MODIFICATION
45 -- Plumbing Supplies
- Notice Date
- 7/26/2011
- Notice Type
- Modification/Amendment
- Contracting Office
- 1 Rock Island Arsenal, Rock Island, IL 61201
- ZIP Code
- 61201
- Solicitation Number
- RCE1H3FEB04248
- Response Due
- 6/30/2011
- Archive Date
- 12/27/2011
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued.The solicitation number is RCE1H3FEB04248 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 326191 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-06-30 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be, null null The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Brand Name or Equal, to the following: LI 001, Float Switch NC 15 Amp/120V 15'Crd, 12, EA; LI 002, Floodlight, Micro Fixture Type, Quartz Halogen Lamp Type, 500, 6, EA; LI 003, Knock Out Plug, Conduit Size 1 Inch, 1.590 x 0.400 Inches, Zinc Plated Steel, 50, EA; LI 004, Knock Out Plug, Conduit Size 3/4 Inch, 1 1/4 Inches, Steel Zinc Plated, 50, EA; LI 005, Knock Out Plug, Conduit Size 1/2 Inch, 1 5/64 Inches, Steel Zinc Plated, 50, EA; LI 006, Toilet Seat,Elongated, Front Type Open,Washer, Bolt and Nut, Bolt to Seat Front 18 1/2", Width 14 1/4", 7, EA; LI 007, Water Connector,Braided Nylon, Application Toilet,Size 3/8 In,Compression,Outlet Size 7/8 In, Length 20 In, 100, EA; LI 008, Stainless Steel Braided, Faucet, Inlet Size 3/8 In., Comp, Outlet 1/2 In., FIP, Length 20 In.,, 100, EA; LI 009, Grid Drain, Lavatory, Brass, Chrome Color/Finish, Pipe Dia. 1 1/4 In.,, 12, EA; LI 010, Low Voltage T-Stat, Digital Programmable, Terminal Designations C, B, O, Y, G, W, RC, RH, W2, Y2, L, E, Aux, Control Range 40 to 99 F, Stages 2 Heat, Stages 2 Cool, Temp Settings 4 Per Day, Power Method 24VAC or Battery, Color White, Height 3 9/16 In, Width 5 13/16 In, Depth 1 1/2 In, Voltage 24 AC, 750 mV DC, Programs 5 + 1 + 1 or 5 + 2 Per Week, Display Type LCD, Backlit, Horizontal Mounting,, 6, EA; LI 011, Thermostat Cable, Spool Length 250 Feet, Solid Conductor AWG 20/6, Nominal Outside Diameter 0.160 Inch, Jacket Color Brown, Cable Type Non Plenum For Low Voltage, Temperature Rating 60 Degrees Celsius, Conductor Colors Black/Red/White/Green/Brown/Blue, 4, EA; LI 012, Cable Ties, Heavy Duty, Length (In.) 13.4, Width (In.) 0.27, Thickness 0.065 In., Tensile Strength (Lb.) 120, Max. Bundle Dia. (In.) 3-1/2, Color Black, Material of Construction Weather Resistant Nylon 6/6, Temp. Range (F) -40 To 185, Design Stainless Steel Barb, Resists -, B, Standards -, Includes -, Package Quantity 500, 12, EA; LI 013, Conduit Bender Handle, EMT Size 3/4 Inch Diameter x 38 Inches Long Handle,, 6, EA; LI 014, Conduit Bender, Handle Included, EMT Size 1/2 In, Centerline Bend Radius 4 In, Handle Dia 3/4 In, Handle Length 38 In, Die-cast Aluminum, Cast-in Benchmark Symbols, Degree and Multiplier Scales Markings, Wide Foot, Angled Grooves Pedal, For Stub Ups, Offsets, Back-to-Back and Saddle Bends., 6, EA; LI 015, Self Piercing Screw, Hex Washer Head, Hardened Steel, Ceramic Coated Finish, Size #10, Length 3 In, Driver Size 1/4 In, Washer Di.500 In, For Exterior Metal Work. 10,000 each., 1, LT; LI 016, Water Supply Stop, Angle Body Style, Inlet Size 1/2 In, Inlet Type FIP, Outlet 3/8 In, Outlet Type OD Compression, Max Pressure 125 PSI,, 120, EA; LI 017, Adapter, Pipe Size 1/2 In, Slip Socket x Male Thread Connection, Material of Construction CPVC, Schedule 80, Max Temp 140 Deg F, Color Gray,, 300, EA; LI 018, Hammer Tacker, Heavy Duty, Staple Type Flat Crown, Crown Width 3/8 In, Leg Length 5/16, 3/8 and 1/2 In,, 12, EA; LI 019, Flat Crown Staple, Type T50 Heavy Duty, Crown Width 3/8 In, Leg Length 1/2 In, Galvanized Steel, Package Quantity 1250, 25, EA; LI 020, Industrial Meter Service Kit, Multimeter, Test leads, Alligator Clips, 400A AC Current Probe, Type Thermocouple Bead Probe, 4, EA; LI 021, Float Switch, Open Tank, Length 4.38 In., Width 2.55 In., Height 4.5 In., Contact Type 2 Pole, Switch Function Open on Rise, Amps 10, Voltage 600, 2, 3, 5, Mounts Top, Ambient Temp. Range -22 To 220, Max. Water Level Adjustment -, Min. Water Level Adjustment -, Conduit Size (In.).5-.75, Includes Compensating Spring, 12, EA; LI 022, Circular Saw Blade, Blade Diameter 10 Inches, Arbor Size 5/8 Inch Round, Number of Teeth 60, Plate Thickness 0.071 Inch, Kerf 0.099, Hook Angle 5 Degrees, Tooth Grind ATB, Type Finishing, Carbide Teeth,, 10, EA; LI 023, Service Manifold, Hose Length 60 Inches, Number of Hoses 3, Number of Valves 2, Gauges High Side 0-800, Gauges Low Side 30 to 500 Inches Hg, For Use With R410A, R22, R404A, 6, EA; LI 024, Convertible Jet Pump System, Thermoplastic, 1 HP, Voltage 115/230, Suction Pipe Size 1 1/4 In., 1 NPT Outlet, 15.6/7.8 Amps AC, Tank 21 Gal., Shut Off 66 PSI, Max. Inlet Pressure 75 PSI, Max. Case Pressure 141 PSI, Motor Type Capacitor Start, ODP, Seal Type Mechanical, Suction Lift 0-100 Ft., 15, EA; LI 025, POSITIVE PLACEMENT METAL CONNECTOR NAILER, 4, EA; LI 026, Galvanized nails for above nailer 1 1/2 inches long. 10,000 each., 1, LT; LI 027, Galvanized nails for above nailer 2 1/2 inches long. 10,000 each., 1, LT; LI 028, INDUSTRIAL STEEL SAW BLADE 7-1/4", 5/8" arbor 18 carbide teeth, 12, EA; LI 029, Quadraport Air Line Splitter with Regulator 3/8" inlet and 3/8" outlets, 8, EA; LI 030, "Toilet bowl with tank Vitreous china Low-consumption (6.0 Lpf/1.6 gpf) 16-1/2"" rim height for accessible application", 30, EA; LI 031, Complete Shower units 32" x 35-1/4" x 73-1/4" four-piece design Tongue-and-groove "snap together" Lightly textured swirl-gloss finish, White in color, 15, EA; LI 032, Complete Shower units 36" x 35-1/4" x 73-1/4" four-piece design Tongue-and-groove "snap together" Lightly textured swirl-gloss finish, White in color, 15, EA; LI 033, Shipping to consolidation point at: Consolidation & Containerization Point DDSP New Cumberland Bldg. 2001 CCP Door 135 thru 168 New Cumberland, PA 17070-5001, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/ Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments. BIDS are to be submitted on the FedBid ONLY or they will not be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/bce24c09ad51dc2016b8eed5f2bc9898)
- Place of Performance
- Address: , null null
- Zip Code: null
- Zip Code: null
- Record
- SN02510440-W 20110728/110726234934-bce24c09ad51dc2016b8eed5f2bc9898 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |