MODIFICATION
C -- MODIFICATION TO IDIQ AE CONTRACT FOR GEOTECHNICAL AND CONSTRUCTION MATERIAL SAMPLING, TESTING, SURVEYING, ANALYSIS AND DESIGN FOR MILITARY, CIVIL OR ENVIRONMENTAL PROJECTS LOCATED WITHIN THE SOUTHWESTERN DIVISION (SWD) BOUNDARIES
- Notice Date
- 10/5/2011
- Notice Type
- Modification/Amendment
- Contracting Office
- USACE District, Tulsa, ATTN: CESWT-CT, 1645 South 101st East Avenue, Tulsa, OK 74128-4609
- ZIP Code
- 74128-4609
- Solicitation Number
- W912BV-11-R-0075
- Response Due
- 10/25/2011
- Archive Date
- 12/24/2011
- Point of Contact
- Diane Cianci, 918-669-7458
- E-Mail Address
-
USACE District, Tulsa
(diane.cianci@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The following are changes as a result of questions: 1. Boring logs and drawings shall be furnished in a CADD format which is fully compatible with the Microstation CADD software (Version V8 or later); in addition.pdf files and hard copies of all submittals shall be provided. The Contractor may be required to produce cost estimates using Corps of Engineers Computer Aided Cost Estimating System (M-CACES Gold, software provided, latest version), prepare specifications using SPECSINTACT Software, and GIS files for input to ESRI graphic systems. Replace this paragraph with the following: "Boring logs and drawings shall be furnished in a CADD format which is fully compatible with the Microstation CADD software (Version V8 or later); in addition.pdf files and hard copies of all submittals shall be provided." 2. (b) Capacity (personnel and equipment) to accomplish work in the required time. The firm must demonstrate ca-pacity to handle two (2) simultaneous task orders of varying type and location. The firm should demonstrate ability to provide the following minimum personnel to perform work: two (2) soils lab technicians; two (2) geotechnical design engineers; one (1) engineering technician; one (1) CADD draft person ; one (1) 2-person survey crew; and one (1) drill crew. Firm must demonstrate capacity to produce CADD drawings which are fully compatible with the Microstation CADD software, Version V8 or later. Firm must be able to provide the following minimum equipment to be utilized for the project: one (1) core drill rig with off road access capability; one (1) wireline type drill rig; and one (1) drill rig Failing 1500 or equivalent with a minimum 200-ft depth capability of collecting undisturbed samples. The firm shall demonstrate ability to meet the minimum requirements of paragraph 3b as indicated in solicitation and as shown above.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA56/W912BV-11-R-0075/listing.html)
- Place of Performance
- Address: USACE District, Tulsa ATTN: CECT-SWT-E, 1645 South 101st East Avenue Tulsa OK
- Zip Code: 74128-4609
- Zip Code: 74128-4609
- Record
- SN02603112-W 20111007/111005234921-dda9b98794eed2e40c6b9054bbb4b276 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |