MODIFICATION
U -- International Multi-Aircraft Flight Training - MAP of Randolph
- Notice Date
- 1/20/2011
- Notice Type
- Modification/Amendment
- NAICS
- 611512
— Flight Training
- Contracting Office
- Department of the Air Force, Air Education and Training Command, Specialized Contracting Squadron, 2021 First Street West, Randolph AFB, Texas, 78150-4302
- ZIP Code
- 78150-4302
- Solicitation Number
- FA3002-11-R-0001
- Archive Date
- 2/17/2011
- Point of Contact
- Gwen K Mayhue, Phone: 210-652-3816, Robert J. Walz, Phone: 210-652-1358
- E-Mail Address
-
gwen.mayhue@randolph.af.mil, robert.walz@randolph.af.mil
(gwen.mayhue@randolph.af.mil, robert.walz@randolph.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Map of Randolph Air Force Base The Air and Education Training Command and Air Force Security Assistance Training Command will host an Industry Day on 10 February 2011, at 8:00 am through 11:00 am (CST) to provide interested parties with additional information and solicit feedback on the Foreign Military Sales International Multi Aircraft Flight Training Program. Industry day will be held at Building 693, 555 F Street West, Randolph Air Force Base, 78150, basement conference room. Individual Breakout Sessions will be by appointment only. Each appointment will be scheduled as a first come first serve in increments of 15 minutes. When registering please provide statement of interest to schedule individual session. The government will e-mail back session time. Interested attendees may pre-register by e-mail to Gwen Mayhue at gwen.mayhue@us.af.mil. To assist us in obtaining guest access onto Randolph AFB, please provide the following information for all attendees: Last Name, First Name and Middle Initial, Date of Birth, Address, Driver's License # and State of issue, and Vehicle information (if applicable) - Make, Model, and License Plate. Seating is limited, therefore we request no more than 3 members per company or partnering arrangement. The Government intends to publish a list of attendees to encourage subcontracting opportunities. For this purpose, please provide the name, phone number, and email address of your company. Registrations will be accepted until 4:00 pm (CST) on 02 February 2011. A question form is attached for questions, comments, and concerns regarding the attached draft Performance Work Statement (PWS). A map to Building 693 and 853 is attached. The Industry Day is for planning/information purposes only and proposals will not be accepted at that time. Please contact Gwen Mayhue at gwen.mayhue@us.af.mil with any questions. The Air Education and Training Command Contracting Squadron (AETC CONS) is seeking information concerning the availability of capable contractors to provide non-personal services Multiple Aircraft Simulator Training requirements to Foreign Military Sales (FMS) students. Place of performance is to be recommended by the offeror(s). This Request for Information (RFI) is issued for informational and planning purposes only. The information will be used in conducting market research to identify potential sources and commercial practices in support of the Government's requirements. The information will be used in conducting market research to locate qualified, experienced and interested potential sources. Contact with Government personnel, other than those specified in this RFI, by potential offerors or their employees' regarding this requirement is not permitted. This is not a Request for Proposal (RFP). It is not to be construed as a formal solicitation or an obligation on the part of the Government to acquire any products or services. The information requested by this RFI will be used within the Air Force to facilitate decision making and will not be disclosed outside the agency. Any information provided to the Government is strictly voluntary and will be provided at no cost to the Government. Should a future requirement evolve from this preliminary planning process, it is anticipated the period of performance will be a base of one year plus four (4), one (1)-year option periods. It is also anticipated the type of contract will be a Firm Fixed Price IDIQ contract. For purposes of this RFI, the North American Industry Classification System (NAICS) Code is 611512, Flight Training and the small business size standard is $25.5 Million. Description of Services Requirement. (Note: The description herein is a summary of anticipated services and is not intended to be all-inclusive.) Training is required for Multiple Aircraft Pilot Initial and Recurrent and Flight Engineer Training for the following aircrafts: Gulfstream III, Gulfstream IV, Gulfstream V, Gulfstream 550, C-20, C-12, JetStar, Lear Jet 35A, King Air-200, King Air 300, King Air 350, C-26, ERJ-145, WestWind II, T-6, Falcon 20, Bell 206 Helicopter, S-92 Helicopter, S-70 Helicopter, Boeing 707 (simulator only), Boeing 737 (simulator only), Cessna 500, Cessna 205 and MI-17 Helicopter and Flight Engineer. Proposed training will be Contractor, Type I Special Training, procured by the Air Education and Training Command and presented under the auspices of the Security Assistance Training Program. All instruction and technical information shall be in the English language. Contractor shall provide training at the contractor's CONUS location in accordance with (IAW) objectives to provide necessary skills to aircrew personnel to support their flying mission. Training shall be based on standard off-the-shelf commercial configured King Air 200, King Air 350, WestWind II, C-26, G-III, G-IV, G-V, and G-550 aircraft; training for the C-12D will be based upon U.S. Army C-12D aircraft/equipment. Training for the MI-17 Helicopter shall be CONUS based unless specified by individual task orders. Training shall be to the level necessary to allow students a thorough understanding of their specialty so that at the end of their training they can perform all tasks IAW applicable technical data with minimal supervision. Courses shall be identified and presented separately as academics and structured on-the-job training (SOJT). Academic training may consist of lecture, discussion, and/or demonstration. SOJT may consist of laboratory, hands-on, and /or demonstration. Contractor shall provide training derived from approved course documents reflecting the training course content and duration. Course length instruction hours are based on the actual student interface hours with the instructor in the learning environment. Training shall include combinations of formal classroom instruction and necessary performance (hands-on) exercises to provide proficiency. The primary emphasis shall be "hands-on" practical experience allowing students to complete all trained tasks unsupervised and using approved technical data. Student Support Services The Contractor shall provide or arrange suitable housing for the students during CONUS training. Housing shall include two days prior to class start and one day after class ends. Officers shall be quartered separately in single rooms. Two enlisted men usually share one room. Cooking facilities are desirable. Housing shall not be provided for accompanying dependents unless specifically authorized, in writing, by the contracting officer. The Contractor shall also provide transportation to and from the airport and daily transportation between the training facility and the student's quarters. If other transportation is required by the contractor to conduct training (i.e. requirement to attend training in restricted areas where POVs (Privately Owned Vehicles) are not permitted, it shall be the responsibility of the contractor. NOTE: Students are not allowed the use of rental vehicles obtained under, or as part of, this contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AETC/SCS/FA3002-11-R-0001/listing.html)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN02363235-W 20110122/110120234238-795b3aa2a5208a9dc458a0ac30eb168a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |