MODIFICATION
20 -- Port Exhaust Repair - DWG 1230-001-259-C
- Notice Date
- 3/8/2011
- Notice Type
- Modification/Amendment
- NAICS
- 332996
— Fabricated Pipe and Pipe Fitting Manufacturing
- Contracting Office
- Department of the Navy, Military Sealift Command, MSC East - Norfork, Virginia, Bldg 238/2 B Street, Camp Pendleton, Virginia Beach, Virginia, 23451
- ZIP Code
- 23451
- Solicitation Number
- N40442-11-T-7367
- Archive Date
- 3/30/2011
- Point of Contact
- Roy J. Williams, Phone: 757-443-5960
- E-Mail Address
-
roy.williams@navy.mil
(roy.williams@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Page 2 Page 1 THIS SOLICITATION HAS BEEN MODIFIED TO INCLUDE DRAWINGS REFERENCED IN THE SOLICITATION (DWG 1230-001-259-C) AND TO INCLUDE THE PLACE OF PERFORMANCE TO BE IN NORFOLK, VA OR SURROUNDING AREA. THIS MODIFICATION REPRESENTS CHANGE B THIS SOLICITATION HAS BEEN MODIFIED TO INCLUDE DRAWINGS REFERENCED IN THE SOLICITATION. THIS REPRESENTS CHANGE A This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is N40442-11-T-7367, and it is being issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-48, effective 30 DEC 2010. NAICS code 332996 applies. This is a small business set-aside. Military Sealift Fleet Support Command (MSFSC), Norfolk, VA intends to award a firm fixed price purchase order for USNS Apache for the following services: The requested period of performance for the below service is 18 April 2011-1 May 2011. 1.0 ABSTRACT 1.1 This work item provides for the renewal of the Main Engine exhaust piping port side through the upper pump room. 1.2 Any entity wishing to bid must perform an onsite ship-check to verify existing conditions and ability to accomplish the tasks as stated below. Ship-checks will only be completed between 10 March 2011 and 12 March 2011. Contact Gerald Teeney at 757-282-8061 to arrange for a ship-check. 2.0 REFERENCES/ ENCLOSURES 2.1 REFERENCES 2.1.1 Arrangement Drawings 1230-001-259-C 2.2 Diesel Engine Exhaust Piping ARR&Dets, #4842559 2.3 ENCLOSURES: None 3.0 DESCRIPTION/LOCATION/QUANTITY 3.1 Approximately ten (10) linear feet of pipe 26"OD X.250" STL,UN-GALV, ASTM A-53 GR A exhaust piping running along the horizontal section from the port main engine BHD 49 to the vertical uptake on the Port stack.. Include the 26 inch 90 degree Large Radius Elbow at the end of the vertical run. Use drawings for specifics on material. 4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES 4.1 From DWG# 1230-001-259-C Exhaust: P-3 10 feet of 26" pipe F-1 90 degree elbow 26" 5.0 NOTES 5.1 Ship check to verify exact dimensions, quantities and lagging thickness. 5.2 Temporarily remove interference's in AC flat that are in way of the exhaust pipe repair and after repair is complete restore interferences to original condition. 5.3 No known hazardous material exist in this work item. 5.4 Contact ABS and schedule check points for regulatory inspections. 5.5 Contract the services of a Marine Chemist to certify safe for hot work and provide daily checks of safe for hot work by a competent person. 5.6 A ship check is recommended for all of this work. 5.7 The pipe and elbow might have to be installed in half sections due to the size limitations of the egresses to the upper pump (A/C) room. 6.0 NOT USED 7.0 STATEMENT OF WORK 7.1 Temporarily remove all interferences to complete this work item 7.2 Remove and scrap the existing lagging from the Pump Room WT BHD Frame 49 to the overhead of the main deck at Frame 42 on the port MDE 26 inch exhaust pipe. 7.3 Take NDT readings to determine condition of pipe. 7.4 Provide CHENG with sketch of readings and determine the section of pipe to be replaced. 7.5 Crop out existing piping up to and including the elbow running up the stack. Ensure all fit-up and welding are in accordance with ABS requirements, including any testing ABS requires. 7.6 Conduct dye penetrate test to be witnessed by ABS rep. and MSFSC rep. 7.6 Provide new gaskets, bolts/hardware, and hangers, if required. 7.7 Test the system, running the engines to 900 RPM (before re-lagging) to test for leaks. The Contractor is responsible to repair all leaks. 7.8 Provide and install new lagging, template from existing. All material to meet or exceed the USCG requirements for exhaust insulation in engine spaces. In addition, install removable blankets over the Port expansion joints. 7.9 Clean, prime and paint all new and disturbed areas to match existing. Provide new label plates and exhaust markings where required. Similar to old system. 8.0 GENERAL REQUIREMENTS: None Additional. 9.0 Additional Information 9.1 All quotes should include the following information. Demonstrate in detail, an understanding of the overall scope of work and the plan to accomplish that work by providing a brief write up of the scope of work and sequence of critical milestones such as: Interference removals. Rip outs. Exhaust piping fit-up. Completion of all welding with ABS approvals. Testing Coating system application and lagging. Reinstallation of interferences. Touch ups and clean up. Identify any foreseen potential problem areas in accomplishing the work Submit man-hour estimates by trade with totals. Identify all proposed subcontractors. The following FAR and DFAR provisions and clauses apply to this solicitation and are incorporated by reference: 52.204-7 Central Contractor Registration; 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Alt I Offeror Representations and Certifications - Commercial Items (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the ORCA website, http://orca.bpn.gov.) 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.219-28 Post-Award Small Business Program Representation. 52.222-3 Convict Labor, 52.222-19 Child Labor - Cooperation with Authorities and Remedies, 52.222-21 Prohibition of Segregated Facilities, 52.222-26 Equal Opportunity, 52.222-35 Equal Opportunity for Disabled Veterans (over 100K) 52.222-36 Affirmative Action for Workers with Disabilities, (Over 15K) 52.222-37 Employment Reports on Special Disabled Veterans (When 52.222-35 Applies) 52.223-18 Contractor Policy to Ban Text Messaging While Driving 52.225-13 Restrictions on Certain Foreign Purchases, and 52.232-33 Payment by Electronic Funds Transfer --Central Contractor Registration 52.222-41 Service Contract Act 52.215-5 Facsimile Proposals: (757) 443-5982 52.232-18 Availability of Funds (only used with an unapproved budget, not standard) 252.204-7004 Required Central Contractor Registration. Alternate A; 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Application to Defense Acquisition of Commercial Items 252.225-7000 Buy American Act--Balance of Payments Program Certificate, 252.232-7003 Electronic Submission of Payment Requests; and 252.247-7023 Transportation of Supplies by Sea Alternate III. 52.252-2 Clauses Incorporated by Reference This contract incorporates one or more clauses by reference with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause my be accessed electronically at this/these address(es): http://www.arnet.gov/far Responsible sources shall provide the following: 1. Price quote which identifies the requested item(s), unit price, and extended price 2. Total price 3. Prompt Payment Terms 4. Remittance address, Tax Identification Number, DUNS number and Cage Code 5. Responses to this solicitation are due 15March 2011 at 0800 local time, Norfolk, VA. LATE QUOTES MAY NOT BE CONSIDERED FOR EVALUATION. Quotes may be emailed to Roy.Williams@navy.mil or faxed via 757-443-5982 Attn: Roy Williams. Please reference the solicitation number on your quote. BASIS FOR AWARD: Award will be made to the responsible, technically acceptable quoter, whose quote, conforming to the combined Synopsis/Solicitation, offers the lowest evaluated price.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/MSC/N322051/N40442-11-T-7367/listing.html)
- Record
- SN02396188-W 20110310/110308234655-7a98a9bf680065a0ac1ae3779174955a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |