MOD | 65 | Medical Supplies needed for an upcoming Combat Extremity Surgery Course

FBO DAILY ISSUE OF SEPTEMBER 18, 2011 FBO #3585
MODIFICATION

65 -- Medical Supplies needed for an upcoming Combat Extremity Surgery Course

Notice Date: 9/16/2011
Notice Type: Modification/Amendment
NAICS: 423450 — Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers
Contracting Office: Great Plains Regional Contracting Ofc, ATTN: MCAA GP L31 9V, 3851 Roger Brooke Drive, Fort Sam Houston, TX 78234-6200
ZIP Code: 78234-6200
Solicitation Number: W81K0011T0371
Response Due: 9/20/2011
Archive Date: 11/19/2011
Point of Contact: Joshua Barbero, 254-287-8900
E-Mail Address: Great Plains Regional Contracting Ofc
(joshua.p.barbero@us.army.mil)
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. W81K00-11-T-0371 has been re- issued as a request for quotation (RFQ). All offer s need to be submitted by the closing date & time of Tuesday, September 20, 2011 by 1:00 PM Central Time. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-53. This acquisition is now unrestricted under NAICS code 423450, Size Standard 500. FAR provisions and clauses in this solicitation may be viewed at http://www.arnet.gov/far/. FARS clauses may be viewed at http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html This request is for a brand name Hoffman III external fixation set which will be used for an upcoming Combat extremity Surgery Course. The following medical supplies/quantities will be needed to ensure full success of the requirement: 1.Hoffman III 7MM Sanner Wrench (Brand Name) (2 EA.), 2.Hoffman III 7MM T-Wrench/05 Pin Driver (Brand Name) (2 EA.), 3.Hoffman III Thumbwheel (Brand Name) (4 EA.), 4.Hoffman III Trocar/assenbkt 4MM short (Brand Name) (4 EA.), 5.Hoffman III Trocar/assenbkt 5MM short (Brand Name) (4 EA.), 6.Hoffman III Trocar/assenbkt 6MM short (Brand Name) (4 EA.), 7.Hoffman III Drill 3.2mm for 4mm pins (Brand Name) (2 EA.), 8.Hoffman III Drill 4.0mm for 5mm pins (Brand Name) (2 EA.), 9.Hoffman III Drill 4.5mm for 6mm pins (Brand Name) (2 EA.), 10.Hoffman III Quick Release Apex Chuck, 4mm Drill 4.0mm (Brand Name) (2 EA.), 11.Hoffman III Quick Release Apex Chuck, 5mm (Brand Name) (2 EA.), 12.Hoffman III Quick Release Apex Chuck, 6mm (Brand Name) (2 EA.), 13. Hoffman III Drill guide block, 5 holes (Brand Name) (2 EA.), 14.Hoffman III Drill guide block, 10 holes (Brand Name) (2 EA.), 15.Hoffman III Drill guide handle (Brand Name) (2 EA.), 16.Hoffman III 3 Sterilization Tray (Brand Name) (2 EA.), 17.Hoffman III Connecting rod 001 X 150 mm (Brand Name) (8 EA.), 18.Hoffman III Connecting rod 001 X 150 mm (Brand Name) 19.Hoffman III Connecting rod 001 X 250 mm (Brand Name) (8 EA.), 20.Hoffman III Connecting rod 001 X 350 mm (Brand Name) (4 EA.), 21.Hoffman III Connecting rod 001 X 450 mm (Brand Name) (4 EA.), 22.Hoffman III Delta Coupling, rod to rod (Brand Name) (20 EA.), 23.Hoffman III Delta Coupling, pin to rod (Brand Name) (8 EA.), 24.Hoffman III Delta Coupling, pin to rod coupling inv (Brand Name) (4 EA.), 25.Hoffman III 5-Hole Pin Clamp (Brand Name) (16 EA.), 26.Hoffman III 10-Hole Pin Clamp (Brand Name) (4 EA.), 27.Hoffman III Straight Post 011mm (Brand Name) (8 EA.), 28.Hoffman III 30d Angled Post 011mm (Brand Name) (16 EA.), 29.Hoffman III 90d Angled Post 011mm (Brand Name) (4 EA.), 30.Hoffman III 5-Hole Pin Clamp w/ two 001 mm 30d AP (Brand Name) (4 EA.), 31.Hoffman III Apex Pins 5mmx 120mm (Brand Name) (16 EA.), 32.Hoffman III Apex Pins 5mmx 150mm (Brand Name) (16 EA.), 33.Hoffman III Apex Pins 5mmx 180mm (Brand Name) (16 EA.), 34.Hoffman III Apex Pins 5mmx 200mm (Brand Name) (16 EA.), 35.Hoffman III Apex Pins 5mm x 250mm (Brand Name) (16 EA.), 36.Hoffman III Transfixing pin 5/4mm x 250 mm (Brand Name) (4 EA.), NOTE: In accordance with addendum 52.212-1, Vendors interested in submitting an offer must furnish descriptive literature (brochures, specifications, dimensions, etc...) that confirms your offer meets the criteria of the supplies listed above. Delivery date is 30-Sept-11. Place of delivery and acceptance is: Ryder Trauma Center, University of Miami Dept. of Orthopaedics, 1611 NW 12th Ave., Rehab Center 303, Miami, FL 33136. FOB destination is preferred. CLAUSES INCORPORATED BY REFERENCE 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards JUL 2010 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment DEC 2010 52.212-1 Instructions to Offerors--Commercial Items JUN 2008 52.212-3 Alt I Offeror Representations and Certifications--Commercial Items (May 2011) Alternate I APR 2011 52.212-4 Contract Terms and Conditions--Commercial Items JUN 2010 52.222-19 Child Labor -- Cooperation with Authorities and Remedies JUL 2010 52.222-50 Combating Trafficking in Persons FEB 2009 52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 252.203-7000 Requirements Relating to Compensation of Former DoD Officials JAN 2009 252.203-7002 Requirement to Inform Employees of Whistleblower Rights JAN 2009 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.211-7003 Item Identification and Valuation JUN 2011 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports MAR 2008 252.232-7010 Levies on Contract Payments DEC 2006 CLAUSES INCORPORATED BY FULL TEXT 52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (i) Technical (ii) price; To determine best value for the government, technical is considered slightly more important than price. (a)Quotes must be submitted on time by fax to (254) 553-3906, Attn: Joshua Barbero or email: joshua.barbero@amedd.army.mil (b) Evaluation Process: All quotes will be evaluated based on lowest price technically acceptable (LPTA). The award decision will be based on the lowest technically acceptable quote. (End of provision) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (AUG 2011) (DEVIATION) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b)(1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(i) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). ___ Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JAN 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-CENTRAL CONTRACTOR REGISTRATION (OCT 2003) (a) Method of payment. (1) All payments by the Government under this contract shall be made by electronic funds transfer (EFT), except as provided in paragraph (a)(2) of this clause. As used in this clause, the term "EFT" refers to the funds transfer and may also include the payment information transfer. (2) In the event the Government is unable to release one or more payments by EFT, the Contractor agrees to either-- (i) Accept payment by check or some other mutually agreeable method of payment; or (ii) Request the Government to extend the payment due date until such time as the Government can make payment by EFT (but see paragraph (d) of this clause). (b) Contractor's EFT information. The Government shall make payment to the Contractor using the EFT information contained in the Central Contractor Registration (CCR) database. In the event that the EFT information changes, the Contractor shall be responsible for providing the updated information to the CCR database. (c) Mechanisms for EFT payment. The Government may make payment by EFT through either the Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the Fedwire Transfer System. The rules governing Federal payments through the ACH are contained in 31 CFR part 210. (d) Suspension of payment. If the Contractor's EFT information in the CCR database is incorrect, then the Government need not make payment to the Contractor under this contract until correct EFT information is entered into the CCR database; and any invoice or contract financing request shall be deemed not to be a proper invoice for the purpose of prompt payment under this contract. The prompt payment terms of the contract regarding notice of an improper invoice and delays in accrual of interest penalties apply. (e) Liability for uncompleted or erroneous transfers. (1) If an uncompleted or erroneous transfer occurs because the Government used the Contractor's EFT information incorrectly, the Government remains responsible for-- (i) Making a correct payment; (ii) Paying any prompt payment penalty due; and (iii) Recovering any erroneously directed funds. (2) If an uncompleted or erroneous transfer occurs because the Contractor's EFT information was incorrect, or was revised within 30 days of Government release of the EFT payment transaction instruction to the Federal Reserve System, and-- (i) If the funds are no longer under the control of the payment office, the Government is deemed to have made payment and the Contractor is responsible for recovery of any erroneously directed funds; or (ii) If the funds remain under the control of the payment office, the Government shall not make payment, and the provisions of paragraph (d) of this clause shall apply. (f) EFT and prompt payment. A payment shall be deemed to have been made in a timely manner in accordance with the prompt payment terms of this contract if, in the EFT payment transaction instruction released to the Federal Reserve System, the date specified for settlement of the payment is on or before the prompt payment due date, provided the specified payment date is a valid date under the rules of the Federal Reserve System. (g) EFT and assignment of claims. If the Contractor assigns the proceeds of this contract as provided for in the assignment of claims terms of this contract, the Contractor shall require as a condition of any such assignment, that the assignee shall register separately in the CCR database and shall be paid by EFT in accordance with the terms of this clause. Notwithstanding any other requirement of this contract, payment to an ultimate recipient other than the Contractor, or a financial institution properly recognized under an assignment of claims pursuant to subpart 32.8, is not permitted. In all respects, the requirements of this clause shall apply to the assignee as if it were the Contractor. EFT information that shows the ultimate recipient of the transfer to be other than the Contractor, in the absence of a proper assignment of claims acceptable to the Government, is incorrect EFT information within the meaning of paragraph (d) of this clause. (h) Liability for change of EFT information by financial agent. The Government is not liable for errors resulting from changes to EFT information made by the Contractor's financial agent. (i) Payment information. The payment or disbursing office shall forward to the Contractor available payment information that is suitable for transmission as of the date of release of the EFT instruction to the Federal Reserve System. The Government may request the Contractor to designate a desired format and method(s) for delivery of payment information from a list of formats and methods the payment office is capable of executing. However, the Government does not guarantee that any particular format or method of delivery is available at any particular payment office and retains the latitude to use the format and delivery method most convenient to the Government. If the Government makes payment by check in accordance with paragraph (a) of this clause, the Government shall mail the payment information to the remittance address contained in the CCR database. (End of Clause) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/far/index.html (End of provision 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/far/index.html (End of clause) 52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984) (a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the provision. (b) The use in this solicitation of any DoD FAR Supplement (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of provision) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any DoD FAR Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (DEC 2010) (DEVIATION) (a) In addition to the clauses listed in paragraph (b) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5) (OCT 2010) (DEVIATION), the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: 252.237-7010 252.237-7019Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). 252.247-7003Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (JUL 2009) (Section 884 of Public Law 110-417) 252.247-7023Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631) 252.247-7024Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631) (End of clause) WIDE AREA WORKFLOW (WAWF) ARMY ELECTRONIC INVOICING INSTRUCTIONS Electronic Submission of Payment Request Contractor shall submit payment request using the following method as mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office. _X_ Wide Area Workflow -Receipt and Acceptance (WAWF-RA) (see instructions below) ___ Web Invoicing System (WInS) ___ American National Standards Institute (ANSI) X.12 electronic data interchange (EDI) formats ___ Other (please specify)____________________________________ DFAS POC and Phone:_______________________________________________ WAWF-RA is the method to electronically process vendor request for payment. This application allows DOD vendors to submit and track Invoices and Receipt/Acceptance documents electronically. Contractor electing to use WAWF-RA shall (i) register to use WAWF-RA at https://wawf.eb.mil and (ii) ensure an electronic business point of contract (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract/order. WAWF- RA Instructions Questions concerning payments should be directed to the Defense Finance and Accounting Service (DFAS)[fill in DFAS location here](Block 18a of your purchase order/contract) at [fill in DFAS vendor pay phone number here] or faxed to [fill in DFAS vendor pay fax phone number here]. Please have your purchase order/contract number ready when calling about payments. You can easily access payment and receipt information using the DFAS web site at http://www.dfas.mil/money/vendor. Your purchase order/contract number or invoice number will be required to inquire status of your payment. The following codes and information will be required to assure successful flow of WAWF-RA documents. TYPE OF DOCUMENT[X the appropriate block] ___ Commercial Item Financing ___ Construction Invoice (Contractor Only) ___ Invoice (Contractor Only) _X__ Invoice and Receiving Report (COMBO) ___ Invoice as 2-in-1 (Services Only) ___ Performance Based Payment (Government Only) ___ Progress Payment (Government Only) ___ Cost Voucher (Government Only) ___ Receiving Report (Government Only) ___ Receiving Report With UID Data (Government Only) ___ Summary Cost Voucher (Government Only) CAGE CODE: ISSUE BY DODAAC: W81K00 ADMIN BY DODAAC: W81K00 INSPECT BY DODAAC: W45MW2 ACCEPT BY DODAAC: W45MW2 SHIP TO DODAAC: W45MW2 LOCAL PROCESSING OFFICE DODDAC: N/A PAYMENT OFFICE FISCAL STATION CODE: 021001 EMAIL POINTS OF CONTACT LISTING: INSPECTOR: ACCEPTOR: RECEIVING OFFICE POC: CONTRACT ADMINISTRATOR: joshua.barbero@amedd.army.mil CONTRACTING OFFICER: anamaria.boner@amedd.army.mil ADDITIONAL CONTACT: See Above (End of clause) ADDENDUM TO 52.212-4 (u) The non-FAR Part 12 discretionary FAR, DFARS, AFARS, and LOCAL clauses included herein are incorporated into this contract either by reference or in full text. If incorporated by reference, see clause 52.252-2 herein for locations where full text can be found. ADDENDUM TO 52.212-1 Vendors interested in submitting an offer must furnish descriptive literature (brochures, specifications, dimensions, etc...) that confirms your offer meets criteria of the supplies listed above. Inability to do so will result in your quote being disqualified. In accordance with FAR 52.212-3 ALT I, an offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (i) of this provision. Inability to register your representation and certifications via ORCA or provide manual represenation & certifcation (see FAR 52.252-1) will result in your quote being disqualified. (m) The non-FAR Part 12 discretionary FAR, DFARS, AFARS, and LOCAL provisions included herein are incorporated into this solicitation either by reference or in full text. If incorporated by reference, see provision 52.252-1 herein for locations where full text can be found.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USA/MEDCOM/DADA09/W81K0011T0371/listing.html)
Place of Performance: Address: Great Plains Regional Contracting Ofc ATTN: MCAA GP L31 9V, 3851 Roger Brooke Drive Fort Sam Houston TX; Zip Code: 78234-6200
Record: SN02579767-W 20110918/110916235417-6338b330f6718562eea1ca5c8e97be7d (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

65 -- Medical Supplies needed for an upcoming Combat Extremity Surgery Course