SOLICITATION NOTICE
49 -- DENA - Exhaust Vents
- Notice Date
- 8/23/2012
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- ARO - AKRO ALASKA REGIONAL OFFICE 240 West 5th Avenue ANCHORAGE AK 99501
- ZIP Code
- 99501
- Solicitation Number
- P12PS13766
- Response Due
- 8/31/2012
- Archive Date
- 8/23/2013
- Point of Contact
- Jordan W. Gunn Contract Specialist 9076443306 jordan_gunn@nps.gov;
- E-Mail Address
-
Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance
(EC_helpdesk@NBC.GOV)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICIATION. NO FURTHER SOLICIATION WILL BE ISSUED. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. P12PS13766 is issued as a request for quotation (RFQ). (iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Regulations. (iv) This procurement is being issued as Small Business Set-Aside under NAICS code 333413 with a Small Business Size Standard of 500 employees. (v) The contractor shall provide the following items in a New condition sealed in manufactures box, and NO Reconditioned or Refurbished equipment will be considered: 1. 1 each Wall mount vehicle exhaust ventilation hose reel assembly to include: Hose reel capable of holding a minimum of 24 lf of 6" high temperature hose used to connect to gas / diesel engine exhaust tail pipes including wall mounting hardware (recommended vendor model #VES6-REEL-43DL-XXX) a minimum of 24 lf of 6" high temperature rubber hose rated to a minimum of 600 degrees Fahrenheit including all connectors / clamps needed to connect hose to reel assembly (recommended vendor Part #7HD7-7309) hose to include 6" diesel exhaust stack tail pipe connector & any assembly hardware needed to connect tail pipe connector to above 6"hose (recommended vendor Part #3TLG-9007) minimum of 1/2 horse power electric motor & controls to provide automatic (powered) retraction of hose back onto the reel to include hose reel retraction motor on/off switch capable of being operated from ground level (recommended vendor Option #2KT7-7289-54") minimum of a 1-1/2 horse power electric blower motor that mounts directly on to the reel assembly or mounts to the wall with all connection hose and/or hardware to connect the reel to the blower motor & an outlet (exhaust) connection compatible with standard high temperature 6" or larger exhaust piping systems (recommended vendor Option #VES3-R23X-3X30-2X04) all components to be specifically designed for & compatible with high temperature vehicle exhaust systems capable of withstanding 600 degree Fahrenheit gasoline & diesel engine exhausts All electrical components to be NEMA compliant & UL listed. All components to have a 600 degree Fahrenheit fire resistant rating 2.1 each Wall mount vehicle exhaust ventilation hose reel assembly to include: hose reel capable of holding a minimum of 24 lf of 4-1/2" high temperature hose used to connect to gas / diesel engine exhaust tail pipes including wall mounting hardware (recommended vendor Model #VES4-R23X-4X25-XXXX) Note: hose reel comes standard with 25 lf of 4-1/2" rubber hose, vendor replaces with hose specified below reducing cost of reel by a minimum of 24 lf of 4-1/2" high temperature hose rated to a minimum of 600 degrees Fahrenheit including all connectors / clamps needed to connect hose to reel assembly (recommended vendor Part #7HD7-7308) hose to include 4-1/2" tail pipe connector & any assembly hardware needed to connect tail pipe connector to above 4-1/2"hose (recommended vendor Option #2TL0-9010-2TL0-9009) minimum of 1/4 horse power electric motor & controls to provide automatic (powered) retraction of hose back onto the reel to include hose reel retraction motor on/off switch capable of being operated from ground level (recommended vendor Option #2KT7-7284=32") minimum of a 1-1/2 horse power electric blower motor that mounts directly on to the reel assembly or mounts to the wall with all connection hose and/or hardware to connect the reel to the blower motor & an outlet (exhaust) connection compatible with standard high temperature 6" or larger exhaust piping systems (recommended vendor Option # VES3-R23X-3X30-2X04) all components to be specifically designed for & compatible with high temperature vehicle exhaust systems capable of withstanding 600 degree Fahrenheit gasoline & diesel engine exhausts All electrical components to be NEMA compliant & UL listed. All components to have a 600 degree Fahrenheit fire resistant rating The contractor shall provide the following items in a New condition sealed in manufactures box, NO Reconditioned or Refurbished equipment will be considered Please ensure that all shipping charges (F.O.B. Destination) are included into the cost of the above items. Shipped to Denali National Park & Preserve, Mile Post 237 Parks Highway, Denali Park, AK 99755 The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. (ix) 52.212-2, Evaluation -- Commercial Items applies. Quotes will be evaluated on lowest price technically acceptable (LPTA). (x) Offerors must include a completed copy of the provision at, 52.204-8, Annual Representations and Certifications and submit with its offer. (xi) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. (xii) 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders--Commercial Items to include clauses 52.222-3, Convict Labor 52.219-6, Notice of Total Small Business Set-Aside 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity, 52.222-36, Affirmative Action for Workers with Disabilities 52.225-01, Buy American Act, 52.225-13, Restriction on Certain Foreign Purchases 52.204-7--Central Contractor Registration, 52.209-5--Certification Regarding Debarment, Suspension, Proposed Debarment, and Other Responsibility Matters, 52.209-6--Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment, 52.232-33-Payment by Electronic Funds Transfer--Central Contractor Registration, 52.222-19 Child Labor-Cooperation with Authorities and Remedies, F.O.B.- Destination. Vendor must have registered in the System for Award Management at www.sam.gov prior to an award being made. Award will be made to the responsive, responsible vendor meeting all the requirements above at the lowest price. Offerors shall submit quotes to Jordan Gunn no later than 31 August 2012, 3:00 AST. Contractors may Email quotes via email address Jordan_gunn@nps.gov or fax quotes to 907-644-3802 please include solicitation number in the subject line. Questions may be directed to Jordan Gunn via phone (907)644-3306, or fax or email address above. Contracting Office Address: National Park Service, Alaska Regional Office (ARO) 240 West Fifth Avenue, Anchorage, AK 99501
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/NPS/APC-IS/P12PS13766/listing.html)
- Place of Performance
- Address: Denali National Park & Preserve, Denali Park AK
- Zip Code: 99755
- Zip Code: 99755
- Record
- SN02852774-W 20120825/120824000916-38c0012c3258b0e4a29caf5a87abdb2b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |