MODIFICATION
83 -- Lightweight Maintenance Enclosure (LME) & Components
- Notice Date
- 12/20/2011
- Notice Type
- Modification/Amendment
- NAICS
- 314912
— Canvas and Related Product Mills
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Clothing & Textiles, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPM1C1-10-R-0187
- Point of Contact
- Brian McGinley, Phone: 215-737-2418, Maria Sesso-Punzo, Phone: 215-737-0558
- E-Mail Address
-
Brian.McGinley@dla.mil, maria.sesso-punzo@dla.mil
(Brian.McGinley@dla.mil, maria.sesso-punzo@dla.mil)
- Small Business Set-Aside
- HUBZone
- Description
- This is the fifth amendment to the original notice. Refer to the solicitation and amendments posted on DIBBS for more information. Subject solicitation will be issued as a Total HUBZone Small Business Set-Aside for the purchase of the Lightweight Maintenance Enclosure (LME) and Components. There will be two Fixed Quantity contracts for the following quantities: LOT #1 ITEM: LME Green NSN: 8340-01-456-3637 QUANTITY: 864 EA LOT #2 ITEM: LME Green NSN: 8340-01-456-3637 QUANTITY: 610 EA ITEM: LME Tan NSN: 8340-01-507-4375 QUANTITY: 254 EA ITEM: Support, Tent Frame NSN: 8340-01-475-8150 QUANTITY: 9 EA ITEM: Frame Assembly with Cable Header NSN: 8340-01-475-9279 QUANTITY: 5 EA ITEM: Extension Assembly NSN: 8340-01-475-9648 QUANTITY: 9 EA ITEM: Fabric Assembly, Intermediate Panel, LME Green NSN: 8340-01-475-9490 QUANTITY: 9 EA ITEM: Fabric Assembly, End Panel, LME Green NSN: 8340-01-475-9495 QUANTITY: 61 EA ITEM: Transport/Storage Cover, Frame NSN: 8340-01-475-9504 QUANTITY: 63 EA ITEM: Transport/Storage Cover, Fabric Assemblies NSN: 8340-01-475-9864 QUANTITY: 52 EA ITEM: Fabric Assembly, Intermediate Panel, LME Tan NSN: 8340-01-507-4376 QUANTITY: 7 EA ITEM: Fabric Assembly, End Panel, LME Tan NSN: 8340-01-507-4378 QUANTITY: 6 EA ITEM: Lower Side Arch Assembly NSN: 8340-01-475-8153 QUANTITY: 45 EA ITEM: Sider Assembly, Frame NSN: 8340-01-475-9509 QUANTITY: 71 EA ITEM: Lower Leg Assembly, Frame NSN: 8340-01-475-9530 QUANTITY: 27 EA ITEM: Door Header, Assembly NSN: 8340-01-475-9651 QUANTITY: 28 EA ITEM: Cable Header, Assembly NSN: 8340-01-477-9657 QUANTITY: 86 EA ITEM: Hitch Pin Clip, Assembly NSN: 8340-01-477-9709 QUANTITY: 86 EA ITEM: Frame Assembly Complete NSN: 8340-01-475-8132 QUANTITY: 1 EA ITEM: Upper Side Arch Assembly NSN: 8340-01-475-8152 QUANTITY: 114 EA The offeror is required to offer pricing on both lots. Failure to provide pricing on both lots will be cause for rejection of the offeror's entire proposal. After award is made under Lot #1, the awardee will no longer be eligible to receive an award under Lot #2. Best Value Source Selection Procedures will be utilized and offerors will be required to submit a technical proposal with Product Demonstration Model (PDM) and Experience/Past Performance as the evaluation factors. The factors, which are listed in descending order of importance, and sub-factors are listed as follows: 1) Product Demonstration Model (for cloth) A. Required PDM Testing in Accordance with CN-PD 06-10. (1) Bursting Strength/Puncture Resistance (Para 3.6.4 of CN-PD 06-10) Required only for USIFI-PRF-44103 (2) Cold Crack (Para. 3.6.5 of CN-PD 06-10) Required only for USIFI-PRF-44103 (3) Seam Strength (Para. 3.6.6 of CN-PD 06-10) Required only for USIFI-PRF-44103 (4) Deam Load Seam Strength (Para. 3.6.7 of CN-PD 06-10) Required only for USIFI-PRF-44103 (5) Adhesion of Coating (Para. 3.6.8 of CN-PD 06-10) Required only for USIFI-PRF-44103 (6) Weight (Para. 3.6.1.1 of CN-PD 06-10) Required only for USIFI-PRF-44103 (7) Flame (Paras. 3.6.1.2, 3.6.2 and 4.8.2.1 of CN-PD 06-10) Required for both USIFI-PRF-44103 and USIFI-PRF-20696 B. Required PDM Testing in Accordance with Table I Requirements of USIFI-PRF-44103 (1) Hydrostatic (Para. 4.6.2) (2) Abrasion Resistance Test (Para. 4.6.5) (3) Initial Stiffness Test (Para. 4.6.6) (4) Stiffness at Low Temperature (Para. 4.6.7) (5) Opacity (Para. 4.6.13) (6) Matching (Para. 4.6.14) (7) Spectral Reflectance Measurements (Para. 4.6.15) (8) Blocking (Para. 4.6.16) C. Required Testing in Accordance with Table I Requirements of USIFI-PRF-20696 (1) Weight (ASTM D 3776, Method C) (2) Breaking Strength, Initial [ASTM D 5035 (1C-E or 1C-T)] (3) Tear Strength (ASTM D 751, Procedure B) (4) Stiffness (Para. 4.4.2) (5) Adhesion of Coating (ASTM D 751) (6) Blocking (ASTM D 751 and Para. 4.4.3) (7) Hydrostatic (ASTM D 751 and Para. 4.4.4.1 for initial and 4.4.4.2 for after abrasion) (8) Color (FED-STD-595 and Para. 4.4.10) 2) Experience/Past Performance* a. Experience b. Quality of Items / Delivery Performance *Note: The Experience/Past Performance sub-factors are of equal importance. Twelve deliveries will be made to Defense Distribution Depot New Cumberland, PA, commencing 240 days after date of award. A First Article Sample (cloth and one LME, Green or Tan) will be required 90 days after date of award. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. This is a pre-solicitation synopsis. The actual Request For Proposals (RFP), with information and specifics, will be posted on https://www.dibbs.bsm.dla.mil/. Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of information that will be found include: 1. On the DLA Internet Bid Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the Central Contractor Registration (CCR) system. 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their CCR registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as ‘The Berry Amendment') impose restrictions on the DOD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and ‘specialty metals' (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. Further information relative to this notice can be obtained by contacting Brian McGinley at 215-737-2418 or Brian.McGinley@dla.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-C/SPM1C1-10-R-0187/listing.html)
- Record
- SN02642885-W 20111222/111220234837-23c8c84eb24529558f33bc8ed4541f4b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |