SOLICITATION NOTICE
D -- BASE TELEPHONE CABLES FOR INSTALLATION PROJECT
- Notice Date
- 9/7/2011
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 517911
— Telecommunications Resellers
- Contracting Office
- M67001 MARINE CORPS BASE CAMP LEJEUNE - RCO Marine Corps Base Camp Lejeune, NC
- ZIP Code
- 00000
- Solicitation Number
- M6700111Q0305
- Response Due
- 9/12/2011
- Archive Date
- 10/12/2011
- Point of Contact
- TONY BENSON 910-450-5404
- E-Mail Address
-
BASE TELEPHONE CABLE PROJECT
(tony.benson@usmc.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Line item #0001: Qty 2 “ T1/E1-FBR, SM ST, 8KM, P/N CSDTF1012-120 DESCRIPTION: PART NO. CSDTF1012-120, MFG TRANS NTWRK. With the exception of Ethernet, T1/E1 is one of the most common campus/ metropolitan area networking interconnects. A copper to fiber conversion on the premise side of the T1/E1 makes it easier to integrate voice traffic, frame relay or IP type traffic on your fiber network. CSDTF1012-120 Twisted Pair (RJ-48) 1.5 km/0.9 mi. 1310 nm single mode (ST) 8 km/ 5 mi. Link Budget: 7.0 dB. Remote in-band management Local or Remote Loopbacks on copper or fiber in software mode Loopback switch facilitates local installation Converts the copper ports on T1/E1 devices, such as a PBX or T1/E1 Router, to multimode or single mode fiber Switch selectable RJ-48 connectors for T1 or E1 Jitter attenuators optimize Bit Error Rate (BER) performance Network debug procedures make BER testing more convenient Built-in troubleshooting with the addition of a selectable TAOS (Transmit All Ones) switch on the fiber and copper interfaces allows the network engineer to test all T1/E1 equipment on that network segment and ensure the network link. Line item #0002: Qty 6 - T1/E1-FBR, SM SC, 20KM, P/N CSDTF1014-120 DESCRIPTION: PART NO. CSDTF1014-120, TRANS NTWRK. CSDTF1014-120 Twisted Pair (RJ-48) 1.5 km/0.9 mi. to 1310 nm single mode (SC) 20 km/12.4 mi. Link Budget: 16.0 dB. Report local or remote NID status: Copper Fiber Link status Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW AIS detected Copper Fiber Model Number Copper Fiber Connector Local or remote command operations include: Loopback Copper Fiber AIS transmitted on Fiber on loss of Copper link AIS Transmitted on Copper on loss of Fiber link Boot-load firmware. Line item #0003: Qty 2 “ T1/E1-FBR, SM ST, 8KM W/NA, P/N SSDTF1012-120-NA DESCRIPTION: PART NO SSDTF1012-120-NA, TRANS NTWRK. SSDTF1012-120 Twisted Pair (RJ-48) 1.5 km/0.9 mi. 1310 nm single mode (ST) 8 km/ 5 mi. Link Budget: 7.0 dB. SW1: 1, 2, 3: Line Build out for short haul/DB in Long Haul (see table) Short Haul mode: SW1: Pos 4 not used SW2 - 1: Transmit all ones into copper on loss of fiber link (UP = Disabled) SW2 - 2: Transmit all ones (AIS) into fiber on loss of copper link (UP = Disable ) SW2 - 3: Long Haul/Short Haul (UP = Short Haul) SW2 - 4: T1/E1 selection (Up = T1). Line item #0004: Qty 6 - T1/E1-FBR, SM SC, 20KM W/NA, P/N SSDTF1014-120-NA DESCRIPTION: PART NO. SSDTF1014-120NA, TRANS NTWRK. SSDTF1014-120 Twisted Pair (RJ-48) 1.5 km/0.9 mi. to 1310 nm single mode (SC) 20 k m/12.4 mi. Link Budget: 16.Remote management in a stand-alone device When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely. The Remotely Managed T1/E1 copper to fiber media converter will provide a solution for users who desire to extend their T1 or E1 circuits over fiber and remotely manage them in-band from admin locations0 dB. Line item #0005: Qty 2 - T1/E1-FBR, SM ST LH, 15KM W/NA, P/N SSDTF1022-120-NA DESCRIPTION: PART NO. SSDTF1022-120-NA, TRANS NTWRK. SSDTF1022-120 Twisted Pair (RJ-48) 1.5 km/0.9 mi. to 1310 nm single mode (ST) 15 km/ 9.3 mi. Link BLED provides Alarm Indication Signal (AIS) Can be used with fractional T1/E1 circuits Report converter status Copper Fiber Link status Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW AIS detected Copper Fiber Model Number Copper Fiber Connector Remote commands: Loopback Copper Fiber AIS transmitted on Fiber on loss of Copper link AIS Transmitted on Copper on lossudget: 10.0 dB. Line item #0006: Qty 25 “ 144 FBR CANISTER CLOSURE, P/N SCF-6C28-01-144 DESCRIPTION: PART NO. SCF-6C28-01-144, CORNING CBL. Corning Cable Systems Splice Trays use proven designs and fiber organization technology to provide optimum physical protection for fusion and mechanical splicing methods. The trays are engineered for use with both loose tube and tight-buffered optical cable designs. Their generous size prevents induced attenuation due to fiber bending. 12-position RTV splices, 0.2-in metal tray for single fiber 8.75 in x 3.9 in x 0.2 in (22.3 cm x 10 cm x 0.54 cm) Splice Protection: RTV 100155-001 or Crimp and Go crimping device, FSA-012. Line item #0007: Qty 10 “ SPLICE CASE, P/N 8006220 DESCRIPTION: PART NO. 8006220, PERFORMED LN Product Description PLP 8006220 12.5' x 38' (318 x 711) ARMADILLO Stainless Kit with Drillable End Plates with Bonding Kits include top bottom shell halves, LOCK-BAR Assemblies, Torque Bars and two 2-section End Plate kits (except 3-section End Plates with 12.5'). Line item #0008: Qty 15 “ PRETIUM 4U RK MNT ENCL, P/N PCH-04U DESCRIPTION: PART NO. PCH-04U Pretium Connector Housing, 4U tall, accepts up to twelve CCH connectors modules, supplied with on Universal, twelve blank panels and installation hardware. Feactures; Optional splicing available in all units -Deep housing for extra room for high cable, large fiber guides, connector labeling optimized for use with machine generated labels and microsoft word templates, integerated, hinged jumper manager, transparent front door. Line item #0009: Qty 15 “ PRETIUM CONN HOUSING 2U F/4 PNLS, P/N PCH-02U DESCRIPTION: PART NO. PCH-02U, CORNING CBL. CCH-02 Corning Closet Connector Housing that will accept up to four CCH panels; comes with blank panels and hardware to strain-releve on cable with the UCC or up to five 0.4 inch or smalle cables with the UCC insert. This connector provide interconnect or cross connect capanilities between the outside plant, riser or dustribution cables, and the opto-electronics. Ideal for fiel connectionizatioon, multiple locations for jumper egress, meets requirement of ANSI/TIA/EIA-568A and 606. Brackets included for rack mounting in 19 inch or 23 inch equipment racks. Line item #0010: Qty 30 “ SING MODE PSI LTLNKR HEAT SHRINK FUSION, P/N SCF-ST-048 DESCRIPTION: PART NO. SCF-ST-048, CORNING CBL Can be used in through, branch or mid-span type splice locations Can be used in aerial, underground or direct-buried applications Accommodates up to 60 single-fiber splices (UCAO-05) Can be mounted on a pole, wall or strand Description The UCAO Splice Closure provides excellent environmental protection for optical fiber splices. The UCAO facilitates easy installation and access with its unique hinged case. The lid is secured with metal clips that snap open or closed. Each UCAO closure is lightweight, compact and watertight. The UCAO splice closure can be used in aerial, underground or direct-buried applications and can accommodate up to 60 single-fiber splices. The UCAO closure also features a modular splice tray stacker that holds up to five splice trays. Each closure comes equipped with reusable seals. No special tools are required for closure assembly and re-entry. Features / Benefits Compact, lightweight design Hinged case with snap-open clips for easy access Accommodates five compact splice trays Equipped with reusable seals No special tools required Corning Cable Systems Product.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/USMC/M67001/M6700111Q0305/listing.html)
- Place of Performance
- Address: 1116 BIRCH STREET, CAMP LEJEUNE, NC
- Zip Code: 28542
- Zip Code: 28542
- Record
- SN02566168-W 20110909/110908000258-faa4b5bef82b82946412b6bdba98b031 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |