MODIFICATION
13 -- This extends the response date from March 04, 2011 to March 11,2011 for the 30MM X 173 MK266 High Explosive Incendiary-Training(HEI-T)(AB44) Cartridges in MK15 Linked Belts.
- Notice Date
- 3/3/2011
- Notice Type
- Modification/Amendment
- NAICS
- 332993
— Ammunition (except Small Arms) Manufacturing
- Contracting Office
- Rock Island Contracting Center (RI-CC), ATTN: AMSAS-AC, Rock Island, IL 61299-6500
- ZIP Code
- 61299-6500
- Solicitation Number
- W52P1J11R0060
- Response Due
- 3/11/2011
- Archive Date
- 5/10/2011
- Point of Contact
- Rosalie LASHBROOK, 309/782-7947
- E-Mail Address
-
Rock Island Contracting Center (RI-CC)
(rosalie.lashbrook@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- DESCRIPTION: The U. S. Army Contracting Command, Rock Island Contracting Center, on behalf of the Office of the Project Manager, Maneuver Ammunition Systems, located at Picatinny, NJ is seeking possible Sources Sought/Market Research to identify potential sources capable of manufacturing 30MM X 173 MK266 MOD 1 High Explosive Incendiary-Training (HEI-T), in linked belts (AB44) cartridges. The 30MM MK266 Mod 1 HEI-T (High Explosive Incendiary-Traced) cartridge is designed to function in the 30mm MK 44 automatic gun. It is a MK15 linked configuration consisting of an aluminum cartridge case, IB52 loaded flashtube, M36A2 percussion primer, propellant, and a hardened steel projectile body containing incendiary and explosive composition, fuze, tracer, and a rotating band. Two belts composed of fifteen cartridges are packed into the M592 container and palletized. Cartridge performance requirements include Function and Casualty, Muzzle Velocity, Chamber Pressure, Action Time, Accuracy, Environmental Conditions, and Waterproofness. SPECIFICATIONS: The Government does not own a technical data package (TDP). The cartridges are procured from a Performance Specification, which is classified Distribution D (Authorized to the Department of Defense and DoD contractors only). WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act, (Title 22, U.S.C., SEC 2751 ET SEQ.) or the Export Administration Act of 1979, (Title 50, U.S.C., APP 2401, ET SEQ) as amended. Violation of these export laws is subject to severe criminal penalties. Disseminate IAW provision of DOD Directive 5230.25. Offerors must be registered with the U.S./Canada Joint Certification Office to obtain a copy of the specification and top drawings (See www.dlis.dla.mil/jcp/ for instructions and information). PLANNED ACQUISITION: A respondent's production capacity must be sufficient to manufacture a range quantity of approximately 25,000 to 50,000 cartridges per year and with deliveries beginning 9 months after contract award. SUBMISSION INFORMATION: A respondent to this market survey must have the facilities and skills required to produce and qualify the 30MM MK266 Mod 1 HEI-T cartridges. Specific production capabilities and skills required are as follows: prime case machine to insert the flashtube assembly and percussion primer into the cartridge case; propellant loader to weigh propellant and charge the cartridge case; projectile charging and fuze insertion; cartridge assembly loader to insert the projectile body into the cartridge case, crimp, and gage cartridge chamber and height; pack-out equipment to assemble cartridges into tubes and load into containers; and ballistic test facilities and equipment for measuring velocity, pressure, action time, time of flight, etc. Besides Load, Assemble, and Pack (LAP) equipment, additional production capabilities required are furnaces for heat treat and annealing, metal forming and machining equipment, anodize and phosphate systems, material handling systems, tool room equipment, ultrasonic test equipment, and metrology and metallurgy laboratories. Specific skills required include: ammunition process/design engineers, set-up mechanics familiar with ammunition component and LAP production equipment; toolmakers and machinists to support all production facilities/equipment; personnel for programming and operation of LAP manufacturing equipment; certified inspectors, quality control engineers, and ballistics test personnel for in-process and final inspection, pack-out, First Article Test (FAT) and Lot Acceptance Test (LAT) ballistics testing, and shipment of ammunition products; machine operators for set-up and operation of various metal forming and machine tool production manufacturing equipment; personnel with expertise to control heat treat, quench, temper of metal products to obtain ductility and hardness requirements; personnel familiar with phosphate and anodizing systems; ultrasonic technicians; metallurgists to test raw materials throughout the process to a finished product; personnel with extensive expertise in the manufacture and handling of propellant and explosives; and skills needed to maintain several items of unique or special type pieces of the equipment and facilities. Interested U.S./Canadian firms who feel they are capable of manufacturing the 30MM MK266 Mod 1 HEI-T Cartridges are invited to indicate their interest by providing the Government a brief summary of its company's capabilities, including a brief description of facilities, personnel and past manufacturing experience as it relates to the above criteria. In addition, information regarding suppliers for critical components. Information must be submitted to Ms. Rosalie Lashbrook at the Rock Island Contracting Center via email address: Rosalie.lashbrook@us.army.mil Please respond NO LATER THAN March 11, 2011, and identify 30MM MK266 Mod 1 HEI-T Cartridge Sources Sought/Market Research as the subject of your response. This is a market survey for planning purposes only and shall not be construed as a Request for Proposal or as an obligation on the part of the Government. The Government does not intend to award a contract based on this market survey or otherwise pay for information solicited. The information you provide will only be utilized by the Rock Island Contracting Center in developing its acquisition approach for future requirements.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/beda7fa6b1bb6498348ba9c911576b8b)
- Place of Performance
- Address: Rock Island Contracting Center (RI-CC) ATTN: CCRC-AF, Rock Island IL
- Zip Code: 61299-8000
- Zip Code: 61299-8000
- Record
- SN02392362-W 20110305/110303234353-beda7fa6b1bb6498348ba9c911576b8b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |