MODIFICATION
40 -- Wire Rope, 3/8" diameter; galvanized 3 X 19 improved plow steel
- Notice Date
- 8/8/2012
- Notice Type
- Modification/Amendment
- NAICS
- 332618
— Other Fabricated Wire Product Manufacturing
- Contracting Office
- Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Western Acquisition Division-Boulder, 325 Broadway - MC3, Boulder, Colorado, 80305-3328, United States
- ZIP Code
- 80305-3328
- Solicitation Number
- RA133R12RQ0524
- Archive Date
- 7/13/2012
- Point of Contact
- Sue Bratton, Phone: 303-497-4973
- E-Mail Address
-
Sue.Bratton@noaa.gov
(Sue.Bratton@noaa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- *****This action has been reposted to FBO as RA1330-12-RQ-0524**** NOAA's Pacific Marine Environmental Laboratory (PMEL) has a requirement for Wire Rope, 3/8" diameter; galvanized 3 X 19 improved plow steel. The specialty rope is a 3/8" galvanized 3X19 improved plow steel of low rotation construction with a minimum breaking strength of 12,500 pounds. The wire rope must meet the following minimum specifications: 1. Wire Rope shall be 3/8" diameter; galvanized 3 X 19 improved plow steel. 2. Wire rope shall be of low rotation construction. 3. Wire shall have a watertight polypropylene jacket with outside diameter of 0.5", +0.016"-0.012" 4. Wire shall be impregnated with plastic so that the three strands are locked in plastic. 5. Wire rope shall be centered in plastic jacket with maximum off-center tolerance of 0.016". 6. Wire rope shall have a minimum breaking strength of 12,500 pounds. 7. Wire will be ordered and shall be delivered in lengths that are multiples of 715 meters. A variation of plus 1% or minus 0% is allowable. One length per reel. 8. Wire shall be provided on heavy-duty wooden reels. Specifications follow: • Size: 30"x23"x12" • Reel drive pinhole 1" diameter, 5" from center, both sides • Reel head 5/4" boards, 2 ply, (actual head thickness, 2") with wood laid perpendicular to each other and securely nailed. Nail heads shall be countersunk below the surface of the wood. • Headboards shall have hole of 3"' diameter. • Barrel shall have ¾" thick wood staves mortised into reel head. • Reel shall be assembled with three or four 3/8" diameter steel bolts having cup washers on each end. Bolt shall be trimmed flush with nut. • Reels must be Heat Treated and so marked to meet international shipping standards. Any questions regarding this solicitation must be submitted in writing via e-mail to the Contract Specialist, Sue Bratton at sue.bratton@noaa.gov. *****This action has been reposted to FBO as RA1330-12-RQ-0524******
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NOAA/MASC/RA133R12RQ0524/listing.html)
- Place of Performance
- Address: Pacific Marine Environmental Labs, 7600 Sand Point Way, Seattle, Washington, 98115, United States
- Zip Code: 98115
- Zip Code: 98115
- Record
- SN02832031-W 20120810/120809001215-e2a3673c689787fac02d1ba65b9135cf (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |