SOLICITATION NOTICE
49 -- INFLATOR GAGE - PNEUMATIC TIRE
- Notice Date
- 1/19/2011
- Notice Type
- Presolicitation
- NAICS
- 336322
— Other Motor Vehicle Electrical and Electronic Equipment Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L311R0078
- Archive Date
- 3/22/2011
- Point of Contact
- Charles E. Lee, Phone: 6146929373, Richard J Matz, Phone: 614-692-8148
- E-Mail Address
-
charles.e.lee@dla.mil, richard.matz@dla.mil
(charles.e.lee@dla.mil, richard.matz@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- NSN 4910-01-0382820 - INFLATOR GAGE - PNEUMATIC TIRE being bought in accordance with Army (19207) drawing 11677140 and all related data. The total quantity required is 4084 each with 972 each to be shipped to (W62G2T) Stockton, CA 95296-0130 and 3112 each to be shipped to (W25G1U) New Cumberland, PA 17070-5000. This solicitation is an RFP and will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of 2/4/11 ; hard copies of this solicitation are not available. Technical drawings/bid sets are available after the same issue date on the Internet at http://www.dibbs.bsm.dla.mil/ then click the cFolders under the Technical Data tab. Requests should include the RFP number, opening/closing date, NSN, purchase Request Number, buyer's name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. This solicitation is 100% set-aside for small business concerns. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance. The required delivery is 135 days. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST-Quick Search and, in most cases download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shipping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257).Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item with 15 days of this notice. Users not having access to the Internet may contact the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP. ITEM DESCRIPTION FOR PR: 0040243981 INFLATOR-GAGE,PNEUMATIC TIRE THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES EXCEPTIONS TO DWG NR. 11677140: GAGE IS TO BE I/A/W COMMERCIAL ITEM DESCRIPTION A-A 59568 PART NUMBER AA59568-3C4A. EXCEPTION TO DWG NR. 11677767: THE TOLERANCE ON DIMENSION "A" IS CHANGED FROM PLUS OR MINUS (+ OR -) 1.00 INCH FOR 30-FOOT LENGTH HOSE TO READ PLUS OR MINUS (+ OR -) 1 PERCENT. AS AN ALTERNATE, AMERICAN COUPLING CO. P/N 173-0804BP MAY BE USED FOR BUSHING DESIGNATED AS M51-101 ON DWG NR. 11677140. THE CONTRACTOR WILL OVERPACK ONE EACH MANUFACTURER'S COMMERCIAL MANUAL CONSISTING OF OPERATION, SERVICES, MAINTENANCE, REPAIR INSTRUCTIONS, AND A COMPLETE PARTS LIST WITH EACH END ITEM. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. FULL AND OPEN COMPETITION APPLY DETAILED DRAWING (ONE ITEM) THE SPECIFICATION OR STANDARD CITED IS TO BE USED IN LIEU OF THE DOCUMENT IDENTIFIED WITHIN THE PARENTHESES. "STANDARD" CRITICAL APPLICATION ITEM I/A/W DRAWING NR 19207 11677140 BASIC AMEND NR B DTD 03/13/95 TYPE NUMBER 11677140-5 I/A/W DRAWING NR 19207 11677140-5 REFNO AMEND NR DTD 10/06/10 TYPE NUMBER I/A/W DRAWING NR 19207 11677767 REFNO AMEND NR TYPE NUMBER 11677767-5 I/A/W DRAWING NR 19207 57K0224 REFNO AMEND NR TYPE NUMBER I/A/W DRAWING NR 19207 7974576 REFNO AMEND NR G TYPE NUMBER I/A/W DRAWING NR 19207 8735758 REFNO AMEND NR A TYPE NUMBER I/A/W DRAWING NR 19207 8735759 REFNO AMEND NR TYPE NUMBER I/A/W DRAWING NR 19207 8741502 REFNO AMEND NR A TYPE NUMBER I/A/W DRAWING NR 19207 8741552 REFNO AMEND NR A TYPE NUMBER I/A/W DRAWING NR 19207 8741553 REFNO AMEND NR A TYPE NUMBER I/A/W DRAWING NR 24617 M-51.101 REFNO AMEND NR TYPE NUMBER I/A/W A-A-59568 REFNO AMEND NR TYPE NUMBER AA59568-3C4A
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L311R0078/listing.html)
- Place of Performance
- Address: DLA LAND and MARITIME, 3990 E. BROAD ST., COLUMBUS, Ohio, 43218, United States
- Zip Code: 43218
- Zip Code: 43218
- Record
- SN02362914-W 20110121/110119234516-86e46d5601d2ad7f4c65636609855882 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |