Loren Data's SAM Daily™

FBO DAILY ISSUE OF JULY 29, 2012 FBO #3900
DOCUMENT

99 -- Request For Information (RFI) Voltage Divider - Attachment

Notice Date

7/27/2012
 

Notice Type

Attachment
 

NAICS

334515 — Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
 

Contracting Office

N63394 NAVAL SURFACE WARFARE CENTER, CALIFORNIA 4363 Missile Way Port Hueneme, CA
 

Solicitation Number

N6339412R5136
 

Small Business Set-Aside

N/A
 

Description

This is a Request for Information (RFI). There is currently no solicitation package available. The Naval Surface Warfare Center, Corona Division is requesting information, comments, and questions regarding interest in a commercial or modified commercial High Voltage Divider solution that is capable of calibrating DC power supplies, insulation test sets, hipot testers, electrostatic voltmeters and other similar equipment in Navy inventory. The High Voltage Divider is intended to be used by Navy personnel in shipboard and shore-based calibration laboratories and will be required to conform to CLASS 3 requirements as referenced in MIL-PRF-28800 and as listed below. Equipment will also be subjected to operational conditions aboard both military and commercial land, sea, and air vehicles during periods of operation, transportation, and storage. A government approved technical manual that incorporates illustrated drawings, assembly diagrams, recommended parts replacement, maintenance and appropriate safety warnings will be required. The Navy interest for this Voltage Divider represents an overall fleet modernization to replace an existing item which is now obsolete. Improvements for the modernization include the use of direct measurements without requiring the use of correction factors. The standard being replaced also did not require the use of correction factors. Test requirements will be invoked for any proposed modified commercial instruments to ensure government specifications are met. Note: This is not intended to be a full developmental project. Commercial and modified commercial proposals are anticipated. Any future contracts would require the manufacturer to bear the full cost risks until pre-production testing has been completed and approved by the government. The preferred candidate will meet the specific performance requirements listed in paragraph 3.11 below. A unit that may require some modification is also of interest to the Navy. Other additional requirements are attached. Please forward any comments, questions, concern regarding the specification or general interest information to: Desiree DeRuyter NSWC, Corona Division CM012 1999 4th Street, Bldg. 523 Norco, CA 92860 951-273-5530 desiree.deruyter@navy.mil
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N63394/N6339412R5136/listing.html)
 

Document(s)

Attachment
 

File Name: N6339412R5136_Voltage_Divider_RFI__1_Jun_2012_JK.docx (https://www.neco.navy.mil/synopsis_file/N6339412R5136_Voltage_Divider_RFI__1_Jun_2012_JK.docx)

Link: https://www.neco.navy.mil/synopsis_file/N6339412R5136_Voltage_Divider_RFI__1_Jun_2012_JK.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN02818808-W 20120729/120728000848-7e5e79bf4bc9a462f83c166e05ef1c96 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |