SOLICITATION NOTICE
H -- Linear positioning equipment and motion control platforms used on the RAM block II rocket motor automated inspection fixture. Must be PARKER & ACS items ONLY....
- Notice Date
- 8/2/2011
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- N63394 NAVAL SURFACE WARFARE CENTER, CALIFORNIA 4363 Missile Way Port Hueneme, CA
- ZIP Code
- 00000
- Solicitation Number
- N6339411T5067
- Response Due
- 8/8/2011
- Archive Date
- 2/8/2012
- Point of Contact
- Marlena Warren 951-273-4496 Marlena Warren
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement is the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is N63394-11-T-5067 and is issued as a request for quotation (RFQ). This acquisition is firm-fixed price and is 100% set-aside for small business. The Government will award to the responsible offeror whose offer conforms to the requirement as stated in this synopsis and is the most advantageous to the Government based on the lowest price and technically acceptable. NSWC, Corona Division has a requirement for Linear positioning equipment and motion control platforms used on the RAM Block II Rocket Motor Automated Inspection Fixture. The ATK facility at West Virginia has a requirement to inspect RAM Block II Rocket Motors critical features in order to ensure safe and accurate missile operation. Parker & Acs are the required brand for this requirement. These components are replacements of components on existing gages. Replacement components are required to interface with existing hardware and software. The specific requirements needed are as follows: QtyBrandPart#Part Description 1ACSSPiiPlus CM-3-B-E-M0-NWIntegrated motion control platform, 3-axis Position Range: ±4x1015 counts Velocity:160x109 counts/sec Accuracy: 0.005% Acceleration:4x1015 counts/sec2 Sampling Rate:20 kHz Accuracy: ±1 count 1ACSSPiiPlus CM-ACCCM-ACC series connector kit 1Parker803-9191AX-Y positioning system X-axis: 406XR Series linear positioning stage Travel: 2000 mm Grade: Standard grade Screw specs: 5mm Home sensor: Home sensor N.O. current sinking, Limit sensors: Limit Sensors N.C. current sinking Motor mount: NEMA 34 in-line mount Coupling: 0.50" bore bellows style Brake: No brake Y-axis: 404XR Series linear positioning stage Travel: 50 mm Grade: Standard grade Screw specs: 5mm Home sensor: Home sensor N.O. current sinking, Limit sensors: Limit Sensors N.C. current sinking Motor mount: NEMA 23 in-line mount Coupling: 0.375" bore bellows style Brake: No brake Precision: 1.3 µm 1ParkerMPP0922C1E-NPSNMPP Series brushless servo motor Frame size: 92mm, 2 stack Feedback: 2000 lin encoder (8000 ppr) Connections: PS style quick disconnect 1ParkerBE231DJ-NPSNBE Series brushless servo motor Frame size: NEMA 23, 2 stack Feedback: 2000 lin encoder (8000 ppr) Connections: PS style quick disconnect 1ParkerMPJ1002D1E-NPSNMPJ Series medium inertia brushless servo motor Frame size: 100mm, 2 stack Feedback: 2000 lin encoder (8000 ppr) Connections: PS style quick disconnect 2ParkerP-1A1-2525 ft. motor power cable for BE231 & MPP0922 1ParkerP-3B1-2525 ft. motor power cable for MPJ1002 motor 3ParkerF-9F1-2525 ft. encoder feedback cable Shipping shall be included in the total cost of these items and must be delivered by 01 September 2011. Offeror must be registered in the Central Contractor Registration (CCR). The associated North American Industrial Classification System (NAICS) code for this procurement is 423830 with an associated small business size standard of 100 employees. Quotes are due no later than 2:00PM PST, August 8, 2011. Quotes must be valid for sixty (60) days after due date. Any amendment(s) issued to this RFQ will be published on this website. Therefore it is the offeror ™s responsibility to visit this website frequently for updated on this procurement. This requirement will be awarded on a sole-source/brand name basis in accordance with the statutory authority 10 U.S.C.2304(c)(1) as implemented by FAR Part 6.302-1(4)(c). Any and all responsible source having the technical capabilities to meet the requirement described are encouraged to submit a quote along with their technical capabilities to include complete and detailed technical specification of their product, past performance information, price, and lead time, DUNS, CAGE, & TAX Id, for consideration via email to: Marlena.warren@navy.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N63394/N6339411T5067/listing.html)
- Place of Performance
- Address: 1999 Fourth Street
- Zip Code: , Norco, CA
- Zip Code: , Norco, CA
- Record
- SN02518094-W 20110804/110802234714-0ae8e5dd58f31b71f5dc787deef9ba04 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |