SOLICITATION NOTICE
J -- USCGC AXE FY12 DRYDOCK REPAIRS
- Notice Date
- 12/22/2011
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG85-12-Q-P45207
- Archive Date
- 12/22/2012
- Point of Contact
- Lisa Dieli, Phone: 757-628-4647
- E-Mail Address
-
lisa.dieli@uscg.mil
(lisa.dieli@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The United States Coast Guard Surface Forces Logistics Center, Contracting and Procurement Branch 2, IBCT Product Line intends to issue a Commercial Request for Quote (RFQ) for Dry Dock Repairs to the USCGC AXE (WLIC 75310) 75 FOOT "D CLASS" INLAND CONSTRUCTION TENDER and USCG 68B BARGE (68020) home ported in MORGAN CITY, LA. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1,000 employees. The simplified acquisition will be issued as a Best Value Request for Quote (RFQ), on or about January 4, 2012. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. This requirement will be evaluated using past performance as an evaluation factor. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SMALL BUSINESS SET-ASIDE. A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). The performance period will be 49 calendar days with a start date on or about April 11, 2012. The place of performance will be at the contractor's facility. Please note: The vessel is geographically restricted to an area no greater than 400 nautical miles from the cutter's homeport and no open water transits. The scope of the acquisition is for various ship repairs that may include the following: Hull Plating (Side Scan), Ultrasonic Testing - Tender Hull Plating (Side Scan), Ultrasonic Testing - Barge Hull and Structural Plating - 12.75-Pound Steel Plate, Repair, Tender Hull and Structural Plating - 12.75-Pound Steel Plate, Repair, Barge Appendages (U/W), Leak Test - Tender Appendages (U/W), Leak Test - Barge Propulsion Shaft Rope Guards, Inspect and Repair Appendages (U/W) - Internal, Preserve - Tender Appendages (U/W) - Internal, Preserve - Barge Voids (Non-Accessible), Preserve Internal Surfaces, Tender U/W Body, Preserve "100%" - Tender U/W Body, Preserve "100%" - Barge Cathodic Protection / Zincs, Renew - Tender Cathodic Protection / Zincs, Renew - Barge Drydocking - Tender Drydocking - Barge Tanks (Potable Water), Preserve "100%" - Barge Hull Plating (Freeboard), Ultrasonic Testing - Tender Hull Plating (Freeboard), Ultrasonic Testing - Barge Propulsion Shafting, Straighten Propulsion Shaft Bearings (External), Check Clearances Propellers, Remove, Inspect, and Reinstall Sea Strainers - Duplex (All Sizes), Overhaul Rudder Assembly, Remove, Inspect and Reinstall Spud Well(s), Preserve - Barge Tanks (Potable Water), Preserve "100%" - Tender Propulsion Shafting; Remove, Inspect, and Reinstall Bilges (Machinery Space), Preserve Propeller, Perform Minor Repairs and Reconditioning Spud Well Liners, Renew - Barge Stern Tube Interior Surfaces, Preserve 100% Keel Coolers, Clean, Inspect and Hydro Propulsion Shaft Seals (Mechanical), Inspect and Clean Fathometer Transducer, General Maintenance Compartment Interior (Barge Main Hold), Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Fwd Rake) Bilge, Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Aft Rake) Bilge, Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Fwd ATON Room) Bilge, Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Bos'n Hole) Bilge, Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Battery Room) Bilge, Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Engineer Stores) Bilge, Bulkhead and Overhead Surfaces, Preserve Compartment Interior (Barge Paint Locker) Bilge, Bulkhead and Overhead Surfaces, Preserve Propulsion Shaft Rope Guard, Renewal Voids (Non-Accessible), Leak Test - Tender Propulsion Shaft Bearings (External), Renew Spud Well(s), Inspect - Barge Tanks (Sewage Holding), Preserve " 100%" - Tender Decks - Exterior (Barge Construction), Preserve Temporary Services, Provide Sea Trial Performance, Provide Support Deck Plating (Barge), Inspect and Repair Sea Valves and Waster Pieces, Overhaul or Renew Composite Labor Rate GFP Report Laydays All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. For further information or questions regarding this solicitation, please contact Mrs. Lisa Dieli at (757) 628-4647, or by e-mail to Lisa.dieli@uscg.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG85-12-Q-P45207/listing.html)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN02644896-W 20111224/111222235007-196340748ae87149acaee47929769af9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |