MODIFICATION
Y -- UMSC & Mech Control $100M MATOC
- Notice Date
- 12/21/2011
- Notice Type
- Modification/Amendment
- NAICS
- 238220
— Plumbing, Heating, and Air-Conditioning Contractors
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Savannah, Attn: CESAS-CT, PO Box 889, Savannah, Georgia, 31402-0889, United States
- ZIP Code
- 31402-0889
- Solicitation Number
- W912HN-12-Z-0026
- Archive Date
- 6/29/2012
- Point of Contact
- Angela D. Broughton, Phone: 9126525301
- E-Mail Address
-
angela.d.broughton2@usace.army.mil
(angela.d.broughton2@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a Sources Sought/Request for Information only. This is not a Solicitation Announcement, nor is it a Request for Proposal. This request does not obligate the government in any contract award. The U.S. Army Corps of Engineers, Savannah District, is conducting preliminary research to determine the market capabilities of potential contractors to support projects in the broad category of UMSC & Mech Control installation and repair under a multiple award task order contract (MATOC), estimated total capacity of $100M over five years. Task orders issued under this proposed MATOC will require performance of work anywhere in the South Atlantic Division area of responsibility ( North Carolina, South Carolina, Georgia, Florida, Alabama and Mississippi.) T ask orders placed under this MATOC is intended to provide The minimum ordering limit of each Task Order for the UMCS & Mechanical Controls MATOC contract is $750,000 and the maximum is $10 Million. All interested firms with 238220 as an approved NAICS code have until January 4, 2011 at 2:00pm to submit the following information: - Name & Address of your Firm - Point of Contact (name/phone/email - Current ORCA - Business Size, to include designation as HUBZone, 8(a), Service Disabled Veteran Owned Small Business, Small Disadvantaged Business, Woman-Owned Business, and large business. [If an 8(a) Small Business, your firm must have an office in Region IV (GA, AL, NC, TN, MS, FL, KY, SC)] Any supporting documentation that confirms your socio-economic status should be provided, i.e. letter of certification from VA confirming SDVOSB status. The Government must be able to verify SBA certification of Hubzone and 8(a) via CCR. - Bonding capability-both single and aggregate, as evidenced by submission of Surety Company letter stating bonding capacity. This document must bear original signatures. Further, interested parties must ensure a power of attorney accompanies this letter if it is signed by an agent for the surety. - Evidence of capabilities to perform comparable work in the area of New construction, rehabilitation or maintenance and repair of Direct Digital Control (DDC) Systems, Utility Monitoring Control System (UMCS), HVAC Systems (AHU, Boilers, Chillers), UG Hot and Chill water piping and Fire Protection Sprinkler Systems. on three recent projects (not more than five years old) with a contract award of no less than $5 Million dollars and a minimum square footage of 20,000 SF. Include the project name and description of the key/salient features of the project (i.e., square footage, multi-story, secure facility, phased renovation, etc.), completion date, total contract construction value, whether it was design-build. construction only, renovation or rehabilitation, and your company's level of involvement in the project, i.e. subcontractor (type), prime, GC, etc. and your specific role. Additionally, if you were teaming with another firm, clearly identify your role on the project(s) submitted. Please provide at least one point of contact (with email address and phone number) for project validation. The Government will not give credit to projects if the lack of information hinders the ability to determine relevancy and/or level of experience. - Firm's capability to perform, to include geographic span and project size. Include firm's in-house capability to execute design and construction, or established relationship with a design firm to perform D-B. - Information on Teaming Arrangement (if applicable). Although we are not looking for formal signed agreements at this time, if you intend to "team" with another firm, formally or informally, you must submit information, not more than one (1) page, about your team's involvement. More specifically, you must submit sufficient information for the government to determine the roles each team member will play and what your socio-economic status is or will be considering the proposed arrangement. Therefore, included in your one (1) page if you are a small business and you intend to mentor/protégé and/or JV with a large business both team members must sign agreeing that 51% of the profits and managerial function will go to and be performed by the small business. Likewise, if you are an 8(a) firm intending to mentor/protégé and/or JV with a large business both team members must sign agreeing that 40% of the labor will be performed by the 8(a) firm. Additionally, if the team is a mentor/protégé arrangement, identify the areas that will be mentored. Any supporting documentation that confirms your socio-economic status as a team should be provided. The Government may not give credit to your socio-economic class if there is not sufficient documentation to support it or if the Government cannot verify thorugh other means that your business is as such. The requested information shall be submitted hard copy a long with one (1) copy CD-ROM via FEDEX or UPS to: U.S. Army Corps of Engineers ATTN: CECT-SAS-E (Broughton) 100 W. Oglethorpe Avenue Savannah, GA 31401 Electronic copies will not be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA21/W912HN-12-Z-0026/listing.html)
- Record
- SN02643537-W 20111223/111221234652-d3f2470cb06e4f488146d8888ffa19bd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |