SOLICITATION NOTICE
Z -- McNary Emergency Intake Gate Refurbishment
- Notice Date
- 4/30/2012
- Notice Type
- Presolicitation
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- USACE District, Walla Walla, 201 N. Third Avenue, Walla Walla, WA 99362-1876
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF-12-B-0010
- Response Due
- 7/31/2012
- Archive Date
- 9/29/2012
- Point of Contact
- Elaine M. Vandiver, 509-527-7221
- E-Mail Address
-
USACE District, Walla Walla
(elaine.m.vandiver@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- McNary Emergency Intake Gate Refurbishment. This will be a firm-fixed-price construction contract located at McNary Lock and Dam (Umatilla County, Oregon and Benton County, Washington). Estimated construction magnitude is between $250,000 and $500,000; and 100% performance and payment bonds will be required. Solicitation will be open to small business concerns only. NAICS code for this project is 237990, and the small business size standard is $33,500,000 average annual receipts. The period of performance is anticipated to be between July and September 2012. Background: Prior to 1995, Emergency Intake Gate (EIG) Bulkheads #1 and #3 were torch cut into four pieces. A later contract was awarded for the re-welding of these sections. Weld inspections, performed by in November 2007, revealed all welds were unsatisfactory per ultrasonic testing (UT) methods. Both bulkheads are currently located in the McNary boneyard on supports that allow complete access (from below and above) to the seals, weld replacement and gate surface repair areas. Bulkhead dimensions are approximately 23 feet by 54 feet by 4 feet, and top skin surface is about 8 feet above ground level. Scope of Work Details: -lead paint abatement for all work dealing with paint (scraping, and/or disposal) -remove existing weld for each section of the bulkhead (approx 80 LF; 40 LF per bulkhead) -weld gate parts back together (approx 80 LF of CJP weld on inch plate; 40 LF per bulkhead) -perform UT weld inspections -clean corroded areas on gates and verify proper operation-approximately 600 square feet. (300 SF each) -paint areas of new welds and cleaning-approximately 400 square feet. (200 SF each) -remove and replace seals and seal fasteners-approximately 1000 (500 each screws and about 360/180 each lf of 4.75 inch bulb seal) -remove and replace (or disassemble, inspect, repair) and reinstall two equalizer valves (1 each), as necessary -inspect intake gates, repair as required, and verify proper operation The contract activities will require additional jacking supports when emergency bulkheads are cut into 4 pieces (each). Some stands and jacking supports will be provided as Government Furnished Equipment. Safety will be a concern when welding and working around heavy items and potential exposure to lead-based paint. Therefore, the contractor will be required to provide a Quality Control Manager, and Site Safety and Health Officer. Solicitation Number W912EF-12-B-0010 will be posted to the FBO website on or about May 15, 2011. The solicitation is an Invitation for Bid. Bids will be due no sooner than 30 calendar days after actual solicitation issuance date. Important Note: The FedBizOpps Response Date listed elsewhere in this synopsis is for FedBizOpps archive purposes only. It does not necessarily reflect the actual bid due date. The bid due date will be contained in the solicitation and any solicitation amendments that may be issued. A site visit will be offered approximately 2 weeks after the solicitation is made available to bidders. See solicitation for details about the site visit. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to Elaine.M.Vandiver@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site. When available, the solicitation documents for this project will be available via FedBizOpps.gov https://www.fbo.gov NO CD's OR HARD COPIES WILL BE AVAILABLE. Bidders are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the "Add Me To Interested Vendors" button in the listing for this solicitation on FedBizOpps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA68/W912EF-12-B-0010/listing.html)
- Place of Performance
- Address: McNary Lock and Dam 82790 Devore Road Umatilla OR
- Zip Code: 97882-1441
- Zip Code: 97882-1441
- Record
- SN02734810-W 20120502/120430235552-6fca5659437f35e06ce7be51b29451f4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |