Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF APRIL 29, 2011 FBO #3443
SOURCES SOUGHT

C -- Architect and Engineer Services – Potential Sources Sought

Notice Date
4/27/2011
 
Notice Type
Sources Sought
 
NAICS
541330 — Engineering Services
 
Contracting Office
Department of the Army, U.S. Army Corps of Engineers, USACE District, Philadelphia, 100 Penn Square East, Wanamaker Bldg (RM 643), Philadelphia, Pennsylvania, 19107-3390, United States
 
ZIP Code
19107-3390
 
Solicitation Number
W912BU-11-AE-CENTCOM
 
Archive Date
5/27/2011
 
Point of Contact
Michelle L. Johnson, Phone: 2156566774
 
E-Mail Address
Michelle.L.Johnson@usace.army.mil
(Michelle.L.Johnson@usace.army.mil)
 
Small Business Set-Aside
N/A
 
Description
1. CONTRACT INFORMATION: This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS. NO SOLICITATION IS CURRENTLY AVAILABLE. A Market Survey is being conducted to determine if there are adequate Small Businesses, HUBZone, 8(a), or Service Disabled Veteran Owned Business contractors for the following proposed contract. The Philadelphia District, U.S. Army Corps of Engineers intends to award a Single Award Task Order Contract (SATOC) for Architectural and General Engineering Services. The contract will be for a base period with options for up to four (4) additional periods. A contract period shall not exceed 12 months. The estimated maximum task order is $5,000,000.00. The cumulative amount of all task orders is estimated to not exceed $60,000,000.00 in either the base or any of the option periods. An option will be awarded at the discretion of the Contracting Officer based on reaching the time limit. 2. PROJECT INFORMATION: The selected firm will be used primarily for Architectural and General Engineering type services in support of the Middle East District (MED) of Winchester, Virginia to include primarily design work in all areas in the CENTCOM Area of Responsibility (AOR), excluding the countries of Afghanistan, Tajikistan, Kazakhstan, Turkmenistan, Pakistan, Uzbekistan, and Kyrgyzstan; and Iraq, Kuwait, and Saudi Arabia The actual work will be done at the Contractor's office, except for trips to the Corps' Office(s), the project sites within this AOR, or other facilities as required for completion of a task. The A-E may be required to perform all or part of the design services and construction support services. A full range of services may be required, from the initial stages of program development and planning, through all aspects of design, to support of construction supervision, inspection, and administration. Task orders issued under this contract will not include positions or efforts that are considered to be inherently Governmental, i.e., those that are reserved by statute or regulations to be performed by military or civilian employees of the U.S. Government (such as Contracting Officers of various types and kinds, resident and area engineers, etc.). However, it is the intent of this contract that the A-E may be called upon to serve as close advisors, assistants or deputies to U.S. Government personnel that are filling such positions. The work under this contract will primarily be in support of Military missions at MED. However, work for other Military Installations, work under the Civil Works, and the Support for Others Program, and missions assigned MED including but not limited to USAID, Foreign Military Sales (FMS), Command Emergency Response Program (CERP), or support to Foreign Government(s) may be a part of the contract. Primary work under this contract will involve but not be limited to; the construction, renovations, repairs and additions to institutional and industrial facilities. Facilities under this group include but are not limited to: A06 Airports including lighting, terminals, and hangars: G01 Garages, Vehicle Maintenance Facilities; H09 Hospital and Medical Facilities; S04 Sewage collection, treatment & disposal; W03 Water supply treatment and distribution; W01 Warehouses and Depots; etc. Other secondary work may include the construction, renovation, repair and addition to: residential, commercial, and recreational facilities. Facilities under this group include but are not limited to: D01 Barracks, Dormitories; D07 Dining Halls, clubs, restaurants; C11 Community Facilities; O01 Office Buildings; etc. Types of related work including but not limited to concept and planning type efforts including preparation of DD form 1391 (Military Construction Project Data) in accordance with Army Regulation 415-1, economic analyses, Force Protection, Planning Charrettes, Design Charrettes, Design-Build RFP's, highway, airfield paving including runways, and other paved surfaces, utility systems, site work, interior design, and landscaping shall be a part of both the primary and secondary work. Both primary and secondary work shall include: architectural, civil, structural, mechanical, electrical, fire protection, sanitary, geotechnical, interior design, support during construction, and landscaping. Other related work shall include Bill of Material take off's, historical preservation, life safety analysis, storm water management, Americans with Disabilities Act (ADA) conformance (if applicable), economic and life cycle cost analysis, planning, site investigations, design analysis, claims analysis, schedule preparation, surveying, GIS support, studies, reports, contingency standard designs, aggressive schedules, and expert witness efforts. The Third level of work under this contract shall include but not be limited to: preparation of concept, preliminary and detailed designs for the removal/remediation/abatement/restoration of facilities and/or areas with environmental hazards including soil and groundwater, lead paint, asbestos, PCB's, CFC's, and other contaminated wastes. Professional qualifications in the Primary areas shall include but not be limited to: architect, civil, geotechnical, structural, mechanical, electrical, fire protection engineers, landscape architect, interior designer, surveyor, specification writer and cost estimator for these efforts. Technical support, including drawing production, and other related efforts shall be required. Secondary professional qualification for other related and secondary design efforts shall include but not be limited to: environmental engineer, environmental scientist, certified industrial hygienist, biologist, geologist, chemist, hydrology, hydraulic engineering, Technical support, including drawing production, graphics, and other related efforts shall be required. Responding firms shall indicate their experience with the Automated Review Management Systems (DrChecks), the Corps of Engineers computer aided estimating system (known as MCACES and including MII, PACES, and PC Cost), the U. S. Army Corps of Engineers Computerized Specifications (SPECSINTACT), and the production of drawings and graphic data in Computer aided Drafting and Design system (CADD) which will be in MicroStation, and which will have products which will require the use of BIM (Building Information Modeling) technology. The contractor must be able to supply completed products in MED PC compatible software. The contractor shall adhere to the Tri-Service spatial Data Standards. The firms must be qualified in the work areas described and be familiar with the requirements and regulations of the Corps of Engineers, the Building Codes, EPA, and other agencies which have jurisdiction. 3. SUBMISSION REQUIREMENTS : Responses to this sources sought announcement will be used by the government to make appropriate acquisition decisions. Firms which desire consideration and meet the requirements described in the announcement are invited to submit a completed SF 330 Part II (revised 6/04) for the prime firm and a short description of work of similar nature in the GRD and AED, (it is not to exceed 5 pages of typed qualifications in no less than a Font Size of 12) by E-Mail to Michelle Johnson at Michelle.L.Johnson@usace.army.mil no later than 2:00 PM EST on 13 May 2011. The NAICS Code is 541330. This is not a request for proposals. No other notification to firms for this project will be made.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA61/W912BU-11-AE-CENTCOM/listing.html)
 
Record
SN02434466-W 20110429/110427234519-6b83ccfeb3712e4a8b1687798655577b (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.