SOLICITATION NOTICE
34 -- PURCHASE VERTICAL MILLING MACHINE FOR US ARMY CORPS OF ENGINEERS, GAVINS POINT PROJECT, LOCATED NEAR YANKTON, SD
- Notice Date
- 7/20/2011
- Notice Type
- Presolicitation
- NAICS
- 333512
— Machine Tool (Metal Cutting Types) Manufacturing
- Contracting Office
- USACE District, Omaha, 1616 Capital Ave, Omaha, NE 68102-4901
- ZIP Code
- 68102-4901
- Solicitation Number
- W9128F-11-Q-G020
- Response Due
- 8/3/2011
- Archive Date
- 10/2/2011
- Point of Contact
- MONICA DWYER, 402-667-7873
- E-Mail Address
-
USACE District, Omaha
(monica.e.dwyer@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Gavins Point Project,Yankton, SD Vertical Milling Machine Part 1- General 1.1 Scope Supplier shall provide a new vertical knee style Milling Machine described herein. The equipment will be delivered to the Gavins Point Project Yankton, South Dakota. 1.2 SUBMITTALS. Product data: Supplier shall provide For Government Approval the manufacture's catalog cuts indicating product specifications. Product specifications shall be approved by the government before delivery, Part 2 - Equipment to Supply 2.1 Vertical or Knee type Milling Machine. Equipment shall be a Bridgeport Series 1-2J Milling Machine or an approved equal. 1. Milling machine shall have a 48" X 9" Table size and travel a full 36" in the X axis, with servo 140 lbs./in Torque Power Feed 2. 3 HP motor, 30 min. duty cycle, completely balanced. Nickel-plated motor shaft. No lubrication required. 3. Quill power feed is standard. Quill (3-3/8" dia.) is hard chrome-plated hand lapped for accuracy. R8 spindle with 5" quill travel 4. Quick release micrometer adjust Quill Stop 5. Spindle taper is ground on its own ABC Class 7 bearings, eliminating run out 6. Anti-friction bearings used throughout 7. Gib's are full length on saddle and knee 8. 50 degree angular ways, full bearing contact 9. Metered one-shot tube system 10. Bull and pinion gear, completely balanced 11. Ram and turret are precision ground for fit, extra rigidity. No shims or gib's used 12. Easy-to-read dials on the ram and turret 13. Easy-to-read dials on the table and cross-slide 14. All alignment ways and gibs will be completely hand scraped to within tenths of a thousandth, ensuring full bearing support. 15. Shall have single gib screw for easier adjustment 16. Chrome-plate ways and gibs to ensure long life and lubrication 17. The base shall be Dished column. 18. Speed range infinitely variable, high: 500 - 4200 RPM, Low: 60 - 500 RPM, Power Quill Feed.0015 in/rev.,.003 in/rev.,.006 in/rev The-contractor will-also provide with-this-machine the following-tooling-package: Right angle attachment set Acu-rite 3 dro in X, Y, Mill Pkg to include 13 Pc Collet Set -R-8 spring set Drill Chuck (Albriet style quick acting) with R-8 arbor 3 inch Boring Head with set of High Speed boring bar set and Carbide boring bar set Precision 6 inch Kurt Angle-lock machine vise with swivel base 52 Pc. Block and Clamp Set 8 PC End Mill holder set R-8 s Collet Rack R-8 10 inch Rotary Table 5 C-- Collets set: 32 each End Mills, 5 each: inch, 3/8 inch, inch, 1 inch, 1-1/4 inch Quick change indexing tool Power is to be 3 Ph 460 volt Part 3 -- Delivery/Contacts The supplier shall include in the supply quote all shipping charges to deliver equipment to: US ARMY CORPS OF ENGINEERS Gavins Point Powerhouse 55245 Highway 121 Crofton, NE 68730 All submittals and correspondences shall be directed to: US ARMY CORPS OP ENGINEERS Gavins Point Project P.O. Box 710 Yankton, SD 57078 Milling machine is to be delivered by end of fiscal year Sep 30, 2011
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA45/W9128F-11-Q-G020/listing.html)
- Place of Performance
- Address: USACE District, Omaha 55245 Highway 121 Crofton NE
- Zip Code: 68730
- Zip Code: 68730
- Record
- SN02505485-W 20110722/110721004621-03ff3b3f67937cfc36385687c6e21811 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |