PRESOL | 59 | Electrical Equipment | 13-Jul-11

FBO DAILY ISSUE OF JULY 13, 2011 FBO #3518
SOLICITATION NOTICE

59 -- Electrical Equipment

Notice Date: 7/11/2011
Notice Type: Combined Synopsis/Solicitation
Contracting Office: 1 Rock Island Arsenal, Rock Island, IL 61201
ZIP Code: 61201
Solicitation Number: F3UUBG1081A003
Response Due: 7/13/2011
Archive Date: 1/9/2012
Point of Contact: Name: Client Services, Title: Client Services, Phone: 877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued.The solicitation number is F3UUBG1081A003 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-52. The associated North American Industrial Classification System (NAICS) code for this procurement is 335932 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-07-13 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Bagram Airfield, null 09352 The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Brand Name or Equal, to the following: LI 001, #4JC32 ALUMINUM souo METAL CLAD/MeCABLE, GAUGE CONDUCTOR 12/3COPPER, GROUND WIRE GAUGE 12COPPER, NOMINAL OD 0.530 INCH,COIL LENGTH 250 FEET, 3, EA; LI 002, #4JC30 ALUMINUM SOUD METAL CLAD/MeCABLE, GAUGE CONDUCTOR 12/ 2COPPER, GROUND WIRE GAUGE 12COPPER, NOMINAL 0 0 0.495 IN CH,COIL LENGTH 250 fEET, 10, EA; LI 003, #4W197 SOLID THHN WIRE, WIRE GAUGE 12 AWG, MAXIMUM CURRENT RATING 20 AMPS, NOMINAL 00 0.122 INCH, 600VOLTS, 500 fEET, GREEN, 2, EA; LI 004, #4W192 SOUD THHN WIRE, WIRE GAUGEAWG. MAXIMUM CURRENT RATING 20 AMPS, NOMINAL 00 0. 122 INCH. 600 VOLTS, SOO fEET, warre, 4, EA; LI 005, #4W196 SOLID THHN WIRE, WIRE GAUGE 12 AWG, MAXIMUM CURRENT RATING 20 AMPS, NOMINAL 00 0. 122 INCH, 600 VOLTS, 500 FEET, BlUE, 2, EA; LI 006, #3ZK61 ALL PURPOSE CORD, CONDUCTOR GAUGE 10/ 3, MAXIMUM VOLTAGE 300,MAXIMUM CURRENT RATING 30 AMPS,NOMINAL 00 0. 570 INCH, COILED IN CARTON LENGTH 25 0 FEET, CORDTYPE SJOOW, COLOR BLACK,STRANDED COPPER CONDUCTORS, 2, EA; LI 007, #5W578 AU PURPOSE CORD, CONDUCTORGAUGE 12/3, MAXIMUM VOLTAGE 3oo,MAXIMUM CURRENT RATING 25 AMPS,NOMINAL 0 0 0.430 INCH, SPOOLLENGTH 250 FEET, CORD TYPESJOQW, COLOR BLACK, STRANDEDCOPPER CONDUCTORS, 4, EA; LI 008, #1UGU2 PORTABLE CORD, SJOOW,GAUGE/CONDUCTOR 10/4,CONDUCTOR COPPER, SPOOl/COILLENGTH 250 FT, JACKET TYPE(AROLPRENE RUBBER, MAX AMPS 25,MAX VOLTAGE 300, COLOR BlACK,NOMINAL OlJTSlDE DIA 0. 655 IN,TEMP RANGE -40 TO 194 F,DESCRIPTION/SPECIAL FEATURESINDOOR/OUTDOOR, STANDARDS UlFLEXIBlf CORD, CSA, MSHAAPPROVED, ROHS COMPUANT, 2, EA; LI 009, #5GEE4 ORTABlE CORD, SOOW.GAlKiE/CONDUCTOR 10/5,CONDUCTOR COPPER, SPOOL/COILLENGTH 250 rr.. JACKET TYPE EPOM,MAX. AMPS 20, MAX. VOLTAGE 600,COLOR BlACK. NOMINAL OUTSIDEOIA. 0.77 IN., TEMP, RANGE -40 TO194 f. DESCRIPTION/SPECIALFEAnJRES EX'TRA Fl.fXIBLESTRANDING, ABRASION RESISTANT,RESIST OILS AND SOLVENTS, WATER,flAME AND OZONE RESISTANT,STANDARDS Ul flfXIBlf CORD, eSA,MSHA APPROVED, ROHS COMPUANT, 2, EA; LI 010, #2DP90 BREAKER ENCLOSURE 100 AMP,ENCLOSED, RAINPROOF, 240V, 10, EA; LI 011, #2GNX1 LOAD CENTER, OlJTDOOR, AMPS 200,VOLTAGE 208 /t20Y OR 24 0, THREE PHASE, MAIN CIRCUIT BREAKER MAIN CIRCUIT BREAKER, CONVERTIBLE MAINS, CIRCUIT BREAKER TYPE QOM,NUMBER Of SPACES 30, COPPER _4 -300 AWG/KCMIL, ALUMINUM WIRE _4- 300 AWG/KCMIL, BUS MATERIALCOPPER/TlN PLATfD, MATfRIAL OFCONSTRUCTION SHIELDED COPPER,NEMA RATING 3 R, INTEGRAL COVERTYPE, HEIGHT 39.37 IN, WIDTH 14.75IN, DEPTH 4. 52 IN, 10, EA; LI 012, #1H022 I-UNE PANELBOARD, FA AND FY CIRCUIT BREAKER, 2 POLES, PHASECONNECTION AB, 600 VOLTS, 30 AMPS, 1, EA; LI 013, #5JTW8 DECK SCREW, HEAD TYPE FLAT, SIZE# S, LENGTH 1 IN. STEEL. FINISHGALVANJZED. DRIVE TYPE DUALTORQ. DRIVER SIZE # 2 SQUARE OR#2 PHIWPS, THREAD TYPE COARSE.FOR Ol1TOOOR WOOD TO WOODPROJECTS. PACKAGE QUANTlTV 244, 3, EA; LI 014, #5JTX0 DECK SCREW. HEAD TYPE FlAT, SIZE'8, LENGTH 1 3/4 IN. STfEL. FINISHGALVANIZED, DRIVE lYPE DUALTORQ. DRIVER SIZE ' 2 SQUARE OR. 2 PHIWPS. THREAD TYPE COARSE,FOR OUTDOOR WOOD TO WOODPROJECTS, PACKAGE QUANTITY 15 3, 5, EA; LI 015, #2XB17 DECK SCREW, FLAT HEAD, SIZE "8,LENGTH 3 IN, STEEL, GALVANIZEDFINISH, DRIVE TYPE PHilliPS.DRIVER SIZE ' 2, THREAD TYPE UNC.OlJTDOOR WOOD TO WOODPROJECTS, PACKAGE QUANTITY 4 50, 2, EA; LI 016, #1ME36 SELF DRILLING SCREW, SHEET METAL, HEX WASHER HEAD, CASEHARDENED STEEL, ZINC f iNISH, SIZE.10, LENGTH 1 IN, DRIVER SIZE 5/16 IN, WIDTH OF HEX HEAD 0.3 05 IN, HEADHEIGHT 0. 105 IN, WASHER DIA 0.3 84IN, DRIll POINT SIZE " 3, DRillPOINT lfNGTH 0.300 IN, fORATTACHING VARIETY Of MATERIALSTO METAL UP TO 7 GAUGE,MEETS/EXCEEDS SAE J78, PACKAGE130, 5, EA; LI 017, #2CB34 HEX HEAD CAP SCREW, MEDIUMSTRENGTH, GRADE 5, MEDIUMCARBON STEEL, ZINC PLATED FINISH,THREAD SIZE 3/ 8- 16, THREAD TYPEUNC. lfNGTH UNDER HEAD 1 1/4 IN,THREAD LENGTH I 1/4 IN, HEADHEIGHT 15/64 IN, HEAD WIDTH 9/16IN, fUll't THREADED, RIGHT HANDTHREAD DIRECTION, THREADClASS2A, TENSILE STRENGTH 120, 000 PSI,ROCKwaL HARDNESSC25-(34,MfETS/EXCfEDS SAf 1429, PACKAGE100, 5, EA; LI 018, #1JY33 FLAT WASHER, USS. STEEL.. ZINCfiNISH, ms BOLTSIZES 3/8 IN,INSIDE OIA 7/16 IN, OUTSIOE OIA 1IN, THICKNESS 5/64 IN, APPUCATIONBEARING SURFACE FOR FAS~NERSAND FIXTURES, FOR USE WITHSCREW AND BOLTS, MEETS/EXCEEDSANSI 618.22.1, PACKAGE 100, 5, EA; LI 019, #2CA59 HEX HEAD SCREW, MEDIUM STRENGTH, GRADE 5, MEDIUMCARBON srea, ZINC PlATED FINISH, THREAD SIZE 1/4-20, THREAD TYPE UNe, LENGlli UNDER HEAD 1 1/2 IN,THREAD LfNGTl-t 1 1/ 2 IN, HEADHEJGtfT 11/64 IN, HEADWIDTH 7/16IN, FUUY THREADED, RIGHT HANDTHREAD DIRECTION, THREAD CLASS2A, TENSILE STRENGTH 120, 000 PSI,RQCKWEU HARDNESS C25-C34,MEETS/EXCEEDS SA.E 1429, PACKAGE100, 5, EA; LI 020, #2DA89 SPLIT LOCK WASHER, STANDARD,STEfl, ZINC PlATED fINISH, FITSBOLT SIZE 1/ 4 IN, INSIDE DlA 0.260IN, OlJTSlDf DlA 0.487 IN,THICKNESS 0.062 IN, ROCKWEllHARDNESS C384 6, HElPS PREVENTLOOSENING, fOR USE WITH BOLTSAND NlJTS, MEETS/EXCEEDS ASME818.21.1, PACKAGE 100, 5, EA; LI 021, #1KA27 HEX HEAD CAP SCREW, STANDARDHEAD TYPf, MEDIUM STRENGTH,GRADE 5, STEfl, ZINC PLATEDfiNISH, THREAD SIZE 1/4 -20,THREAD 1YPEUNC, LENGTH UNDERHEAD 2 1/2 IN, THREAD LENGTH 3/4IN MIN, HEAD HEIGHT 5/32 IN, HEADWIDTH 7/16 IN, PARTIAllYTHREADED, RIGHT HAND THREADDIRECTION, THREAD CLASS 2A,PROOF LOAD 2700 PSI, TENSILESTRENGTH 3800 PSI, ROCKWEllHARDNESS C25 -C34, MEETS/EXCEEDSSAf )4 29, PACKAGE 100, 5, EA; LI 022, #1KA32 HEX HEAD CAPSCREW, STANDARDHEAD TYPE, MeOIUM STRENGTH,GRADE 5, STEEl, ZINC PLATEDFINISH, THREAD SIZE 1/4~ 20.THREAD TYPE UNC, LENGTH UNDERHEAD 4 IN, THREAD LENGTH 3/4 INMIN, HEAD HEIGHT 5/32 IN, HEADWIDTH 7/16 IN, PARTIALLYTHREADED, RIGHT HAND THREADDIRECTION, THREAD CLASS 2,11"PROOf LOAD 2700 PSI, TENSILESTRENGTH 3800 PSI, ROCKWELLHARDNESS C25-C34. MEETS/E XCEEDSSAE 1429, PACKAGE 100, 3, EA; LI 023, #4FCA9 HEX NUT, f Ull, STEEl. fINISH ZINCPLATED, GRADE 5, THREAD SIZE1/4 20. THREAD TYPE UNC. THREADDIRECTION RIGHT HAND, WIDTH 7/ 16IN, HEIGHT 7/ 32 IN, ROCKWfUHARDNESS RC e32 MAX,A.PPUCAnON GENERAL PURPOSE,MEETS/EXCEEDS ASME/ANSI 81 8.2.21987 (Rl999). SAE J995, PACKAGEQUANTITY 100, 5, EA; LI 024, #6YY54 FENDER WASHER. STANDARD, LOWCARBON STEEL, FINISH lINC PlATED.FITS BOLT SIZES 1/4 IN, INSIDE DIA. 9/32 IN, OUTSIDE DIA. I IN, THICKNESS 0.05 1 IN, THICKNESSTOLERANCE +0.029 IN, SHEET METAL,PLUMBING, ELECTRICAL WORK, FORUSE WITH SCREWS AND STUDS,PACKAGE QUANTITY 100, 5, EA; LI 025, #4FGR8 THREADED ROO, GRADE 2, FINISHl lNC PlATED, THREAD SIZE 1/420,OVERAll lfNGTH 10 FT. THREADOI REcnON RIGHT HAND, THREADTYPE UNC. ClASS l A, TEMP. RANGENOT RATED F, TENSllf STRENGTH 65,000 PSI, ROCKWEll HARDNESS NOTRATED, 100, EA; LI 026, #5JTR6 HEX HEADCAP SCREW, HEAD TYPESTANDARD, TYPE GENERAl PURPOSE,GRADE 2, COMPARABlf TO PROPERTY ClASS 5.6, SUEL. FINISH ZIN CPlATED, THREAD SIZE 3/8-1 6,THREAD TYPE UNe, LENGTH UNDERHEAD 3/4 IN, THREAD LENGTH 3/4 IN,HEAD HEIGHT 15/64 IN, HEAD WIOTH9/16 IN, THREAD STYLE FUllYTHREADED. THREAD DIRECTIONRIGHT HAND, CLASS 2A, PROOF LOAD55,000 PSI, TENSilE STRENGTH 74,000 PSI, ROCKWEll. HARDNES S880-81 00, MEETS/EXCfEOS SAE J429AND ASME 81 8.2.1, PACKAGEQUANTITY 100, 4, EA; LI 027, #5JTR3 HEX HEAD CAP SCREW. HEAD TYPESTANDARD, TYPE GENERAL PURPOSE, GRADE 2, COMPARABLE TO PROPERTYCLASS 5.6, STEEL, FINISH ZINCPLATED, THREAD SIZE 3/8-1 6,THREAD TYPE UNC, LENGTH UNDERHEAD 1 1/2 IN, THREAD LENGTH 1 IN,HEAD HEIGHT 15/64 IN, HEAD WIDTH9/16 IN, THREAD STYLE PARTIAUYTHREADED, Tl-IREAO DIRECTlONRIGHT HAND. ClASS 2A, PROOF LOAD55,000 PSI, TENSILE STRENGTH 74.000 PSI. ROCKWEU HARDNESS880--8100. MEETS!EXCEEDS SAf 1429AND ASME 8 18.2.1. PACKAGEQUANTITY 100, 4, EA; LI 028, #2CB44 HEX HEAD SCREW. MEDIUMSTRENGTH, GRADE 5. MEDIUMCARBON STEEL.. ZINC PLATED FINISH,THREAD SIZE 3/8- 16, THREAD TYPEUNC. LENGTH UNDER HEAD 2 1/2 IN.THREAD LENGTH 2 1/2 IN, HEADHEIGHT 1/4 IN, HEAD WIDTH 9/16 IN,FUUY THREADED, RIGHT HANDTl-IREAO DIRECTION, THREAD ClASS21., TENSILE STRENGTH 120. 000 PSI,ROCKWfU HARDNESS C25-CJ4,MEETS!EXCEEDS SAf 1429. PACKAGE50, 4, EA; LI 029, #2CB50 HEX HEAD SCREW, MEDIUMSTRENGTH, GRADE 5, MEDIUMCARBONSTEEL. ZINC PlATED FINISH, THREAD SIZE 3/8- 16, THREAD TYPEUNC. LENGTH UNDER HEAD4 IN,THREAD LENGTH 4 IN, HEAD HEIGHT1/4 IN, HEAD WIDTH 9/16 IN, FUUYTHREADED, RIGtfT HAND THREADDIRECTION, THREADClASS 2A,TENSILESTRENGTH 120, 000 PSI,ROCKWEll HARDNESS C25 -C34,MEETS/EXCEEDS SAf J429. PACKAGE50, 4, EA; LI 030, #2DA93 SPUT lOCK WASHER, STANDARD,STEf l, IINC PLATED FINISH, FITSBOLT SIZE 3/ 8 IN, INSIDE DIA 0.385IN, OUTSIDE OIA 0.680 IN,THICKNESS 0.094 IN, ROCKWEUHARDNESS C38-46, HELPS PREVENTLOOSENING, f OR USE WITH BOLTSAND NUTS, MEETS/ EXCEEDS ASHE8 18.21.1, PACKAGE 100, 5, EA; LI 031, #3HEF1 HEX NUT. FUll. STEEL. fINISH ZI NC.GRADE 5, THREAD SI ZE 3/8-16.THREAD TYPEUNe, THREADDIRECTION RIGHT HAND, WIDTH 9/16IN, HEIGHT 2 1/64 IN, ROCKWEllHARDNESS C32 MAX, APPUCATIONMEDIUM STRENGTH, MEETS/EXCEEDSASME/ANSI BI8.2.2 198 7 (RI999),SAE J99 5, PACKAGE QUANTITY 100, 5, EA; LI 032, #1JY33 FLAT WASHER, USS, STEEt.. ZINCFINISH, rrrs BOLT SIZES 3/8 IN,INSIDE OIA 7/ 16 IN, OUTSIDE DIA 1IN. THICKNESS 5/64 IN, APPUCATIONBEARING SURFACE FOR FASTENERSAND FIXTURES, FOR USE WITHSCREW AND BOLTS, MEETS/EXCEEDSANSI 818.22. 1, PACKAGE 100, 5, EA; LI 033, #4FGR9 THREADED ROD, GRADE 2, FINISHZINC PLATED, THREAD SIZE 3/8-16,OVERAll LENGTH 10 FT. n-tREADDIRECTlON RIGHT HAND, THREADTYPEUNe. ClASS lA, TEMP. RANGENOT RATED F, TENSILE STRENGTH 65,000 PSI, ROCKWEll HARDNESS NOTRATED, 10, EA; LI 034, #6HGC3 HEX HEAD CAP SCREW, HEAD TYPESTANDARD,GRADE S,COMPARABlETO PROPERTY ClASS 8.8, MEDIUMCARBON STEEL. FINISH ZINC-ClfAR.THREADSIZE 1/4-20, 1/4, THREADTYPE UNe-2A. LENGTH UNDER HEAD3/4 IN., THREAD LENGTH 3/4 IN.,HEAOHEIGHT 5/32 IN., HEAD WIDTH7/16 IN., THREAD STYLE FUUYTHREADED, THREAO DIRECTIONRIGHT HAND, PROOF LOAD (PSI) 85,000, TENSILESTRENGTH (PSI ) 120,000, ROCKWEll HARDNESS HR.C 2STO HRC 34, MEETS/EXCEEDS SAE 1429AND ASME BI8.2.1, PACKAGEQUANTIlY 100, 5, EA; LI 035, #2G488 DROP-IN ANCHOR, NONFLANGE TYPEMATERIAL ZINC PlATED STEELANCHOR DIA 1/2 IN, THREAD SIZE 3/8- 16, THREAD DEPTH 1/2 IN, MIN EMBEDMENT 1 5/8 IN, ULTIMATETENSION IN 4000 PSI CONCRETE3800 LB, ULTIMATE SHEAR IN 4000PSI CONCRETE 3160 LB, DRIVE TOOLS3A498, MEETS/EXCEEDS GSASPECIFICATIONS FF-S-325, GROUPVIII, TYPE 1, PACKAGE SO, 10, EA; LI 036, #4XGE2 EXPANSION SCREWANCHOR, lEAD,LENGTH 1 1/4 IN, SCREWSIZE3/8- 16, INTERNAL THREAD SIZE3/8- 16, DRIU SIZE 3/4 IN, MIN.EMBEDMENT 1 1/4 IN, ULTIMATETENSION IN 3000 PSI CONCRETE1520 LB., use WITH 4XGE6,APPUCATION FOR USE WITH UGHTDUTY CONCRETE, BLOCK, BRICK, ANDSTONE APPUCAno, MEETS/EXCEEDSMEETS FED SPEC A-A-1922A, TYPE I,PACKAGE QUANTIT'l' 50, 2, EA; LI 037, #4XGE1 EXPANSION SCREW ANCHOR, lEAD,lfNGTl-l 7/8 IN, SCREW SrZE 1/4-20,INTERNAl THREAO SIZE 1/4 -20,DRill SI ZE 1/2 IN, MIN. EMBEDMENT7/8 IN, ULTIMATE TENSION IN 3000PSI CONCRETE 760 LB., USE WITH4XGES, APPllCAnON FOR USE WITHUGHT DUTY CONCRETE, BlOCK,BRICK, AND STONE APPUCATION,MEETS/EXCEEDS MEETS FED SPKA-A+1922A, TYPE I, PACKAGEQUANTITY 100, 2, EA; LI 038, #5YE10 CHANNEL SPRING NllT, WIDTH 1 3/8 IN, DEPTH 3/ 4 IN, 1/4 IN THICKNESS,SIZE 1/ 4 IN, COLD FORMED, STEEL, SILVER, ElfCTROPlA1l:0, ATTACHIN G OR CONNECTING A SERIES CHANNEl,PACKAGE 25, 8, EA; LI 039, #5YE59 CHANNEL SQUARE WASHER, WIDTH I5/8 IN, DEPTH 1 5/8 IN, 1/4 IN THICKNESS, SIZE 3/ 8 IN, COLD FORMED, STEEL,ElfCTRQGAlVANIZED, ATTACHING ORCONNECTING ANY SERIES CHANNEL.PACKAGE 25, 8, EA; LI 040, #5YE10 CHANNEL SPRING NllT, WIDTH 1 3/8IN, DEPTH 3/ 4 IN, 1/4 IN THICKNESS,SIZE 1/ 4 IN, COLD FORMED, STEEL, SILVER, ElfCTROPlA1l:0, ATTACHIN G OR CONNECTING A SERIES CHANNEl,PACKAGE 25, 8, EA; LI 041, #6A646 BX/FL.X CONDUIT CUTTER, lfNGTl-l 8 INCHES, 14/2 THROUGH 10/ 4 CAPACITY, WITH BlAOE STORAGE, 1, EA; LI 042, #4VDH6 CONDUIT BENDER, HANDLEINClUOED, EMf SIZE 1/2 IN,CENTERUN f BEND RADIUS 4 IN,HANDLE OlA 3/4 IN, HANDLE LENGTH38 IN, DIE-<:AST AWMINUM. CAST-IN&NCHMARK SYMBOLS, DEGREE ANDMULTIPUER SCAlfS MARKINGS, WIDEFOOT, ANGLEDGROOVES PEDAL, FORSTUB UPS, OFfSETS. BACK-Ta-BACKAND SADDLE BENDS., FOR USE WITHNO. 4VDG3 HANDLE, 1, EA; LI 043, #4VDH7 CONDUIT BENDER, HANDLEINCLUDED, EMf SIZE 3/4 IN,RIGID/IMC SIZE 1/2 IN, CENTERUNEBEND RADIUS 5 IN, HANDLE DlA 3/ 4IN, HANDLE LENGTH 38 IN, DIE-CASTALUMINUM. CAST-IN BENCHMARKSYMBOLS, DEGREE AND MULTIPUERSCAlES MARKINGS, WIDE FOOT,ANGLED GROOVES PEDAl..., FOR STIJeUPS. OfFSETS, BACKTO-BACK ANDSADDLE BENDS., FOR USE WITH NO.4VOG3 HANDLE, 1, EA; LI 044, #3A498 DROP-IN ANCHOR SETTING TOOL.THREAD SIZE 3/8-16, CONSTRUCTIONSTEEL, FOR SETTING DROP-INANCHORS, 2, EA; LI 045, #5YB79 HALF SLOT CHANNEL, LENGTH 10 FT,WIDTH 1 5/ 8 IN, DEPTH 1 5/8 IN,COLD FORMED, STEEL. 9/16 X 1 1/8IN SLOT, 1 SIDE WITH CONTINUOUSOPEN SLOT, PREGAlVANIZED, 12GAUGE, 3, EA; LI 046, #3LV34 TWO HOLE STRAP, CONDUIT SIZE 2INCHES. EMT, 4.9 1 X 1 INCHES,STEEL, PACKAGE 2S, 1, EA; LI 047, #6D119 STRAIN REUEF CORD GRIP.INS ULATED, CORD GRIP TYPEDUST-TIG HT, CABlE OJA RANGE1.25-1.50 IN, NPT SIZE 1 1/2 IN,MATERIAL OF CONSTRocnONGAlVANIZED STEEl" STANDARDSUl/CSA. INCLUDES INSULATINGBUSHING, 10, EA; LI 048, #6C093 STRAIN RELIEF CORD GRIP. NONINSULATED, CORD GRIP TYPEDUST-nGHT, CABlf OIA RANGE0.73-0.97 IN, NPTSIZE 1 IN,MATERIAL OF CONSTRUCTIONGALVANIZED STEEl, STANDARDSU!.JCSA, 10, EA; LI 049, #3D045 LOCKING PlUG, NEMACONFIGURATION L520P. CURRENTRATING 20 AMPS, POWER RATING 1HP. VOLTAGE RATING 125 VOLTS,NUMBER Of POLES 2, NUMBER OFWIRES 3, COLOR YELLOW. NYLON, 5, EA; LI 050, #3D231 SHORT WEATHERPROOF BOOT, COLOR BLACK, FOR 2 POLE 3 WIRE 20 AND30 AMP TWIST LOCK PlUGS, MATERIAL ElASTOMER, PROTECTSFROM UV RAYS AND MANYCHEMICALS, HANDGRIP KNURLS,ACCOMODATfS RANGE OF CORDSI ZES WITH STEP CORD ENTRY, 5, EA; LI 051, #6D153 STRAIN REUEF CORD GRIP,STRAIGHT. CORD GRIP TYPEUQUIDnGHT. CABLEOIA RANGE1.562-1.687 IN. NPTSIZE 2 IN,MAnR~lOFcONSTRucnONALUMINUM, STANDARDS UlICSA.INCLUDES STAINLESS STEEL MESH, 3, EA; LI 052, #5C377 STRAIGHT BLADE PLUG, CURRENTRATING IS AMPS, VOLTAGE RATING125 VOLTS, POWER RATING 1/2 HP.HEMACONFIGURAnON 5- I SP,NUMBER Of POLES 2, NUMBER OFWIRES 3, GRADE COMMERCIAl.COLOR BLACK, RUBBER, 10, EA; LI 053, #6LP34 WALL SWITCH, TOGGLE, 3 WAY. 20AMPS AC, VOLTAGE RATING 120 TO277 VAC, RATED HP I, SIDE WIRINGMETHOD, IVORY, COMMERCIALGRADE, MAINTAINED SWITCHAcnON. USED FOR UGtfTlNG, MOTORLOADS, INDUSTRIAL AND RETAilAPPUCATIONS, 20, EA; LI 054, #3LK52 CABlE/CORD CONNECTOR,KNOCKOUTSIZE 1 INCH, MAXIMUMCABLEOPENING 0.990 INCH,MINIMUM CABLEOPENING 0.690INCH, Ul AND CSA fOR NM AND NMCCABLESIZES (1) 2#6, 3_8, 4#12,3_ 12, (2 ) 2#4, 2#8, 3_10, 4_10,3 # 8 Ul AND CSA fOR SERVICEENTRANCE SIZES 3_6 THROUGH 3#4, 2 SCREWS, METAL, 10, EA; LI 055, #2DDG8 STRAIN REUEf CORD CONNECTOR,UQUID TIGHT, SlRAIGHTCONNECTOR TYPf, CORD OIA0. 500-0.750 IN, lfNGTH 2.03 IN,CONDUIT SIZE 1/ 2 IN, MIN THROATOIA 9/16 IN, MATERIAL OFCONSTRUCTION NYlON, STANDARDSUL E13938, CSA 5239 1, 20, EA; LI 056, #2DDH2 STRAIN REUEF CORD CONNECTOR.UQUID TIGtfT. STRAIGHTCONNECTOR TYPE, CORD ClA0.1 25-0.375 IN, LENGTl-I2.03 IN,CONDUIT S IZE 3/ 4 IN, MIN THROATClA 13/ 16 IN, MATERIAL OFCONSTRUC1l0N NYlON, STANDARDSUL 1 3938, (SA 52391, 20, EA; LI 057, #534FC MIPCO CONNECTOR BODY FEMALECONNECTOR, 5O AMP, 2S0Y, 3P4W (MAnS TO A MAlf 5)4MPXT PlUG), 1, EA; LI 058, #4FYC8 HAlf ADAPTER, ONE PIECE. CONDUIT SIZE 2 IN., MATERIAL OFCONSTRUCTION PVC, OlA. 2.70 IN., QVERAll lfNGTH 2.15 IN., THREAD SIZE 11.5 IN., FOR USE WITHSHEOULE 4 0 AND SCHEDULE 80 PVCCONDUIT. STANDARDS Ul, 20, EA; LI 059, #4EUA7 CONDUIT, SCHEDULE 40, TRADE SIZE1 IN., NOMINAL LENGTH 10 FT., NOMINAL OUTSIDE 01,11,. 1.315 IN.,INSIDE DlA. 1.04 9 IN., WALLTHICKNES S 0. 133 IN., MATERIAL OFCONSTRUCTION PVC, SPECIALFEATUREBEU END SPECIAL FEATURE,STANDARDS UL 651 & NEMATC 2, 100, EA; LI 060, #4FYC5 MAlE ADAPTER, ONE PIECE, CONDUITS IZE 1 IN., MATRIAl OF CONSTRUCTION PVC, OlA. 1.60 IN.,OVERAll lENGTH 2.20 IN.? THREAD S IZE 11.5 IN., FOR USE WITHSHEDULE40 AND SCHEDUlE 80 PVCCONDUIT, STANDARDS Ul, 20, EA; LI 061, #2MCX5 ElECTRONIC BAUAST, T8 LAMPSLAMP "TYPE, INSTANT START TYPE,NUMBER OF LAMPS 2, 120/ 277VOLTAGE, 0.50 TO 0.21 AMPS AC, S9INPUT WAITS. 0 MIN. STARTINGTEMP. (F). 1.00 BALlAST FACTOR,GREATER THAN 0. 98 POWER FACTOR,LESS THAN 10 TOTAL HARMONICDISTORTION ( PERCENT). ROHSCOMPLIANT SPECIAL FEATURES,NORMAL LIGHT OUTPUT, CENTIUM (R)BAllAST FAMILY, PARAUfL WIRINGTYPE, 9-1/2 LENGTH (I N.). 1 HEIGHT( IN.), 1-5/16 WIDTH ( IN.).DIMENSION REFERENCE G16,PACKAGE QUANTIlY 1, 20, EA; LI 062, SHIPPING: Shipping will be to Bagram Airfield Afghanistan, 1, LOT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination OCONUS (Outside the Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/ Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments. BIDS are to be submitted on the FedBid ONLY or they will not be accepted. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address http://farsite.hill.af.mil. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (i) Technical capability of the item offered to meet the Government requirement and price; with technical capability being more important than price. In order for the quote to be considered technical acceptable, the Government will make a determination of technical acceptability by evaluating the following: (i) Ability of the offeror to meet the schedule or timelines as stated in their solicitation (ii) The ability for the offeror to meet salient characteristics and/or brand name or equal items provided within each item requested. A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. 52.232-33, 252.232-7003, 952.201-0001, 952.232-003, 952.225-0006 In accordance with DFARS 252.232-7003, contractors must be registered in WAWF in order to submit payment requests and receiving reports. Information regarding WAWF is available on the Internet at https:// wawf.eb.mil/ Note that shipping is direct to US Military address in Afghanistan. No bids with delivery to a consolidation point will be accepted. Ensure weight requirements are checked and quoted accordingly.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/799b55e152970339bc90f7e376c9d427)
Place of Performance: Address: Bagram Airfield, null 09352; Zip Code: 09352
Record: SN02495208-W 20110713/110711234945-799b55e152970339bc90f7e376c9d427 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

59 -- Electrical Equipment