SOLICITATION NOTICE
47 -- Cooling Water Hose Assemblies
- Notice Date
- 4/19/2011
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 326220
— Rubber and Plastics Hoses and Belting Manufacturing
- Contracting Office
- SPMYM1 DLA NORFOLK NAVAL SHIPYARD CONTRACTING DIVISION (DLA-NMD) Bldg. 1500, 2nd Floor Portsmouth, VA
- ZIP Code
- 00000
- Solicitation Number
- SPMYM111T0043
- Response Due
- 4/22/2011
- Archive Date
- 5/7/2011
- Point of Contact
- Ronda Jones 757-396-8023
- Small Business Set-Aside
- N/A
- Description
- The Defense Logistics Agency, DLA Maritime, Norfolk Naval Shipyard Contracting Office intends to negotiate a Firm Fixed Price contract to procure Cooling Water Hose Assemblies for use at the Norfolk Naval Shipyard in Portsmouth, VA. The hose assemblies shall be fabricated in accordance with the following specifications. The North American Industry Classification System (NAICS) code is 326220 and the procurement will be unrestricted. The contract line items are as follows: CLIN 0001, 1-1/2 Cooling Water Hose Assemblies in accordance with the following ordering data: THE HOSE SHALL CONSIST OF OIL RESISTANT RUBBER LINER TUBE, A FIBER BRAID, A HIGH TENSILE STEEL WIRE REINFORCED, AND AN OIL RESISTANT, SYNTHETIC RUBBER COVER. THE HOSE INNER LINER (TUBE) AND OUTER COVER COLOR SHALL BE BLACK. THE COLOR SHALL BE THROUGHLY EMBEDDED INTO THE REINFORCEMENT AND HELICAL WIRE (S) TO PROVIDE A HOMOGENOUS HOSE WALL AND RESULT IN SUFFICIENT ADHESION TO MEET REQUIRED HOSE APPLICATION AS FOLLOWS: HOSE DESIGN FOR PETROLEUM BASE HYDRAULIC FLUIDS AND LUBRICATING OILS, DIESEL FUELS AND ANTIFREEZE SOLUTIONS WITHIN TEMP RANGE 40 DEG F TO +212 DEF F. WATER, WATER/OIL EMULSION AND WATER/GLYCOL HYDRAULIC SOLUTIONS UP TO +185 DEG F. AIR UP TO +150 DG F., 1.375" / 1.422" I.D. X 1.719" / 1.781" O.D., MUST HAVE A MINIMUM BEND RADIUS OF 10-1/2 . HOSE TO HAVE WORKING PRESSURE OF 500 PSIG. WEIGHT: 0.68 LBS. PER FOOT WITHOUT END FITTINGS. MUST BE RESISTANT TO WEATHER, OIL, SOLVENTS, AND MILD ACIDS. HOSES ARE TO BE PROVIDED IN 50 FOOT LENGTHS (+12 / -12 ) WITH PLASTIC CLEANLINESS CAPS ATTACHED TO EACH END. HOSE ASSY SHALL HAVE THE FOLLOWING PERMANENTLY/MECHANICALLY ATTACHED: 1-1/2 MALE HOSE (NPSH 11-1/2 THREADS PER INCH) ON ONE END AND 1-1/2 FEMALE HOSE SWIVEL (BALL BEARING) (NPSH 11-1/2 THREADS PER INCH) ON THE OTHER END. FITTINGS MUST BE RED BRASS ALLOY C84400, C90500 OR C92200. ALL THREADED JOINTS SHALL BE ASSEMBLED USING LOCTITE 562 SERIES SEALANT. TEFLON TAPE OR PLUMBERS PUTTY IS NOT AUTHORIZED AND SHALL NOT BE USED. EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG S NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING. SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 600 PSIG WITH CLEAN, FRESH WATER FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES. A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE NMD.4D TO BE FILED WITH CONTRACT. AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION PROCESS. HOSE MUST BE PALLETIZED. Quantity: 340 (Delivery to start immediately upon award your best delivery will be requested) CLIN 0002, 2-1/2 Cooling Water Hose Assemblies in accordance with the following ordering data: THE HOSE SHALL CONSIST OF OIL RESISTANT RUBBER LINER TUBE, A FIBER BRAID, A HIGH TENSILE STEEL WIRE REINFORCED, AND AN OIL RESISTANT, SYNTHETIC RUBBER COVER. THE HOSE INNER LINER (TUBE) AND OUTER COVER COLOR SHALL BE BLACK. THE COLOR SHALL BE THROUGHLY EMBEDDED INTO THE REINFORCEMENT AND HELICAL WIRE (S) TO PROVIDE A HOMOGENOUS HOSE WALL AND RESULT IN SUFFICIENT ADHESION TO MEET REQUIRED HOSE APPLICATION AS FOLLOWS: HOSE DESIGN FOR PETROLEUM BASE HYDRAULIC FLUIDS AND LUBRICATING OILS, DIESEL FUELS AND ANTI-FREEZE SOLUTIONS WITHIN TEMP RANGE 40 DEG F TO +212 DEF F. WATER, WATER/OIL EMULSION AND WATER/GLYCOL HYDRAULIC SOLUTIONS UP TO +185 DEG F. AIR UP TO +150 DEG F. 2.375" / 2.437" I.D. X 2.828" / 2.922" O.D. MUST HAVE A MINIMUM BEND RADIUS OF 24 . HOSE TO HAVE WORKING PRESSURE OF 350 PSIG. WEIGHT: 1.31 LBS. PER FOOT WITHOUT END FITTINGS. MUST BE RESISTANT TO WEATHER, OIL, SOLVENTS, AND MILD ACIDS. HOSES ARE TO BE PROVIDED IN 50 FOOT LENGTHS (+12 / -12 ) WITH PLASTIC CLEANLINESS CAPS ON EACH END. HOSE ASSY SHALL HAVE THE FOLLOWING PERMANENTLY/MECHANICALLY ATTACHED: 2-1/2 MALE HOSE (NPSH 7-1/2 THREADS PER INCH) ON ONE END AND 2-1/2 FEMALE HOSE SWIVEL (BALL BEARING) (NPSH 7-1/2 THREADS PER INCH) ON THE OTHER END. FITTINGS MUST BE RED BRASS ALLOY C84400, C90500 OR C92200. ALL THREADED JOINTS SHALL BE ASSEMBLED USING LOCTITE 562 SERIES SEALANT. TEFLON TAPE OR PLUMBERS PUTTY IS NOT AUTHORIZED AND SHALL NOT BE USED. EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG S NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING. SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 600 PSIG WITH CLEAN, FRESH WATER FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES. A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE NMD.4D TO BE FILED WITH CONTRACT. AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION PROCESS. HOSE MUST BE PALLETIZED. Quantity: 280 (Delivery to start immediately upon award your best delivery will be requested) The solicitation number is SPMYM1-11-T-0043. Technical questions must be written and sent by email to Ronda Jones at ronda.jones@navy.mil. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at either www.neco.mil or www.fedbizopps.gov as this office no longer issues hard-copy solicitations. The NECO website has a submit bid button next to the solicitation number. Do not use the submit bid button on NECO to submit your proposal. By submitting a proposal, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/4481e88a4296534b0a9c3545533389f5)
- Record
- SN02427835-W 20110421/110419234602-4481e88a4296534b0a9c3545533389f5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |