SOLICITATION NOTICE
25 -- WINDOW, VEHICULAR NSN: 2510-01-527-4963
- Notice Date
- 4/13/2011
- Notice Type
- Presolicitation
- NAICS
- 336211
— Motor Vehicle Body Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L311Q1090
- Archive Date
- 5/12/2011
- Point of Contact
- LISA CLARK MORRISON, Phone: 7406929919
- E-Mail Address
-
LISA.MORRISON@DLA.MIL
(LISA.MORRISON@DLA.MIL)
- Small Business Set-Aside
- Total Small Business
- Description
- ITEM DESCRIPTION FOR PR: 0040964821 WINDOW, VEHICULAR. IMPORTANT NOTE: THIS ITEM REQUIRES CONTRACTOR FIRST ARTICLE TESTING AND GOVERNMENT BALLISTIC TESTING AS INSTRUCTED PER DRAWING 12535449 AND ATPD 2352. THE RESULTS FROM THIS REQUIRED TESTING MUST BE AVAILABLE FOR REVIEW BY A GOVERNMENT REPRESENTATIVE BEFORE ACCEPTANCE. ALL SUPPLIERS MUST MEET ATPD 2353, "4.1.3 PRODUCTION CONTROL TEST" REQUIREMENTS WHICH APPLIES TO THE MATERIAL PRODUCTION LOT. THIS APPLIES WHETHER FIRST ARTICLE IS REQUIRED OR NOT. EXCEPTION TO ATPD 2352P, SECTION 6.1.1: SECOND SENTENCE DOES NOT APPLY. THIS SENTENCE WILL BE REMOVED IN FUTURE REVISIONS. DRAWING PACKAGE CITED IS SUBJECT TO EXPORT-CONTROL REGULATIONS AND DISTRIBUTION IS LIMITED TO THOSE CONTRACTORS QUALIFIED THROUGH JCP CERTIFICATION. TO APPLY FOR CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT." FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: UNITED STATES/CANADA JOINT CERTIFICATION OFFICE DEFENSE LOGISITICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE,NORTH BATTLE CREEK, MI 49017-3084. CONTRACTS WILL BE AWARDED ONLY TO THOSE CONTRACTORS WITH JCP CERTIFICATION ISSUED PRIOR TO AN AWARD. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). "ANY ITEM PREVIOUSLY TESTED BY A VENDOR IN ACCORDANCE WITH *** QUALIFICATION*** REQUIREMENTS (FOR EXAMPLE: FAT, HIGH SHOCK AND/OR VIBRATION TEST), STATED ON DWG, SPECIFICATION, OR STANDARD MAY NOT REQUIRE FURTHER TESTING BY THE SAME VENDOR EXCEPT FOR A LATER CHANGE IN DESIGN, MANUFACTURING PROCEDURES, OR TESTING REQUIREMENTS. A CERTIFICATION OF CONFORMANCE WITH PREVIOUS TEST RESULTS ATTESTING APPLICABILITY SHALL BE SUBMITTED FOR ITEMS PREVIOUSLY TESTED." THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. MATERIAL FURNISHED SHALL CONTAIN NO MERCURY OR MERCURY COMPOUND AND SHALL BE FREE FROM MERCURY CONTAMINATION PER DCSC DRAWING 16236 CS-4320-0442. "FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY. TECHNICAL INSPECTION IS REQUIRED. THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE." FULL AND OPEN COMPETITION APPLY CRITICAL APPLICATION ITEM I/A/W DRAWING NR 19207 12420325 REFNO AMEND NR E DTD 05/01/06 TYPE NUMBER I/A/W DRAWING NR 19207 12509791 REFNO AMEND NR DTD 01/30/09 TYPE NUMBER I/A/W DRAWING NR 19207 12509792 BASIC AMEND NR B DTD 10/21/09 TYPE NUMBER 12509792-004 I/A/W DRAWING NR 19207 12509792-004 REFNO AMEND NR DTD 03/23/11 TYPE NUMBER I/A/W DRAWING NR 19207 12535449 REFNO AMEND NR DTD 07/23/07 TYPE NUMBER I/A/W DRAWING NR 19207 ATPD2352 REFNO AMEND NR R DTD 04/26/10 TYPE NUMBER
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L311Q1090/listing.html)
- Record
- SN02423811-W 20110415/110413234516-cd1ada5de3b8aa89db5a9808463af1c1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |