SOURCES SOUGHT
20 -- USCGC Cushing
- Notice Date
- 1/12/2011
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- CUSHING12JAN11
- Archive Date
- 2/10/2011
- Point of Contact
- Susan A. Kreider, Phone: 7576284644, Amanda J. Myers, Phone: 7576284660
- E-Mail Address
-
susan.a.kreider@uscg.mil, amanda.j.myers@uscg.mil
(susan.a.kreider@uscg.mil, amanda.j.myers@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to the USCGC CUSHING (WPB-1321), an 110 Foot "B" Class Patrol Boat. The vessel is homeported in Miami, FL. All work will be performed at the contractor's facility. This vessel is geographically restricted to 576 Nautical Miles one way, or 1,152 Nautical Miles, round-trip from the cutters homeport of Miami, FL. The performance period will be EIGHTY (80) calendar days with a start date of 13 July through 30 September 2011. The scope of the acquisition is for the Drydocking and repairs of the USCGC CUSHING (WPB-1321), an 110 Foot "B" Class Patrol Boat. This work will include, but is not limited to: 1.Hull Plating (U/W Body), Ultrasonic Testing 2. Steel Hull and Structural Plating Repairs 3. Steel Hull and Structural Plating Repairs 4. Appendages (U/W), Leak Test 5. Propulsion Shaft Rope Guards, Inspect and Repair 6. Appendages (U/W) - Internal, Preserve 7. Tanks (MP Fuel Service), Clean 8. Tanks (MP Fuel Stowage and Overflow), Clean 9. Tanks (MP Fuel Service), Inspect 10. Tanks (MP Fuel Stowage and Overflow), Inspect 11. Tanks (Potable Water), Clean and Inspect 12. Tanks (Dirty Oil and Waste), Clean and Inspect 13. Propulsion System, Alignment Check 14. Propulsion Shafting, Remove, Inspect, and Reinstall 15. Mechanical Shaft Seal Assemblies, Overhaul 16. Propulsion Shaft Bearings (External), Check Clearances 17. Propulsion Shaft Bearings (External), Renew 18. Propellers, Remove, Inspect, and Reinstall 19. Propeller, Repair Root Erosion 20. Exhaust System, MDE, Inspect 21. SW Heat Exchangers, Clean, Inspect and Hydro 22. Fathometer Transducer, Renew 23. Speed Doppler, Renew, Doppler Valve, Overhaul 24. Sea Valves and Waster Pieces, Overhaul or Renew 25. Sea Strainers - Duplex (All Sizes), Overhaul 26. Firemain Valves, Renew 27. Bilge and Ballast Valves, Overhaul or Renew 28. Rudder Assemblies, Remove, Inspect and Reinstall 29. Fin Stabilizers (General), Overhaul 30. Grey Water Holding Tanks, Clean and Inspect 31. Sewage Holding Tanks, Clean and Inspect 32. Grey Water Piping, Clean and Flush 33. Sewage Piping, Clean and Flush 34. Battery Space, Preserve and Insulate 35. Aft Steering Compartment, Preserve and Insulate 36. Forward Void, Preserve 37. Tanks (Dirty Oil and Waste), Preserve "100%" 38. Tanks (Grey Water Holding), Preserve "100%" 39. Tanks (Potable Water), Preserve "100%" 40. Tanks (Sewage Holding), Preserve "100%" 41. Bilge Surfaces, Preserve 42. Decks - Exterior, Preserve ("Non-Skid Broadcast Grit" System) 43. U/W Body, Preserve ("100%") 44. Stern Tube Interior Surfaces, Preserve 100% 45. Cathodic Protection System (Bilge and Sea Chest), Renew 46. Cathodic Protection System, Inspect and Maintain 47. Impressed Current Cathodic Protection System Dielectric Shield, Renew 48. Drydocking 49. Temporary Services, Provide 50. Sea Trial Performance, Provide Support 51. Hull Plating and Structural Members, Inspect and Repair 52. Deck Plating, Renew (Aluminum) 53. Canopy Mounts, AMIO, Fabricate and Install 54. CCTV Security System, Install 55. Main Reduction Gear Assembly, Remove, Reinstall and Realign 56. Through.eck Packing Gland, Insulation and Carpeting, Renew 57. Deck Covering (Interior Wet/Dry), Renew 58. Deck Covering (Wet/Dry), Seal All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. In accordance with FAR 19.1305, if your firm is HUBZone certified or FAR 19.1404 if you firm is SDVOSB or FAR 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Susan.A.Kreider@uscg.mil or by fax (757) 628-4676. Questions may be referred to Susan Kreider at (757) 628-4644. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers, at least two (2) references are requested, but more are desirable. Your response is required by January 26, 2011. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/CUSHING12JAN11/listing.html)
- Record
- SN02359265-W 20110114/110112234557-6775ad73845556a27310007f4e928bf9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |