SOLICITATION NOTICE
25 -- CYLINDER, ASSEMBLY
- Notice Date
- 12/15/2010
- Notice Type
- Presolicitation
- NAICS
- 336992
— Military Armored Vehicle, Tank, and Tank Component Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L311R0055
- Archive Date
- 2/19/2011
- Point of Contact
- Charles E. Lee, II, Phone: 6146929373, Richard J Matz, Phone: 614-692-8148
- E-Mail Address
-
charles.e.lee@dla.mil, richard.matz@dla.mil
(charles.e.lee@dla.mil, richard.matz@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- NSN 2530-00-204-4800 - CYLINDER ASSEMBLY being bought in accordance with Army (19207) drawing 8357980 and all related data. The total quantity required is 4000 each to be shipped to (W25G1U) New Cumberland, PA 17070-5000. This solicitation is an RFP and will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of 1/5/11 ; hard copies of this solicitation are not available. Technical drawings/bid sets are available after the same issue date on the Internet at http://www.dibbs.bsm.dla.mil/ then click the cFolders under the Technical Data tab. Requests should include the RFP number, opening/closing date, NSN, purchase Request Number, buyer's name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. This solicitation is UNRESTRICTED. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance. The required delivery is 60 days. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST-Quick Search and, in most cases download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shipping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DODSSP Special Assistance Desk at (215)697-6396/6257 (DSN: 442-6396/6257).Based on market research and contract history this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item with 15 days of this notice. Users not having access to the Internet may contact the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP. ITEM DESCRIPTION FOR PR: 0028476220 CYLINDER ASSEMBLY,H CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST CONFORM TO SOURCE CONTROL DRAWING. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE SOURCE CONTROLLED COMPONENTS FROM SOURCES APPROVED ON THE APPLICABLE SOURCE CONTROL DRAWING." THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES "FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE." THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). I/A/W DRAWING NR 19207 12301182 REFNO AMEND NR B DTD 07/30/09 TYPE NUMBER I/A/W DRAWING NR 19207 12420325 REFNO AMEND NR E DTD 05/01/06 TYPE NUMBER I/A/W DRAWING NR 19207 12461890 REFNO AMEND NR DTD 07/16/96 TYPE NUMBER I/A/W DRAWING NR 19207 7979689 REFNO AMEND NR K DTD 07/30/09 TYPE NUMBER I/A/W QAP 19207 7979690 REFNO AMEND NR A DTD 11/27/92 TYPE NUMBER I/A/W DRAWING NR 19207 7979690 REFNO AMEND NR M DTD 07/30/09 TYPE NUMBER I/A/W DRAWING NR 19207 7979691 REFNO AMEND NR H DTD 07/30/09 TYPE NUMBER I/A/W DRAWING NR 19207 7979699 REFNO AMEND NR G DTD 07/30/09 TYPE NUMBER I/A/W QAP 19207 8357980 REFNO AMEND NR G DTD 01/25/94 TYPE NUMBER I/A/W DRAWING NR 19207 8357980 REFNO AMEND NR DTD 08/16/10 TYPE NUMBER I/A/W DRAWING NR 19207 8357980 BASIC AMEND NR V DTD 04/13/10 TYPE NUMBER I/A/W DRAWING NR 19207 TACV-5103 REFNO AMEND NR DTD 08/08/07 TYPE NUMBER
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L311R0055/listing.html)
- Place of Performance
- Address: DLA LAND and MARITIME, 3990 E. BROAD ST., COLUMBUS, Ohio, 43218, United States
- Zip Code: 43218
- Zip Code: 43218
- Record
- SN02345099-W 20101217/101215234536-86d45b90546f22ca8e96c19d88241355 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |