PRESOL | 51 | Common Hand Tool Kits

FBO DAILY ISSUE OF OCTOBER 27, 2011 FBO #3624
SOLICITATION NOTICE

51 -- Common Hand Tool Kits

Notice Date: 10/25/2011
Notice Type: Combined Synopsis/Solicitation
NAICS: 332212 — Hand and Edge Tool Manufacturing
Contracting Office: Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department, Hwy. 547 Attn:B562-3C, Lakehurst, New Jersey, 08733-5083
ZIP Code: 08733-5083
Solicitation Number: N68335-12-T-0003
Archive Date: 11/29/2011
Point of Contact: Deborah L Dewyea, Phone: 732-323-7068
E-Mail Address: deborah.dewyea@navy.mil
(deborah.dewyea@navy.mil)
Small Business Set-Aside: Total Small Business
Description: The Naval Air Warfare Center Aircraft Division, Lakehurst, NJ 08733 is looking to procure the following: Vendor Vendor Part Number Nomenclature Qty Comments United Drill Bushing Corp (52369) UCC-218903-10 Piloted Reamer 10.161-.164 Cut Diameter,.127 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-1 Piloted Reamer 10.164-.167 Cut Diameter,.127 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-11 Piloted Reamer 10.165-.168 Cut Diameter,.127 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-12 Piloted Reamer 10.180-.183 Cut Diameter,.164 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-13 Piloted Reamer 10.187-.190 Cut Diameter,.154 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-14 Piloted Reamer 10.187-.190 Cut Diameter,.161 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-2 Piloted Reamer 10.190-.193 Cut Diameter,.154 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-39 Piloted Reamer 10.199-.202 Cut Diameter,.154 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-15 Piloted Reamer 10.200-.203 Cut Diameter,.1875 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-3 Piloted Reamer 10.203-.206 Cut Diameter,.190 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-16 Piloted Reamer 10.215-.218 Cut Diameter,.198 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-17 Piloted Reamer 10.216-.219 Cut Diameter,.200 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-4 Piloted Reamer 10.218-.221 Cut Diameter,.203 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-18 Piloted Reamer 10.228-.231 Cut Diameter,.194 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-40 Piloted Reamer 10.238 Cut Diameter,.217 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-41 Piloted Reamer 10.240 Cut Diameter,.218 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-19 Piloted Reamer 10.247-.250 Cut Diameter,.217 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-6 Piloted Reamer 10.250-.253 Cut Diameter,.238 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-42 Piloted Reamer 10.255 Cut Diameter,.217 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-43 Piloted Reamer 10.257 Cut Diameter,.239 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-20 Piloted Reamer 10.260-.263 Cut Diameter,.217 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-44 Piloted Reamer 10.261 Cut Diameter,.234 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-21 Piloted Reamer 10.261-.264 Cut Diameter,.245 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-45 Piloted Reamer 10.262 Cut Diameter,.234 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-22 Piloted Reamer 10.263-.266 Cut Diameter,.248 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-8 Piloted Reamer 10.265-.268 Cut Diameter,.250 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-46 Piloted Reamer 10.270 Cut Diameter,.255 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-47 Piloted Reamer 10.272 Cut Diameter,.256 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-23 Piloted Reamer 10.276-.279 Cut Diameter,.260 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-24 Piloted Reamer 10.278-.281 Cut Diameter,.264 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-9 Piloted Reamer 10.281-.284 Cut Diameter,.266 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-25 Piloted Reamer 10.290-.293 Cut Diameter,.259 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-48 Piloted Reamer 10.2905 Cut Diameter,.256 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-26 Piloted Reamer 10.309-.313 Cut Diameter,.280 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-27 Piloted Reamer 10.312-.315 Cut Diameter,.280 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-49 Piloted Reamer 10.324 Cut Diameter,.290 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length (MINI-MARK IV) United Drill Bushing Corp (52369) UCC-218903-28 Piloted Reamer 10.325-.328 Cut Diameter,.309 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-29 Piloted Reamer 10.328-.331 Cut Diameter,.312 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-30 Piloted Reamer 10.341-.344 Cut Diameter,.325 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-31 Piloted Reamer 10.343-346 Cut Diameter,.328 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-32 Piloted Reamer 10.371-.375 Cut Diameter,.342 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-33 Piloted Reamer 10.374-.377 Cut Diameter,.342 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-34 Piloted Reamer 10.375-.378 Cut Diameter,.342 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-35 Piloted Reamer 10.388-.391 Cut Diameter,.371 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-36 Piloted Reamer 10.390-.393 Cut Diameter,.375 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-37 Piloted Reamer 10.403-.406 Cut Diameter,.388 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length United Drill Bushing Corp (52369) UCC-218903-38 Piloted Reamer 10.406-.409 Cut Diameter,.391 Pilot Diameter,.75 Pilot Length, 6.0 Overall Length, Solid Carbide, Straight Shank, Right-Hand Cutting with 4 Flutes, 2.0 In Flute Length Quality Carbide Tool Corp (070Q8) ST1257B-0980-400-1 ST1257B Drill 5.0980 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-0980-600-1 ST1257B Drill 5.0980 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-0980-250-2-428 ST1257B Drill 5.0980 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-1285-400-1 ST1257B Drill 5.1285 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1285-600-1 ST1257B Drill 5.1285 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1285-250-2-428 ST1257B Drill 5.1285 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-1640-400-1 ST1257B Drill 5.1640 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1640-600-1 ST1257B Drill 5.1640 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1640-250-2-428 ST1257B Drill 5.1640 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-1660-600-1 ST1257B Drill 5.1660 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1660-250-2-428 ST1257B Drill 5.1660 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-1900-400-1 ST1257B Drill 5.1900 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1900-600-1 ST1257B Drill 5.1900 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1900-250-2-428 ST1257B Drill 5.1900 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-1930-600-1 ST1257B Drill 5.1930 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1995-400-1 ST1257B Drill 5.1995 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257-1995-600-1 ST1257B Drill 5.1995 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-1995-250-2-428 ST1257B Drill 5.1995 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-2015-600-1 ST1257B Drill 5.2015 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2285-400-1 ST1257B Drill 5.2285 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2285-600-1 ST1257B Drill 5.2285 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2285-250-2-428 ST1257B Drill 5.2285 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-2380-600-1 ST1257B Drill 5.2380 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2402-600-1 ST1257B Drill 5.2402 Diameter, 6.0 In Long, Plain Shank (MINI MARK IV) Quality Carbide Tool Corp (070Q8) ST1257B-2500-400-1 ST1257B Drill 5.2500 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2500-600-1 ST1257B Drill 5.2500 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2500-250-2-428 ST1257B Drill 5.2500 Diameter, 2.5 In Long, 1/4-28 Threaded Shank Quality Carbide Tool Corp (070Q8) ST1257B-2570-600-1 ST1257B Drill 5.2570 Diameter, 6.0 In Long, Plain Shank (MINI MARK IV) Quality Carbide Tool Corp (070Q8) ST1257B-2605-400-1 ST1257B Drill 5.2605 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2605-600-1 ST1257B Drill 5.2605 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2610-600-1 ST1257B Drill 5.2610 Diameter, 6.0 In Long, Plain Shank (MINI MARK IV) Quality Carbide Tool Corp (070Q8) ST1257B-2720-600-1 ST1257B Drill 5.2720 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2905-400-1 ST1257B Drill 5.2905 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-2905-600-1 ST1257B Drill 5.2905 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-3120-400-1 ST1257B Drill 5.3120 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-3120-600-1 ST1257B Drill 5.3120 Diameter, 6.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-3750-400-1 ST1257B Drill 5.3750 Diameter, 4.0 In Long, Plain Shank Quality Carbide Tool Corp (070Q8) ST1257B-3750-600-1 ST1257B Drill 5.3750 Diameter, 6.0 In Long, Plain Shank If there are shipping charges, provide them on a separate line item. This is a combined synopsis/solicitation; this announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. This requirement is 100% Set Aside for Small Business. All vendors must be registered in the Central Contract Registration (CCR) Database. The internet website is http://www.ccr.dlsc.dla.mil/ccringq or www.ccr.gov. It is mandatory to register with the CCR as your Duns Number(Data Universal Numbering System) and your CAGE (Commercial and Government Entity) code will be required to conduct business with the Department of Defense. In addition, all invoices will be electronically submitted in the Wide Area Work Flow(WAWF); information available in DFAR Clause 252.232-7003. Additional information required: Cage Code, Duns Number, Tax ID Number, Payment Terms, Delivery schedule, Delivery charges if applicable, GSA contract number if applicable, Business size, and Email address. All responses will be made to Debbie Dewyea at fax 732-323-7192 or email: deborah.dewyea@navy.mil. All responsible sources may submit a quotation which, if received in a timely manner, shall be considered by the agency. Closing date is 14 November 2011.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N68335-12-T-0003/listing.html)
Place of Performance: Address: Naval Air Warfare Center, Aircraft Division, Lakehurst, New Jersey, 08733, United States; Zip Code: 08733
Record: SN02612814-W 20111027/111025234632-b792a4eea8d30395c587f97d4d3bfdf9 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

51 -- Common Hand Tool Kits