SOURCES SOUGHT
40 -- Stainless Steel Wire Rope Sources Sought
- Notice Date
- 1/26/2011
- Notice Type
- Sources Sought
- NAICS
- 332618
— Other Fabricated Wire Product Manufacturing
- Contracting Office
- USACE District, Kansas City, ATTN: CENWK-CT, 700 Federal Building 60l East 12th Street, Kansas City, MO 64106-2896
- ZIP Code
- 64106-2896
- Solicitation Number
- W912DQ-11-R-1003
- Response Due
- 2/7/2011
- Archive Date
- 4/8/2011
- Point of Contact
- Hilary O Meckel, 816 389 3500
- E-Mail Address
-
USACE District, Kansas City
(hilary.o.meckel@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- THIS IS A SOURCES SOUGHT SYNOPSIS ANNOUNCEMENT This is a Sources Sought Synopsis announcement; market survey for information only, to be used for preliminary planning purposes. No proposals are being requested or accepted with this synopsis. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. THIS IS A SOURCES SOUGHT AND/OR REQUEST FOR INFORMATION (RFI). This Sources Sought/RFI is for information and planning purposes only as defined by FAR 15.201. The purpose of the posting is to ascertain the breadth of interest and capability of the marketplace to fulfill a specific need. This Sources Sought/RFI does not constitute a Request for Quote (RFQ), Request for Proposals (RFP), or an Invitation for Bid (IFB), or a promise that any of the aforementioned will be issued in the future. This request does not commit the Government to contract for any services or supplies. The U.S. Army Corps of Engineers (USACE) is not seeking quotes, proposals, or bids at this time; nor will USACE accept any of the aforementioned at this time. Responders are advised that the Government will not pay for any information or administrative costs incurred as a result of responding to this Sources Sought/RFI. The Kansas City District, U. S. Army Corps of Engineers is looking for manufacturers of flat, woven, wire rope for use on tainter gates at a lake facility. The technical requirements for the new rope are as follows: The wire rope shall be the standard product of a manufacturer regularly engaged in the manufacture of wire rope and shall essentially duplicate products having been in satisfactory use for at least three years prior to bid opening. Trade designation for the rope is " (thickness) X 3 " (width). New flat rope will finish at approximate thickness of 3/4" and 4" wide (maximum dimensions, including seizing wire used to sew rope, these dimensions are for the "relaxed" or unloaded condition of the wire rope). The final dimensions for the rope in the "loaded or under tension" condition shall be approximately 11/16" thick and approximately 3 " in width. The existing rope drums are 4.0" wide and replacement rope shall wrap onto drums without rubbing of the rope on the inside flanges of the drums when the rope is in a "loaded condition". Wire construction shall be 4 X 19, material type shall be 302 stainless steel (or approved equal). Flat rope shall consist of eight (8) pieces, 4 right lay and 4 left lay. Length of rope from socket to socket (exposed rope, length does not include rope inside the sockets) shall be 46 feet, 6 inches (46'- 6") +/- 1/8" (Thirty six wire rope assemblies are required for 18 tainter gates). Flat rope shall be sewn together with 1/8" diameter, 1 X 7 stainless steel seizing wire. Assembled flat rope shall weigh approximately 2.82 pounds per foot. Minimum breaking strength for rope shall be 83.6 (+/- 2) tons. The manufacturer would be required to submit for government approval, mill certification for all wire component (4 X 19, 302 rope and seizing wire) materials. The completed wire rope assemblies (both sockets attached) would have to be capable of meeting the following tests: load tested by the rope manufacturer to a load of 40% of breaking strength (33.4 tons, +2 tons, -0 tons). The government may entertain variations to the above technical requirements if the manufacturer can prove that the proposed changes would result in a final product capable of performing the necessary functions. APPLICABLE NAICS CODES: 332618 423510
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA41/W912DQ-11-R-1003/listing.html)
- Place of Performance
- Address: USACE District, Kansas City ATTN: CENWK-CT, 647 Federal Building 60l East 12th Street Kansas City MO
- Zip Code: 64106-2896
- Zip Code: 64106-2896
- Record
- SN02366821-W 20110128/110126233937-92e8d4df96e9f2fcc8dd5ca58feb25fd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |