Loren Data's SAM Daily™

FBO DAILY ISSUE OF JUNE 29, 2012 FBO #3870
MODIFICATION

65 -- Lumbar Retractor

Notice Date

6/27/2012
 

Notice Type

Modification/Amendment
 

Contracting Office

4100 East Mississippi Ave., Glendale, CO 80246
 

ZIP Code

80246
 

Solicitation Number

554-12-3-068-0559
 

Response Due

6/29/2012
 

Archive Date

12/26/2012
 

Point of Contact

Name: Susan Albanese, Title: Contracting Specialist, Phone: 3036033261, Fax: 3036916558
 

E-Mail Address

susan.albanese@va.gov;
 

Small Business Set-Aside

N/A
 

Description

AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 554-12-3-068-0559 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-58. The associated North American Industrial Classification System (NAICS) code for this procurement is 334510 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-06-29 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Denver, CO 80220 The VHA NCO 19 - 554 - ECHCS requires the following items, Meet or Exceed, to the following: LI 001, S-0438 T-HNDL LUMBAR RETRACTOR V-T F/S 0440, 2, EA; LI 002, S-0102 S-L RETRACTOR LUMBAR BODY DBL HNG 200MM, 2, EA; LI 003, T-0095 S-L SLIDE LOAD LOCKING RETRACTOR HANDLE, 4, EA; LI 004, S-0424 S-L VERSATRAC T-BAR LUMBAR SPINE 25X40MM, 2, EA; LI 005, S-0425 S-L VERSATRAC T-BAR LUMBAR SPINE 25X50MM, 2, EA; LI 006, S-0426 S-L VERSATRAC T-BAR LUMBAR SPINE 25X60MM, 2, EA; LI 007, S-0427 S-L VERATRAC T-BAR LUMBAR SPINE 25X70MM, 2, EA; LI 008, S-0399 VERSA TRAC HOOK SHARP W/TEETH SHAFT 40MM, 2, EA; LI 009, S-0401 VERSA TRAC HOOK SHARP W/TEETH SHAFT 60MM, 2, EA; LI 010, S-0402 VERSA TRAC HOOK SHARP W/TEETH SHAFT 70MM, 2, EA; LI 011, S-0440-1 BODY V-T LUMBAR RETR FRAME F/MULTPL B, 2, EA; LI 012, S-0429 VERSA TRAC BLADE HOLDER ADJ LUMBAR, 8, EA; LI 013, S-0435 RETR BLADE HOLDER V-T SLIDELOAD F/S-0440, 8, EA; LI 014, S-0452 BLADE V-T 15 DEG ANG TITAN W.TTH 23X35MM, 8, EA; LI 015, S-0453 BLADE V-T 15 DEG ANG TITAN W/TTH 23X45MM, 8, EA; LI 016, S-0451 BLADE V-T 15 DEG ANG TITAN W/TTH 23X65MM, 8, EA; LI 017, S-0455 BLADE V-T 15 DEG ANG TITAN W/TTH 23X75MM, 8, EA; LI 018, S-0456 BLADE V-T 15 DEG ANG TITAN W/TTH 23X85MM, 8, EA; LI 019, S-0457 BLADE V-T 15 DEG ANG TITAN W/TTH 23X100MM, 8, EA; LI 020, S-0458 BLADE V-T 15 DEG ANG TITAN W.TTH 23X120M, 8, EA; LI 021, S-0459 SACRAL CUTOUT TITAN RIGHT V-T 30X40MM, 2, EA; LI 022, S-0460 SACRAL CUTOUT TITAN LEFT V-T 30X40MM, 2, EA; LI 023, S-0461 SACRAL CUTOUT TITAN RIGH V-T 60X45MM, 2, EA; LI 024, S-0462 SACRAL CUTOUT TITAN LEFT V-T 60X45MM, 2, EA; LI 025, S-0441 BLADE V-T 15 DEG ANG TITAN W/TTH 45X50MM, 4, EA; LI 026, S-0442 BLADE V-T 15 DEG ANG TITAN W/TTH 45X60MM, 4, EA; LI 027, S-0443 BLADE V-T 15 DEG ANG TITAN W/TTH 45X70MM, 4, EA; LI 028, S-0444 BLADE V-T 15 DEG ANG TITAN W/TTH 45X80MM, 4, EA; LI 029, S-0445 29 BLADE V-T 15 DEG ANG TITAN W/TTH 60X50MM, 4, EA; LI 030, S-0446 BLADE V-T 15 DEG ANG TITAN W/TTH 60X60MM, 4, EA; LI 031, S-0447 BALDE V-T 15 DEG ANG TITAN W/TTH 60X70MM, 4, EA; LI 032, S-0448 BLADE V-T 15 DEG ANG TITAN W/TTH 60X80MM, 4, EA; LI 033, S-0449 BLADE V-T 15 DEG ANG TITAN W/TTH 60X100MM, 4, EA; LI 034, S-0450 BLADE V-T 15 DEG ANG TITAN W/TTH 60X120MM, 4, EA; LI 035, Y-0155 CASE VERSA TRAC RETRACTOR, 2, EA; LI 036, S-0140 S-L MICRO BLUNT BLADE 35X14MM ALUM BLUE, 2, EA; LI 037, S-0141 S-L MICRO BLUNT BLADE 40X14MM ALUM RED, 2, EA; LI 038, S-0142 S-L MICRO BLUNT BLADE 45X14MM ALUM GREEN, 2, EA; LI 039, S-0143 S-L MICRO BLUNT BLADE 50X14MM, 2, EA; LI 040, S-0144 S-L MOCRO BLUNT BLADE 55X14MM, 2, EA; LI 041, S-0145 S-L MICRO BLUNT BLADE 60X14MM, 2, EA; LI 042, S-0146 S-L MICRO TOOTH BLADE 14.35MM ALUM BLUE, 2, EA; LI 043, S-0147 S-L MICRO TOOTH BLADE 40X14MM ALUM RED, 2, EA; LI 044, S-0148 S-L MOCRO TOOTH BLADE 45X14MM ALUM GREEN, 2, EA; LI 045, S-0149 S-L MICRO TOOTH BLADE 50X14MM ALUM VIOLT, 2, EA; LI 046, S-0150 L-L MICRO TOOTH BLADE 55X14MM ALUM BLACK, 2, EA; LI 047, S-0151 S-L MICRO TOOTH BLADE 60X14MM ALUM GOLD, 2, EA; LI 048, S-0110 S-L BLUNT RETR BLADE 23X30MM ALUM SILVER, 2, EA; LI 049, S-0111 S-L BLUNT RETR BLADE 23X35MM ALUM BLUE, 2, EA; LI 050, S-0112 S-L BLUNT RETR BLADE 23X40MM ALUM RED, 2, EA; LI 051, S-0113 S-L BLUNT RETR BLADE 23X45MM ALUM GREEN, 2, EA; LI 052, S-0114 S-L BLUNT RETR BLADE 23X50MM ALUM VIOLET, 2, EA; LI 053, S-0115 S-L BLUNT RETR BLADE 23X55MM ALUM BLACK, 2, EA; LI 054, S-0116 S-L BLUNT RETR BLADE 23X60MM ALUM GOLD, 2, EA; LI 055, S-0117 S-L BLUNT RETR BLADE 23X65MM ALUM NAVY, 2, EA; LI 056, S-0118 S-L BLUNT RETR BLADE 23X70MM ALUM LT GRN, 2, EA; LI 057, S-0119 S-L BLUNT RETR BLADE 23X 75MM ALUM ORAGNE, 2, EA; LI 058, T-0095 S-L SLIDE LOAD LOCKING RETRACTOR HANDLE, 2, EA; LI 059, S-0156 S-L DEPTH GAUGE 30-100MM COLOR-CODED, 1, EA; LI 060, S-0120 S-L SHORT TOOTH BLADE 23X30MM ALUM SILVR, 1, EA; LI 061, S-0121 S-L SHORT TOOTH BLADE 23X35MM ALUM BLUE, 1, EA; LI 062, S-0122 S-L SHORT TOOTH BLADE 23X40MM ALUM RED, 1, EA; LI 063, S-0123 S-L SHORT TOOTH BLADE 23X45MM ALUM GREEN, 1, EA; LI 064, S-0124 S-L SHORT TOOTH BLADE 23X50MM ALUM VIOLT, 1, EA; LI 065, S-0125 S-L SHORT TOOTH BLADE 23X55MM ALUM BLACK, 1, EA; LI 066, S-0126 S-L SHORT TOOTH BLADE 23X60MM ALUM GOLD, 1, EA; LI 067, S-0127 S-L SHORT TOOTH BLADE 23X65MM ALUM NAVY, 1, EA; LI 068, S-0128 S-L SHORT TOOTH BLADE 23X70MM ALUM LT GRN, 1, EA; LI 069, S-0129 69 S-L LONG TOOTH BLADE 23X30MM ALUM SILVER, 1, EA; LI 070, S-0130 A-L LONG TOOTH BLADE 23X35MM ALUM BLUE, 1, EA; LI 071, S-0131 S-L LONG TOOTH BLADE 23X40MM ALUM RED, 1, EA; LI 072, S-0132 S-L LONG TOOTH BLADE 23X45MM ALUM GREEN, 1, EA; LI 073, S-0133 S-L LONG TOOTH BLADE 23X50MM ALUM VIOLET, 1, EA; LI 074, S-0134 S-L LONG TOOTH BLADE 23X55MM ALUM BLACK, 1, EA; LI 075, S-0135 S-L LONG TOOTH BLADE 23X60MM ALUM GOLD, 1, EA; LI 076, S-0136 S-L LONG TOOTH BLADE 23X65MM ALUM NAVY, 1, EA; LI 077, T-0100 S-L RING HANDLED RETRACTOR SIDE LOAD, 1, EA; LI 078, T-0101 S-L TRANSVERSE RETRACTOR SIDE LOAD 120MM, 1, EA; LI 079, S-0106 SCREWDRIVER F/SPINAL DISTRACTION, 1, EA; LI 080, S0107 SPINAL DISTRCTION TWIST DRILL 1.7MM, 1, EA; LI 081, S0079 S-L SPINAL DISTRACTOR LEFT MULTI-L 120MM, 1, EA; LI 082, S-0086 S-L SPINAL DISTRACTOR LEFT 100MM RACK, 1, EA; LI 083, S-0080 S-L DRILL GUIDE LEFT, 1, EA; LI 084, S-0104 S-L RETRACTOR DIST RIGHT MULI-L 120MM, 1, EA; LI 085, S-0087 S-L SPINAL DISTRACTOR RIGHT 100MM RACK, 1, EA; LI 086, S-0081 BONE TAMP 3MM, 1, EA; LI 087, S-0082 BONE TAMP 5MM, 1, EA; LI 088, S-0083 BONE TAMP 8MM, 1, EA; LI 089, S-0049 BONE GRAFT HOLDER S-L 8-1/2 IN, 1, EA; LI 090, S-0099 CALIPER, 1, EA; LI 091, S-0105 S-L DRILL GUIDE RIGHT, 1, EA; LI 092, Y-0125 S-L RETRACTOR INSTRUMENT CASE, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, VHA NCO 19 - 554 - ECHCS intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. VHA NCO 19 - 554 - ECHCS is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. In addition to any VHA buy terms entered in FedBid, the Seller (Bidder) has reviewed and acknowledges any attached solicitation documents, item details, delivery schedule, and/or instructions to Seller (collectively referred to as requirements), and agrees to all terms and conditions set forth in the solicitation documents. While additional support documentation (e.g. technical specifications, etc.) may be requested, pricing shall be entered in the reverse auction - offline pricing is not an acceptable bid. At the conclusion of the reverse auction, if attached to the buy, the awardee may be required to complete the solicitation documents at the time of award.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/DeVAMC/VAMCCO80220/554-12-3-068-0559/listing.html)
 

Place of Performance

Address: Denver, CO 80220

Zip Code: 80220-3808
 

Record

SN02787522-W 20120629/120627235204-8af48165095fbb6e0196525e00371a2f (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |