SOURCES SOUGHT
99 -- VERY SMALL BUSINESS SET-ASIDE: For the Demolition and Replacement of Designated Roof Areas at the Air Route Traffic Control Center (ARTCC), 512 Division Street, Farmington, Minnesota
- Notice Date
- 2/24/2011
- Notice Type
- Sources Sought
- Contracting Office
- FEDERAL AVIATION ADMINISTRATION, AGL-52 AGL - Great Lakes
- ZIP Code
- 00000
- Solicitation Number
- DTFACN-11-R-00125
- Response Due
- 3/10/2011
- Archive Date
- 3/25/2011
- Point of Contact
- Melody McGovern, 847-294-7347
- E-Mail Address
-
melody.mcgovern@faa.gov
(melody.mcgovern@faa.gov)
- Small Business Set-Aside
- N/A
- Description
- The Federal Aviation Administration (FAA) Great Lakes Region has a requirement for the Demolition and Replacement of Designated Roof Areas at the Air Route Traffic Control Center (ARTCC), 512 Division Street, Farmington, Minnesota. Replacement rood shall be Thermoplastic Polyolefin (TPO). The following is a list of the Designated Roof Area's: 1. Administration West Wing (ACM)2. M1 Roof3. Loading Dock Roof4. Caf' Roof The project contains, but is not limited to, the following work items: 1. Verify all existing conditions. Where structure does not provide required 1/4" per foot positive drainage, plan tapered insulation to provide adequate slope to existing roof drains. 2. Remove all existing roofing materials down to the existing roof deck. 3. Design and install a complete mechanically fastened roofing system utilizing an 80 mil TPO membrane with an R-30 insulation factor. The roofing system will include, but is not limited to, membrane, insulation, deck protection boards, walkways, flashing, parapet nailer boards, treated wood roof cants, treated wood nailer boards, treated wood parapet boards, and caulking. Provide flashing, parapet edges and all other Work dimensionally similar to existing. All Work shall be fastened, as per the manufacturer's recommendations, to meet an FM I-90 uplift standard. 4. Grounding on the roofs are to be set aside, then reinstalled after roofing is complete. This system largely rests on the roof and needs no flashing or membrane cutting. Where applicable, comply with NEC 2005 and FAA standards 1217f (electrical) and 19e (grounding). 5. Electrical conduit on the roofs is to be set aside, and then reinstalled after roofing is complete. This system largely rests on the roof and needs no flashing or membrane cutting. Where applicable, comply with NEC 2005 and FAA standards 1217f (electrical) and 19e (grounding). 6.Replace all roof drains with new, similar to existing galvanized ductile iron roof drains, siphon / solar powered type, Zurn or Watts or similar, Contractor shall verify size of existing drains and match size. Provide underdeck clamps. Submit proposed new roof drain cut-sheets with bids. TPO CERTIFICATION: Provide certificate that your company is an approved installer of the required roof system. MANUFACTURE QUALIFICATIONS: A qualified manufacture that is UL listed and FM Approvals for membrane roofing system identical to that used for this Project. INSTALLER QUALIFICATIONS: A qualified firm, with a minimum of 10 years similar experience with membrane roofs, that is approved, authorized, or licensed by membrane roofing system manufacture to install manufacture's product and that is eligible to receive manufacture's special warranty. The estimated price range is between $100,000.00 to $250,000.00. The contractor awarded the contract must have active registration in the Central Contractor Registration (CCR) before award can be made. Contractors can register at www.ccr.gov NAICS Code is 238160 This procurement is a VERY SMALL BUSINESS SET-ASIDE. Attached is a copy of the Request for Offer package. There is a mandatory site visit scheduled for March 10, 2011. Offers are due March 17, 2011. If you have questions, please contact Melody McGovern at area code 847/294-7347 or by email at melody.mcgovern@faa.gov. Service Disabled Veteran Owned Small Business (SDVOSB) and certified 8(a) contractors are highly encouraged to submit a request for this project. This Notice is for informational purposes for Minority, Women-Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT), Office of Small and Disadvantaged Business Utilization, has programs to assist small businesses, small businesses owned and controlled by a socially and economically disadvantaged individuals, and women-owned concerns to acquire capital and bonding assistance for transportation-related contracts. This is applicable to any eligible prime or subcontract at any tier. The DOT Bonding Assistance Program enables firms to apply for bid, payment, and performance bonds up to $1.0 million per contract. The DOT provides an 80 percent guaranty on the bond amount to a surety against losses. Loans are also available under the DOT short Term receivable financing. The maximum line of credit is $750,000. For further information regarding the bonding and lending programs please call the DOT Office of Small and Disadvantaged Business Utilization at (800) 532-1169
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOT/FAA/GLR/DTFACN-11-R-00125/listing.html)
- Record
- SN02387240-W 20110226/110224234754-cb134966db279fe6037f355be685d148 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |