SOURCES SOUGHT
C -- Architect and General Engineering Services
- Notice Date
- 12/8/2011
- Notice Type
- Sources Sought
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Philadelphia, 100 Penn Square East, Wanamaker Bldg (RM 643), Philadelphia, Pennsylvania, 19107-3390, United States
- ZIP Code
- 19107-3390
- Solicitation Number
- W912BU-12-R-0008
- Point of Contact
- Sandra G Fletcher, Phone: 215-656-6915, Joseph T Bujnowski, Phone: 215-656-6761
- E-Mail Address
-
Sandra.G.Fletcher@usace.army.mil, Joseph.T.Bujnowski@usace.army.mil
(Sandra.G.Fletcher@usace.army.mil, Joseph.T.Bujnowski@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- DESC: 1. CONTRACT INFORMATION: The Philadelphia District, U.S. Army Corps of Engineers intends to award up to two (2) Indefinite Delivery Contracts for Architectural and General Engineering Services. Each contract will be for a base period with options for up to four (4) additional periods. A contract period shall not exceed 12 months. The maximum task order is not expected to exceed $1,000,000.00. The cumulative amount of all task orders is estimated to be about $1,000,000.00 in either the base or any of the option periods. The cumulative total for the base and the option periods shall not exceed $5,000,000.00. An option will be awarded at the discretion of the Contracting Officer based on reaching the value limit first and then reaching the time limit. 2. Project Information: The selected firm will be used primarily for Architectural and General Engineering type services. The work under these contracts will primarily be in support of Military Installations, but may include Civil Works, Work for Others Program, and/or other missions assigned to the Philadelphia District. Most work will be within the Philadelphia District boundaries. Those boundaries include portions of the States of Pennsylvania, New Jersey, New York, Maryland, and Delaware. Work may be required outside of these boundaries. Primary work under this contract will involve but not be limited to; the design for construction, renovation and/or alteration to institutional, industrial, commercial, residential, and recreational type facilities. Secondary work will include the design for the repair and maintenance to institutional, industrial, commercial, residential, and recreational type facilities. Types of related work includes but is not limited to highway, other paved surfaces, electrical power and other utility systems, site work, interior design, and landscaping and shall be a part of both the primary and secondary work. Both primary and secondary work shall include: architectural, civil, structural, mechanical, direct digital controls (DDC), electrical, fire protection, sanitary, geotechnical, interior design, storm water management, security, support during construction, landscape design, LEED and enhanced commissioning support. Other work shall include Anti-Terrorism/Force Protection, historic preservation, life safety analysis, Americans with Disabilities Act (ADA) conformance, economic and life cycle cost analysis, planning, site investigations, design analysis, energy analysis, claims analysis, schedule preparation, surveying, GIS support, studies, reports, and expert witness efforts. The third level of work under this contract shall include but not be limited to: preparation of concept, preliminary and detailed designs for the removal/remediation/abatement/restoration of facilities and/or areas with environmental hazards including soil and groundwater, lead paint, asbestos, PCB's, and other contaminated wastes. Professional qualifications in the Primary and Secondary areas shall include but not be limited to: architect, mechanical, electrical, engineering/project management, power qualified engineers, interior designer, fire protection engineer, structural, civil, highway engineers, hydrology, structural, geotechnical, landscape architect, LEED AP, enhanced commissioning support, surveyor, specification writer and cost estimator for these efforts. Technical support, including drawing production, and other related efforts shall be required. Professional qualification for the third level work shall include but not be limited to: environmental engineer, environmental scientist, certified industrial hygienist, biologist, geologist, chemist, and hydraulic engineering. Technical support, including drawing production, graphics, and other related efforts shall be required. Responding firms shall have experience and indicate their qualification with the following: the automated Document Review and Checking System (Dr. Checks); the Corps of Engineers M-CACES 2 nd Generation (MII) cost estimating system; the U. S. Army Corps of Engineers Computerized Specifications (SPECSINTACT); the production of drawings and graphic data in AutoCAD and Micro Station systems of computer aided drafting and design system (CADD); and the development and use of Building Information Models (BIM). The Contractor shall adhere to the Tri-Service Spatial Data Standards. The firms must be qualified in the work areas described and be familiar with the requirements and regulations of the U.S. Army Corps of Engineers, Air Force, Army, Building Codes (IBC, State, and Local), EPA, and other agencies which have jurisdiction. Codes shall be those enforced at the time of award. Responses to this SOURCES SOUGHT announcement will be used by the government to make appropriate acquisition decisions. All interested Small Business, HUBZone, 8(a), or Service Disabled Veteran Owned Business contractors should submit a narrative demonstrating their experience in similar type contracts. Capability statements should include size/classification of your firm, details of similar projects, completion dates, references and contract amount. Narratives shall be no longer than FIVE (5) pages. Responses should be sent to Sandi Fletcher at Sandra.G.Fletcher@usace.army.mil to reach this office on or before December 15, 2011.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA61/W912BU-12-R-0008/listing.html)
- Place of Performance
- Address: Wanamaker Building, 100 Penn Square East, Philadelphia, Pennsylvania, 19107, United States
- Zip Code: 19107
- Zip Code: 19107
- Record
- SN02635627-W 20111210/111208234003-1acae935d321dd17c55a2e56ffe9dbd1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |