MODIFICATION
28 -- SEAL,METALLIC,AIRCR
- Notice Date
- 11/2/2011
- Notice Type
- Modification/Amendment
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DEFENSE LOGISTICS AGENCY; DLR PROCUREMENT OPS DSCR-ZBA;3001STAFF DRIVE; TINKER AFB; OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- SPRTA1-12-Q-0034
- Response Due
- 10/18/2011
- Archive Date
- 12/31/2012
- Point of Contact
- Rhonda L White, Phone: 4057348115
- E-Mail Address
-
rhonda.L.white@tinker.af.mil
(rhonda.L.white@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20301270294Item: 0001NSN: 2840014369105NZ SEAL,METALLIC,AIRCRP/N: 4082667-01, Description: Coonvergent Seal (-229) APPROX 20.6 IN. LENGTH X 4.5 INWIDTH X 0.5 IN THK. THE CONVERGENT SEALS LIMIT THE AMOUNT OF EXHAUSTGAS PRESSURE ESCAPING BETWEEN THE NOZZLE SEGMENT. THE SEALS ALSO HAVE AHEAT RESISTANT COATING THAT PROTECT THE CONVERGENT SEGMENTS FROM HIGHEXHAUST GAS TEMPERATURES.From Quantity: 17.0000 EA Destn: SW3211,TINKER AFB,OK,73145-8000. Delivery: 03 DEC 2012 On or Before, 66.00 EA PR Number(s): FD20301270294Item: 0002DATA IAW DD FORM 1423, ATTACHED HERETO Description: Quantity: 1.0000 LO Destn: FA8111,TINKER AFB,OK,73145-3041. Delivery: TBD To be determined, 1.00 LO PR Number(s): FD20301270294Item: 0003NSN: 2840014369105NZ SEAL,METALLIC,AIRCRP/N: 4082667-01, Description: Coonvergent Seal (-229) APPROX 20.6 IN. LENGTH X 4.5 INWIDTH X 0.5 IN THK. THE CONVERGENT SEALS LIMIT THE AMOUNT OF EXHAUSTGAS PRESSURE ESCAPING BETWEEN THE NOZZLE SEGMENT. THE SEALS ALSO HAVE AHEAT RESISTANT COATING THAT PROTECT THE CONVERGENT SEGMENTS FROM HIGHEXHAUST GAS TEMPERATURES.Quantity: 1.0000 EA Destn: PLANT,,,. Delivery: TBD To be determined, 1.00 EA Written response is requiredAnticipated Award Date: 31DEC2012 Duration of Contract Period: 31 Dec 2012 Electronic procedure will be used for this solicitation. To: UNITED TECHNOLOGIES CORPORATION, EAST HARTFORD, CT.,06108-0968. To:UNITED TECHNOLOGIES CORPORATION, EAST HARTFORD, CT.,06108-0968. To:UNITED TECHNOLOGIES CORPORATION, EAST HARTFORD, CT.,06108-0968. SynopsisFD2030-12-70294 AMC: 1/C 1. Estimated issue date 2 Nov 2011 and estimated closing/responsedate 2 Dec 11. 2. RFP #: SPRTA1-12-Q-0034 3. PR#: FD2030-12-70294 4. Nomenclature/Noun: SEAL, METALLIC, AIRCRAFT 5. NSN: 2840-01-436-9105NZ 6. P/N: 4082667-01 7. Application (Engine or Aircraft): F100/229 Engine 8. AMC: 1/C 9. History: Previously purchased 364 each from United TechnologiesCorp on contract SPRTA1-09-G-0001-0230 on 16 Feb 2011 and 15 each fromUnited Technologies Corp on contract SPRTA1-09-G-0001-0065 on 27 April2009. 10. Description/Function: Seal protects convergent nozzle segmentfrom high exhaust gas temperatures. 11. Dimensions: Approximately 27.0000 inches in length, 10.0000inches in width and 9.0000 inches in height and 7.0000 lbs in weight. 12. Material: ams 5596 nickel alloy. 13. Qualified Sources: United Technologies Corp, Pratt & WhitneyMilitary Engines Business, Cage Code 52661; and AGC Incorporated, CageCode 98500. 14. Qualification requirements are applicable. 15. First Article is not required for the original equipmentmanufacturer. 16. Export Control applies Required Delivery: 66 each on or before 31 December 2012. Destination: USAF 17. Mandatory Language: Written procedures will be used for this solicitation. Authority: 10U.S.C. 2304(c) (1), Justification: supplies (or Services) required areavailable from only or a limited number of responsible sources(s) and noother type of supplies or services will satisfy agency requirements.The proposed contract action is for supplies and services for which theGovernment intends to solicit and negotiate with only one, or a limitednumber of sources under the authority of FAR 6.302. The solicitationwill identify the office where additional information can be obtainedconcerning qualifications requirements as cited in each individualsolicitation. Note: An Ombudsman has been appointed to hear concernsfrom offerors or potential offerors during the proposal developmentphase of this acquisition. The purpose of the Ombudsman is not todiminish the authority of the program director or contracting officer,but to communicate contractor concerns, issues, disagreements, andrecommendations to the appropriate government personnel. Whenrequested, the Ombudsman will maintain strict confidentiality as tosource of the concern. The Ombudsman does not participate in theevaluation of proposals or in the source selection process. Interestedparties are invited to call Ombudsman at (405) 736-8253. DO NOT CALLTHIS NUMBER FOR SOLICITATION REQUESTS. For qualificationinformation/source approval request contact the buyer listed below at(405)734-8115 or Rhonda.L.white@tinker.af.mil. Note: Faxed solicitationrequests can be submitted to DLA DSCR-ZBAB, Tinker AFB, OK 73145, FAXNUMBER (405) 734-8106. 18. UID: If unit price exceeds $5,000.00 then UID requirements willapply. 19. This procurement is not a total Small Business Set Aside
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/SPRTA1-12-Q-0034/listing.html)
- Record
- SN02616598-W 20111104/111102234236-7afaf0f647d32606e2742bbcad151ea0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |