SOLICITATION NOTICE
66 -- Nanopositioning Stage
- Notice Date
- 2/18/2011
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640
- ZIP Code
- 20899-1640
- Solicitation Number
- NB620030-11-01571
- Archive Date
- 3/19/2011
- Point of Contact
- CHRISTOPHER JOHN GANEY, Phone: 3019756205, Todd D Hill, Phone: 301-975-8802
- E-Mail Address
-
christopher.ganey@nist.gov, todd.hill@nist.gov
(christopher.ganey@nist.gov, todd.hill@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- CLASSIFICATION CODE: 66- Laboratory Equipment and Supplies TITLE: Nanopositioning Stage SOLICITATION NUMBER: NB620030-11-01571 RESPONSE DATE: March 4, 2011 CONTACT POINTS: Chris Ganey, Contract Specialist, (301) 975-6205 Todd Hill, Contracting Officer, (301) 975-8802 DESCRIPTION: The National Institute of Standards and Technology (NIST) has a requirement for a Nanopositioning Stage to be used in the Center for Nanoscale Science and Technology at NIST, Gaithersburg, MD. THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-48. 1352.215-72 INQUIRIES (APR 2010) Offerors must submit all questions concerning this solicitation in writing to Chris Ganey. Questions should be received no later than 7 calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. (End of Provision) The associated North American Industrial Classification System (NAICS) code for this procurement is 334516, with a small business size standard of 500 employees. This acquisition is 100% set-aside for small business. In accordance with the non-manufacturer rule, the contractor shall be a small business under the applicable size standard and shall provide either its own product or that of another domestic small business manufacturing or processing concern. See FAR 19.102(f) for additional information. All offerors shall provide a quotation for the following line items: Line Item 0001: One (1) Nanopositioning Stage STATEMENT OF WORK: Introduction The contractor shall furnish the necessary personnel, material, equipment, and services to fabricate a Nanopositioning Stage Background Background statement of use: This device will be used for static and dynamic positioning of a sample in the three-dimensional field of view of an inverted optical microscope. Minimum Requirements The system shall meet or exceed the technical specifications identified below. All items must be new. Used or remanufactured equipment will not be considered for award. The minimum specifications for a Nanopositioning Stage are listed below. 1. Three-axis piezoelectric nanopositioning stage with at least 75 micrometer travel along the X and Y directions and 50 micrometers along Z. 2. Center aperture with minimum dimension of at least 1.5". Overall height of the low-profile nanopositioner stage shall not exceed one inch. 3. Position sensors with a resolution of at most 0.5 nm for each of the three axes. 4. 10% to 90% step response time along each axis must be less than 3 ms. 5. Stand-alone controller unit (high voltage driver) with the following capabilities for each axis: a) Analog position control input (-10 V to +10 V) b) Analog position sensor output c) Manual switch for selecting closed-loop or open-loop mode. d) The high voltage output range in open-loop mode must equal or exceed the output voltage range in closed-loop mode, so that there is no loss of overall nanopositioning travel range in open-loop mode. e) The unit should be rack mountable in a standard 19" electronics rack. f) 16-bit USB interface and software compatible with Windows XP Professional. 6. Integrated sample holder for 3" microscope slide 7. Two-axis, manual, micrometer-driven stage for mounting the nanopositioner to a Zeiss Axio Observer microscope. The manual stage must provide at least 25 mm of travel in X and Y directions, with 1 micrometer-resolution vernier scale. Express Warranty The contractor shall warrant the entire system for a period of at least one year. The warranty must include unlimited telephone/e-mail support for questions regarding operation. All costs including parts, labor, travel, and other expenses necessary to repair the system will be borne solely by the contractor at no additional cost to the U.S. Government. Delivery Delivery should be FOB DESTINATION and shall take place not later than 45 days after contract award. PROVISIONS AND CLAUSES: The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html. Those marked with an asterisk are provided in full text in Attachment 1. Provisions *52.212-1, Instructions to Offerors-Commercial Items *52.212-3 Offeror Representations and Certifications-Commercial Items Offerors shall complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. Clauses *52.212-4 Contract Terms and Conditions-Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (MAY 2009) 52.219-28, Post award Small Business Program Representation 52.222-3, Convict Labor; 52.222-19 Child Labor - Cooperation With Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52-222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.223-18, Contractor Policy to Ban Text Messaging While Driving 52.225-3, Buy American Act - NAFTA Alternate II. 52.225-13 Restriction on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration. NIST Local Clause_04 Billing Instructions INSTRUCTIONS: Central Contractor Registration In accordance with FAR 52.204-7, the awardee must be registered in the Central Contractor Registration (www.ccr.gov) prior to award. Refusal to register shall forfeit award. Due Date for Quotations Offerors shall submit their quotations so that NIST receives them not later than 12:00 p.m. Eastern Time on March 4, 2011. FAX quotations shall not be accepted. E-mail quotations shall be accepted at christopher.ganey@nist.gov. Quotations shall be sent to the National Institute of Standards and Technology, Acquisition Management Division, Attn: Chris Ganey, 100 Bureau Drive, Stop 1640, Gaithersburg, MD 20899-1640. All offerors should ensure the RFQ number is visible on the outermost packaging. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be provided to Chris Ganey, Contract Specialist on 301-975-6205. Addendum to FAR 52.212-1, Quotation Preparation Instructions 1) Price Quotation: The offeror shall submit an original and four copies of the completed price schedule. If the quotation is submitted electronically, additional copies are not required. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm-fixed-price, preferably FOB Destination, for each CLIN. Price quotations shall remain valid for a period of 90 days from the date quotations are due. 2) Technical Quotation: The offeror shall submit an original and four copies of the technical quotation. If the quotation is submitted electronically, additional copies are not required. The technical quotation shall address the following: Technical Capability: The offeror shall submit a technical description or product literature for the equipment it is proposing, which clearly identifies the manufacturer, make and model. The offeror must demonstrate that its proposed equipment meets or exceeds each minimum requirement described in the statement of work by providing a citation to the relevant section of its technical description or product literature. If applicable, evidence that the Offeror is authorized by the original equipment manufacturer to provide the item(s) in the quotation should be included. The Offerors shall acknowledge that NIST will not store the equipment onsite before it is installed. Offeror must provide data showing the phase and amplitude response (Bode plot) and step response of each axis for this device, or a similar device for specification four. Acceptance of Terms and Conditions: This is an open-market solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this solicitation that will include the clauses set forth herein. The quotation should include one of the following statements: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. QUOTATION EVALUATION: Evaluation Factors Basis for Award shall be technically acceptable/ lowest price.. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability and 2) Price. 1. Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. Technical capability must meet or exceed the Government's performance specifications. Offeror must provide data showing the phase and amplitude response (Bode plot) and step response of each axis for this device, or a similar device for specification four. Data provided will be used to evaluate specification four. 2. Price will be evaluated for reasonableness. 3. Price shall not be evaluated on quotes that are determined technically unacceptable under the Technical Capability Evaluation factor. 1352.233-70 AGENCY PROTESTS (APR 2010) (a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999) (b) Agency protests filed with the Contracting Officer shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: PATRICK STAINES, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: HEAD OF THE CONTRACTING OFFICE (HCO) 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010) (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 (End of clause)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/NB620030-11-01571/listing.html)
- Record
- SN02383878-W 20110220/110218234352-84b688f9370353ce9f39003fd270ae6e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |