SOLICITATION NOTICE
20 -- 15K-20K Main Engine Overhaul Kits
- Notice Date
- 12/14/2011
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333618
— Other Engine Equipment Manufacturing
- Contracting Office
- N40442 MSFSC NORFOLK Building SP-64 471 C Street Norfolk, VA
- ZIP Code
- 00000
- Solicitation Number
- N4044212T3012
- Response Due
- 12/22/2011
- Archive Date
- 1/23/2012
- Point of Contact
- Doug Jones 757-443-5882 Ricky Jennings
- E-Mail Address
-
3-5961
- Small Business Set-Aside
- N/A
- Description
- Military Sealift Fleet Support Command (MSFSC), Naval Station Norfolk, VA intends to award a sole source firm-fixed price purchase order to FME for the following notice: This is a combined synopsis / solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation Number: N40442-12-T-3012 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular FAC 2005-53, effective August 4, 2011 NAICS Code 333618 applies. Test Program for Commercial Items: This requirement will be awarded using the procedures under FAR Part 13.5 Test Program for Commercial Items of the Clinger-Cohen Act of 1996. The following FAR Part 13 Simplified Acquisition Procedures shall be used: Quotes shall be solicited and a purchase order issued to the successful offer who submits the lowest price. Award will be made for all parts. FAR Part 13 Purchase Order procedures shall supersede any contrary procedures set forth or incorporated by reference in this solicitation. CLIN 0001: 8L ENGINE: Vessel:USNS Alan Shepard Engine:Man 8L48/60Ser 939872R8L1 QtyPart NumberDescription Rocker Arm/Rocker Arm Housing 8K06.56409-0032 00 O-ring (Rocker arm cover) 2K06.56936-2775 00O-ring 2F11.11199-0021 00Spacer ring 1K06.56190-0712 00Sealing ring Cylinder Head 8X11.05087-0353 00Sealing ring (head/fire ring) 8K06.56936-5765 00O-ring (top) 16K06.56933-5817 00O-ring (Bottom ) 8K06.56936-5014 00O-ring (Air side) 16K06.56936-3498 00O-ring (push rod /top) 16K06.56936-3490 00O-ring (push rod guide tube/top 16K06.56936-3288 00 O-ring (push rod-guide tube/lower 48K06.56936-2775 00O-ring (Injector) 8F1l.22187-0053 00 Sealing ring (Injector) 8X11.22107-1535 00Injector Nozzle 64K06.56936-2416 00O-ring (Cooling water/Starting air pipe) 8K06.56936-5167 00O-ring (Air mainfold/cyl.head) 8K06.56936-2775 00O-ring (High pressure inj. Pipe) Fire Landing Ring/Piston Connecting Rod Bearing/Main Bearing 16K06.56933-5816 00O-ring (Fire landing ring) 8E11.03456-1534 00Compression ring (Piston) 16E11.03456.1198 00Compression ring (Piston) 8X11.03431.0203 00Oil Control ring (Piston) 1K06.56936-5391 00O-ring seal 6K06.56936-2775 00O-ring (Side bolt) Fuel Injection Pump 1K06.56930-4184 00O-ring seal 4K06.56938-1217 00 O-ring seal (Fuel pipe) 4K06.56936-2778 00O-ring seal (Fuel pipe) 1K06.56936-2775 00O-ring seal 1K06.56686-0420 00Sealing ring 1K06.56936-1386 00O-ring seal 1K06.56269-0606 00 Shaft Seal 2K06.56190-0739 00Sealing ring 2F11.20094-0215 00Baffle screw 1F11.20087-0093 00Seal 1F11.20087-0094 00Seal Crank Case Door 16K06.56409-0033 00Sealing Ring (Crank Case Door) 8F11.07387-2056 00O-ring Seal (For Relief Valve) Buffer Piston 2F11.43487-0037 00Seal (Gasket) 2K06.56190-0714 00Sealing ring 2X11.43487-0016 00 Set of piston sealing ring 2K06.56936-3167 00Round seal ring (O-ring) 2K06.56500-0139 00Sealing ring 2K06.56190-0718 00Sealing ring (A22x27 DIN 7603 Cu) Charge Air Cooler and Attachment 1X11.32287.2183.00Set of seals 1K06.56425-0407.00Seal 1K06.56425-0109.00Seal Main Starting Air Valves 1K06.56190-0719 00Sealing ring 2F06.56539-0076 00Sealing ring 1K06.56200-0707 00Sealing ring 1F06.56539-0072 00Sealing ring 1K06.56510-0112 00Sealing ring Other/Tools 2MNA08573810460Honing Stone Set (one Set 8 Pc's) 15K-20K Overhaul Kit Number: M12702080 9L ENGINE: Vessel:USNS Alan Shepard Engine:Man 9L48/60Ser 939872R9L1 and 939872R9L1 QtyPart NumberDescription Rocker Arm/Rocker Arm Housing 18K06.56409-0032 00 O-ring (Rocker arm cover) 4K06.56936-2775 00O-ring 4F11.11199-0021 00Spacer ring 2K06.56190-0712 00Sealing ring Cylinder Head 18X11.05087-0353 00Sealing ring (head/fire ring) 18K06.56936-5765 00O-ring (top) 36K06.56933-5817 00O-ring (Bottom ) 18K06.56936-5014 00O-ring (Air side) 36K06.56936-3498 00O-ring (push rod /top) 36K06.56936-3490 00O-ring (push rod guide tube/top 36K06.56936-3288 00 O-ring (push rod-guide tube/lower 126K06.56936-2775 00O-ring (Injector) 18F1l.22187-0053 00 Sealing ring (Injector) 18X11.22107-1535 00Injector Nozzle 144K06.56936-2416 00O-ring (Cooling water/Starting air pipe) 18K06.56936-5167 00O-ring (Air mainfold/cyl.head) 18K06.56936-2775 00O-ring (High pressure inj. Pipe) Fire Landing Ring/Piston Connecting Rod Bearing/Main Bearing 36K06.56933-5816 00O-ring (Fire landing ring) 18E11.03456-1534 00Compression ring (Piston) 36E11.03456.1198 00Compression ring (Piston) 18X11.03431.0203 00Oil Control ring (Piston) 2K06.56936-5391 00O-ring seal 12K06.56936-2775 00O-ring (Side bolt) Fuel Injection Pump 2K06.56930-4184 00O-ring seal 8K06.56938-1217 00 O-ring seal (Fuel pipe) 8K06.56936-2778 00O-ring seal (Fuel pipe) 2K06.56936-2775 00O-ring seal 2K06.56686-0420 00Sealing ring 2K06.56936-1386 00O-ring seal 2K06.56269-0606 00 Shaft Seal 4K06.56190-0739 00Sealing ring 4F11.20094-0215 00Baffle screw 2F11.20087-0093 00Seal 2F11.20087-0094 00Seal Crank Case Door 36K06.56409-0033 00Sealing Ring (Crank Case Door) 18F11.07387-2056 00O-ring Seal (For Relief Valve) Buffer Piston 4F11.43487-0037 00Seal (Gasket) 4K06.56190-0714 00Sealing ring 4X11.43487-0016 00 Set of piston sealing ring 4K06.56936-3167 00Round seal ring (O-ring) 4K06.56500-0139 00Sealing ring 4K06.56190-0718 00Sealing ring (A22x27 DIN 7603 Cu) Charge Air Cooler and Attachment 2X11.32287.2183.00Set of seals 2K06.56425-0407.00Seal 2K06.56425-0109.00Seal Main Startng Air Valves 2K06.56190-0719 00Sealing ring 4F06.56539-0076 00Sealing ring 2K06.56200-0707 00Sealing ring 2F06.56539-0072 00Sealing ring 2K06.56510-0112 00Sealing ring Other/Tools 4MNA08573810460Honing Stone Set (one Set 8 Pc's) 15K-20K Overhaul Kit Number: M12702081 1. IMPORTANT PACKAGING AND SHIPPING REQUIREMENTS: - The order shall come in two separate packages. One marked for the 8L engine the other marked for the 9L engine. - Inside of each engine type packages, there shall be separate packages dividing each of the parts sub categories. For example: inside the package for the 8L engine there shall be a box labeled " Rocker Arm/Rocker Arm Housing". Inside of that package there shall be: -A package of K06.56409-0032 00 O-ring (Rocker arm cover) K06.56936-2775 00O-ring F11.11199-0021 00Spacer ring K06.56190-0712 00Sealing ring -All parts shall be packaged with their part numbers visible. IMPORTANT IMO REQUIREMENTS: -All parts that require to be IMO certified for IAPP shall be noted and the parts listed in the PPD The required delivery date for all items listed above is 02 March 2011. The delivery address is: MSC BATS WAREHOUSE 9284 Balboa Avenue San Diego, CA 92123 M/F: USNS ALAN SHEPARD N2319312864306 Wood Packaging Material (WPM) Additional Delivery Instructions: In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved "DUNNAGE" stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The following FAR provisions and clauses apply to this solicitation and are hereby incorporated: 52.204-7Central Contractor Registration 52.209-6Protecting the Governments Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment. 52.212-1Instructions to Offerors Commercial Items 52.212-3 Alt IOfferor Representations and Certifications Commercial Items (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the ORCA website, http://orca.bpn.gov.) 52.212-4Contract Terms and Conditions Commercial Items 52.212-5Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items Clauses within 52.212-5 are hereby incorporated: 52.203-6Restrictions on Subcontractor Sales to the Government 52.204-10Reporting Subcontract Awards 52.219-8Utilization of Small Business Concerns 52.219-28Post Award Small Business program Representation 52.222-3Convict Labor 52.222-19Child Labor Cooperation with Authorities and Remedies 52.222-21Prohibition of Segregated Facilities 52.222-26Equal Opportunity 52.222-35Equal Opportunity; Special disabled Veterans of the Vietnam Era, and other Eligible Veterans 52.222-36Affirmative Action for Workers with Disabilities 52.222-37Employment Reports on Special Disabled Veterans of the Vietnam Era, and Eligible Veterans 52.225-13Restrictions on Certain Foreign Purchase 52.223-18Contractor Policy to Ban Text Messaging While Driving 52.232-33Payment by electronic Funds Transfer- Central Contractor Registration 52.233-3Protest After Award 52.233-4Applicable Law for Breach of Contract Claim 52.222-40Notification of Employee Rights Under the National Labor Relations Act 52.247-34FOB Destination 252-203-7000Requirements Relating to compensation of Former DoD Officials 252.204-7004(Alt A)Required Central Contractor Registration 252.204-7008Export Controlled Items 252.209-7001Disclosure of Ownership or Control by the Government of a Terrorist Country 252-209.7004Subcontracting with Firms That Are Owned or Controlled by the Government of a Terrorist Country 252-211-7003Item Identification and Valuation; and its Alternate I 252-212-7000Offeror Representations and Certification Commercial items 252.212-7001Contract Terms and Conditions Required to Implement Statutes or Executive Orders Application to Defense Acquisition of Commercial Items Clauses within 252.212-7001 are hereby incorporated: 52.203-3Gratuities 252.203-7000Requirements Relating to Compensation of Former DoD Officials 252.225-7001Buy American Act and Balance of Payment Program 252.225-7009Restriction on Acquisition of Certain Articles Containing Specialty Metals 252.225-7012Preference for Certain domestic Commodities 252.232-7003Electronic Submission of Payment Requests 252.247-7023Transportation of Supplies by Sea 252.225-7000Buy American Act-Balance of Payment Program Certificate (a) Definitions. Commercially available off-the-shelf (COTS) item, component, domestic end product, foreign end product, qualifying country, qualifying country end product, and United States have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government-- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American Act or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that-- (i) Each end product, except those listed in paragraph (c)(2) or (3) of this provision, is a domestic end product; and (ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror certifies that the following end products are qualifying country end products: ----------------------------------------------------------------------- (Line Item Number Country of Origin) ----------------------------------------------------------------------- (Country of Origin) (3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of ``domestic end product'': (Line Item Number)----------------------------------------------------- (Country of Origin (If known))----------------------------------------- (End of provision) 252.232-7010Levies on Contract Payment 252.243-7002Request for Equitable Adjustment 252.246-7003Notification of Potential Safety Issues 52.233-2Service of Protest (a)Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed direct with an agency and copies of any protest that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt form Military Sealift Fleet Support Command, N10 Attn: Arlene Wright 471 C Street, Naval Station Norfolk, VA 23511. (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. Addendum to 52.233-2 Service of Protest Interested parties may request an independent review of their protest as an alternative to consideration by the Contracting Officer or as an appeal of the contracting officer s decision on their protest. See FAR 33.103. Requests for independent review shall be addressed to Code N10 or N10X Military Sealift Command, 914 Charles Morris Ct SE, Washington Navy Yard, DC 20398-5540. MSFSC encourages potential protesters to discuss their concerns with the Contracting Officer prior to filing a protest. 52.252-2Clauses Incorporated by Reference This contract incorporates one or more clauses by reference with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause my be accessed electronically at this/these address(es): http://www.arnet.gov/far Responsible sources shall provide the following: 1.Price quote which identifies the requested item(s), unit price, and extended price 2.Total price 3.Prompt Payment Terms 4.Remittance address, Tax Identification Number, DUNS number and Cage Code 5.Responses to this solicitation are due 22 December 2011 at 10:00 a.m. local time, Norfolk, VA. LATE QUOTES MAY NOT BE CONSIDERED FOR EVALUATION. Quotes may be emailed to douglas.jones3@navy.mil. Please reference the solicitation number on your quote. 6.Award will be based on Lowest Price.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/9cd7a14d4aac4d15f9bba405bf93f99f)
- Place of Performance
- Address: Parts/Supplies to be delivered to:
- Zip Code: MSC BATS Warehouse, San Diego, CA
- Zip Code: MSC BATS Warehouse, San Diego, CA
- Record
- SN02639377-W 20111216/111214234645-9cd7a14d4aac4d15f9bba405bf93f99f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |