MODIFICATION
56 -- LONG BUTTE FENCE MATERIALS
- Notice Date
- 1/20/2011
- Notice Type
- Modification/Amendment
- NAICS
- 423390
— Other Construction Material Merchant Wholesalers
- Contracting Office
- BLM ID-STATE OFC HR&ADM SVC (ID953)1387 S. VINNELL WAYBOISEID83709US
- ZIP Code
- 00000
- Solicitation Number
- L11PS00082
- Response Due
- 1/27/2011
- Archive Date
- 2/26/2011
- Point of Contact
- Linda J Pitzer
- Small Business Set-Aside
- Total Small Business
- Description
- Solicitation No. L11PS00082 is hereby modified to provide clarification in the specifications for Line Item No. 00001- Snow Fence. The closing date has been extended to 4:15pm (MST), Thursday, January 27, 2011. To be responsive, you must submit a new quote based on this Amendment regardless if you have previously submitted a response. The line item numbers are:Line Item 00001 - Mesh Snow Fence, 100' Rolls (Orange), Quantity 2,112 Rolls. Line Item 00002 - Steel T-Posts, 5"6' length, Quantity 21,000 Each.SPECIFICATIONS: Line Item 00001 - Polyethylene Plastic Mesh Snow Fence MATERIALS - The following physical properties shall be met. MESH SIZE - 1.75" X 1.50"MATERIAL - POLYPROPYLENECOLOR- ORANGEULTRA VIOLET RESISTANCE - FULLY STABILIZEDMANUFACTURED LENGTH - 100'ROLL WIDTH - 48"ROLL WEIGHT - 20 LBS. (MINIMUM)TENSILE STRENGTH YLD, MD/TD (ASTM-D882) - 2813 PSI - MD - 5127 PSI -TDTENSILE STRENGTH, LOAD BRK, MD/TD (ASTM-D882) - 2813 PSI - MD - 4083 PSI -TDELONGATION LOAD BRK, MD/TD (ASTM-D882) - 4% MD - 77% TD FABRICATION The geogrid shall be a regular grid structure formed by uniaxially drawing a continuous sheet of select high density polyethylene material and shall have aperture geometry and rib and junction cross-section sufficient for optimum soil trapping efficiency. The geogrid shall have high continuity of tensile strength through all ribs and junctions of the grid structure. Thegeogrid shall also be resistant to ultraviolet degradation deterioration. TESTS The supplier shall furnish the manufacturer's certification that the resin used in the manufacture of polyethylene plastic mesh snow fence meets the physical tests set forth in paragraph Materials above. The Department at its option may perform any of the tests necessary to establish conformance with this specification. When required by the engineer, a 36-inch long, full height sample shall be furnished for each 2,500 feet of fence or fraction thereof for eachmanufacturing lot. Additional samples may be required at the Department's option. SHIPPING Polyethylene plastic mesh snow fence shall be shipped in 100-foot rolls. Line Item 00002 - Steel Fence T-Posts ASTM A 702; painted solid green or green with white tops, "T" bar type, with a welded or riveted anchor plate. Steel posts shall be manufactured from wrought, rail, or new billet steel, and shall have a minimum weight of 1.33 lb/lin ft. The anchor plates shall weigh a minimum of 0.67 pounds +5 percent, and be a minimum of 18 inch2 in area. MORE THAN ONE CONTRACT AWARD MAY BE MADE UNDER THIS SOLICITATION. Estimated Delivery Date: On or before March 25, 2011 Packaging Requirements: Standard commercial practice. The delivery address is Bureau of Land Management, Shoshone Field Office, 400 West F Street, Shoshone, Idaho 83352. THE FOB POINT SHALL BE DESTINATION. "FOB Destination" means that all costs for transportation or freight from the shipping point shall be paid by the Contractor and included in the unit price quoted for each item.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/BLM/ID/L11PS00082/listing.html)
- Record
- SN02363373-W 20110122/110120234346-38d1bef78967ebdf52f028bc0c2fc449 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |