SOLICITATION NOTICE
25 -- PARTS KIT, SPECIALIZED
- Notice Date
- 12/15/2010
- Notice Type
- Presolicitation
- NAICS
- 336992
— Military Armored Vehicle, Tank, and Tank Component Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L311R0054
- Archive Date
- 2/19/2011
- Point of Contact
- Charles E. Lee, Phone: 6146929373, Richard J Matz, Phone: 614-692-8148
- E-Mail Address
-
charles.e.lee@dla.mil, richard.matz@dla.mil
(charles.e.lee@dla.mil, richard.matz@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- NSN 2540-01-39409681 - PARTS KIT, SPECIALIZED being bought in accordance with Army (19207) drawing 57K4845 and all related data. The total quantity required is 1306 kits with 675 each to be shipped to (W25G1U) New Cumberland, PA 17070-5000 and 631 kits to be shipped to (W62G2T) Tracy, CA 95304-5000. This solicitation is an RFP and will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of 1/5/11 ; hard copies of this solicitation are not available. Technical drawings/bid sets are available after the same issue date on the Internet at http://www.dibbs.bsm.dla.mil/ then click the cFolders under the Technical Data tab. Requests should include the RFP number, opening/closing date, NSN, purchase Request Number, buyer's name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. This solicitation is 100% set-aside for small business concerns. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance. The required delivery is 135 days. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST-Quick Search and, in most cases download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shipping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DODSSP Special Assistance Desk at (215)697-6396/6257 (DSN: 442-6396/6257).Based on contract history this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Users not having access to the Internet may contact the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP. ITEM DESCRIPTION FOR PR: 0028672661 PARTS KIT, SPECIALIZED. FAT REQUIRED PER DWG 12418424 ONLY WAIVED SOURCE IS DANA/EATON CAGE 1MVZ1. ALL OFFERORS MUST EITHER PROVIDE FULL FAT DATA PER THE DRAWING OR OFFER THE DANA PART WITH FULLY TRACEABILITY. IF OFFERING THE DANA/EATON PART SOURCE INSPECTION IS WAIVED. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. KIT QUALITY PROVISION. 1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED TO THE GOVERNMENT AS A KIT. 2. THE CONTRACTOR SHALL COMPLY WITH ALL APPLICABLE QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS FOR THE KIT COMPONENTS BEING SUPPLIED. 3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR OBTAINING, HANDLING AND SUPPLYING ORIGINAL EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH ITS VENDORS. 4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT DAMAGED. 5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR PROCESS THAT WILL ENSURE TRACEABILITY OF ALL PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE MANUFACTURER. 6. THE CONTRACTOR'S INSPECTION SYSTEM AND PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE REQUEST OF THE CONTRACTING OFFICER. 7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS THAT ARE KNOWN TO BE ACCEPTABLE TO THE GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS REFLECTED IN THE GOVERNMENT'S CONTRACT TECHNICAL DATA FILE (CTDF). 8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY ONLY NEW AND UNUSED PARTS THAT ARE NOT GOVERNMENT SURPLUS PARTS. FULL AND OPEN COMPETITION APPLY CRITICAL APPLICATION ITEM I/A/W QAP 14153 QAP-00506 REFNO AMEND NR G DTD 07/07/03 TYPE NUMBER I/A/W QAP 14153 QAP-EQ001 REFNO AMEND NR B DTD 02/13/96 TYPE NUMBER I/A/W QAP 14153 QAP-EQ002 REFNO AMEND NR A DTD 03/10/03 TYPE NUMBER I/A/W DRAWING NR 19207 12418424 REFNO AMEND NR B DTD 03/23/06 TYPE NUMBER 19207 12418424-001 I/A/W DRAWING NR 19207 57K4845 BASIC AMEND NR A DTD 09/19/05 TYPE NUMBER 19207 57K4845-004
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L311R0054/listing.html)
- Place of Performance
- Address: DLA LAND and MARITIME, 3990 E. BROAD ST., COLUMBUS, Ohio, 43218, United States
- Zip Code: 43218
- Zip Code: 43218
- Record
- SN02344805-W 20101217/101215234312-81160cfaa42bcbe1dfbaff8eaec5fc4d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |