PRESOL | 81 | Collapsible and Resuable Plywood Crates

FBO DAILY ISSUE OF FEBRUARY 16, 2011 FBO #3371
SOLICITATION NOTICE

81 -- Collapsible and Resuable Plywood Crates

Notice Date: 2/14/2011
Notice Type: Combined Synopsis/Solicitation
NAICS: 321920 — Wood Container and Pallet Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Distribution, J Avenue, DDC J7-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
ZIP Code: 17070-5001
Solicitation Number: SP330011-Q-0068
Point of Contact: Hilbert Caesar, Phone: 717-770-5516
E-Mail Address: hilbert.caesar@dla.mil
(hilbert.caesar@dla.mil)
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP3300-11-Q-0068. This solicitation is issued as a small business set-aside. The associated NAICS code is 321920 with a small business size standard of 500 employees. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-38 effective 01 February 2010 and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20100224 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2009-57 & (44). The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. This is a BRAND NAME or EQUAL acquisition; in accordance with FAR 52.211-16, a list of the salient physical, functional, or performance characteristics that "equal" products must meet are listed below. This procurement is for the purchase of one hundred (100) each - collapsible and reusable plywood crates. Delivery to Texarkana, TX 75507 CLIN 0001 - QTY 100 EACH - Manufacturer Quick-Crate - BRAND NAME OR EQUAL - Reusable Quick-Crate with inside dimensions 78.5"(L) x 48.5"(W) x 42"(H), outside dimensions 80"L x 50" W x 48" H. The crates shall be able to support a maximum load of 3.000 pounds. Below is list of the required salient characteristics that the reusable collapsible crate shall meet. QTY 100 X tiny_mce_marker________________EACH = tiny_mce_marker_________________TOTAL COLLAPSIBLE AND REUSABLE PLYWOOD CRATE SALIENT CHARACTERISTICS: • Outside dimensions - 80" (L) x 50" (W) x 48" (H) • Inside dimensions - 78.5"(L) x 48.5"(W) x 42"(H) • Non-cleated • ¾" CDX exterior grade plywood • Milled slots for attachment of spring steel clips • Clips: 105 x 92 x 50mm, spring steel, shall be finish coated in a manner to prevent rusting, SAE 1055/60, hardness 48-52 hrc, finish E-coat black 1.6 mil thick, salt spray test min. 250 hours • Appropriate panels shall interlock by using a rabbitted perimeter and radiused edges • Top and bottom shall rabbitted on all 4 edges • Sides of the end pieces shall be rabbitted • Front and back pieces shall not be rabbitted • Minimum clip width of 2" • Base of crate built on 4 way runners (parallel with the width of crate) to allow for easy transport by fork truck • Able to support the weight of as many as four (4) crates of equal size and weight while in storage • Maximum load 3,000 pounds Offerors shall provide the unit price for each component and the total amount, inclusive of shipping costs (FOB Destination). Supplies shall be shipped to Texarkana, TX. NOTE: A SAMPLE CRATE SHALL BE REQUIRED TO BE DELIVERED TO TEXARKANA, TX WITHIN 21 DAYS AFTER RECEIPT OF THE ORDER. THE GOVERNMENT WILL COMPLETE THE INSPECTION OF THE SAMPLE WITHIN THREE (3) DAYS AFTER RECEIPT. IF IT IS DETERMINED THE PRODUCT MEETS THE GOVERNMENT'S REQUIREMENT THE REMAINING 99 CRATES SHALL BE FORWARDED. IF THE PRODUCT DOES NOT MEET THE GOVERNMENT'S MINIMUM REQUIREMENT, THE CONTRACT MAY BE TERMINATED AND REAWARDED. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. The method of payment for supplies under this order is by the Acquisition Operations Office via the Government Purchase Card (VISA). The following FAR, DFARS, and DLAD clauses and provisions apply to this acquisition. The full text version of these clauses and provisions may be viewed at http://farsite.hill.af.mil/. FAR 52.212-1 Instructions to Offers-Commercial Items - Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (e) multiple offers and (h) multiple awards. NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. FAR 52.211-6 -- Brand Name or Equal (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- Meet the salient physical, functional, or performance characteristic specified in this solicitation; Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity's Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an "Agency Level Protest under Executive Order No. 12979." (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer's decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) OFFER SUBMISSION INSTRUCTIONS-Quotes must include the following items. Submission of a quote that does not contain all of the below requested items may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number (2) Solicitation number (3) Unit Price and extended prices for all CLINS (4) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code (5) Signed acknowledgements of amendments (applicable only if any amendments are ssued against this solicitation) (6) Descriptive literature for submissions of "equal" products to demonstrate the item meets the minimum salient characteristics found in this notice. Descriptive Literature: a. "Descriptive Literature" means information (e.g., cuts, illustrations, drawings, brochures) that is submitted as a part of a proposal. Descriptive Literature is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as (1) design; (2) materials; (3) components; (4) performance characteristics; and (5) methods of manufacture, assembly, construction or operation. The term includes only information required to determine the technical acceptability of the offered product. It does not include other information such as that used in determining the responsibility of a prospective contractor or for operating or maintaining equipment. b. Descriptive Literature, required elsewhere in this solicitation, must be (1) identified to show the item(s) of the offer to which it applies and (2) received by the time specified in this solicitation for receipt of offers. c. The failure of descriptive literature to show that the product offered conforms to the requirements of this solicitation may result in rejection of the offer. 2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award. FAR 13-106-2 Evaluations of Quotations or Offers - The Government intends to evaluate quotes in response to this quotation and will award one firm-fixed price contract to the responsible offeror whose quote represents the total overall lowest price technically acceptable offer. FAR 52.212-4 Contract Terms and Conditions-Commercial Items (JUN 2010), Addenda to 52.212-4; the following clauses apply: FAR 52.247-34 FOB Destination (NOV 1991) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders-Commercial Items (DEC 2009) in paragraph (b) the following clauses apply: FAR 52.222-3 Convict Labor (JUN 2003) FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (JUL 2010) FAR 52.222-21 Prohibition of segregated facilities (FEB 1999) FAR 52.222-26 Equal Opportunity (MAR 2007) FAR 52.222-36 Affirmative Action for Workers with Disabilities (JUN 1998) FAR 52.222-37 Employment Reports on Disabled Veterans and Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) FAR 52.225-13 Restriction on Certain Foreign Purchases (JUN 2008) FAR 52.232-36 Payment by Third Party (FEB 2010) FAR 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (NOV 2009) The following additional clauses/provisions apply: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (JAN 2009) DFARS 252.225-7036 Buy American Act-Free Trade Agreement-Balance of Payments Program ALT I (JUL 2009) DFARS 252.243-7002 Request for Equitable Adjustment (MAR 1998) DFARS 252.247-7023 Transportation of Supplies by Sea (MAY 2002) DFARS 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) DLAD 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) All questions and inquiries should be addressed via email to Hilbert.Caesar@dla.mil NLT 3:00 PM EST ON 2 March 2011. Request for Quote Number SP3300-11-Q-0068. Pricing, item descriptive literature (for "equal" submissions) and representations/certifications are due NLT 3:00 PM EST ON 15 MARCH, 2011. This information should be submitted to above email address or faxed to 717-770-7591. Contractors must be capable of accepting payment by government credit card for this procurement. ALL SOURCES MUST BE REGISTERED IN THE CENTRAL CONTRACT REGISTRATION DATABASE, http://www.ccr.gov/, or an award cannot be processed.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP330011-Q-0068/listing.html)
Place of Performance: Address: Shipping Address:, DLA Distribution Red River Texas, Bldg 499E, Line 7/8, Texarkana, Texas, 75507-5000, United States; Zip Code: 75507-5000
Record: SN02379371-W 20110216/110214234302-ae4d50eb60f6ee1515bb07b375d9bfe2 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

81 -- Collapsible and Resuable Plywood Crates