826030 REFNO AMEND NR L DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826031 REFNO AMEND NR L DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826032 REFNO AMEND NR M DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826033 REFNO AMEND NR L DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 11826034 REFNO AMEND NR K DTD 02/15/08 TYPE NUMBER I/A/W DRAWING NR 19200 12579607 REFNO AMEND NR C DTD 08/04/09 TYPE NUMBER I/A/W QAP 19200 12993884 REFNO AMEND NR B DTD 08/10/05 TYPE NUMBER I/A/W DRAWING NR 19200 L2S3025 REFNO AMEND NR D4 DTD 05/03/02 TYPE NUMBER I/A/W SPEC NR MIL-DTL-16232G REFNO AMEND NR G TYPE NUMBER I/A/W SPEC NR QPL-16173-84 NOT 1 REFNO AMEND NR 84 TYPE NUMBER I/A/W SPEC NR QPL-3150-34 NOT 1 REFNO AMEND NR 34 TYPE NUMBER
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L411R0010/listing.html)
- Record
- SN02317266-W 20101028/101026234159-af6e492ff0fc4bbb88c9a10412260b25 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |