Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 20, 2012 FBO #3953
MODIFICATION

23 -- Mobile Laboratory/Office Trailer for US Army TARDEC Ground Survivability Systems

Notice Date

9/18/2012
 

Notice Type

Modification/Amendment
 

NAICS

336212 — Truck Trailer Manufacturing
 

Contracting Office

ACC - Warren (ACC-WRN)(DTA), ATTN: AMSTA-AQ-AMB, E Eleven Mile Road, Warren, MI 48397-5000
 

ZIP Code

48397-5000
 

Solicitation Number

12TADN06912
 

Response Due

9/25/2012
 

Archive Date

11/24/2012
 

Point of Contact

Eric Kirkpatrick, (586) 282-2559
 

E-Mail Address

ACC - Warren (ACC-WRN)(DTA)
(eric.l.kirkpatrick.mil@mail.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. I. INTRODUCTION A. This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in FAR Parts 12.6 as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. B. The combined synopsis and Request for Quotation (RFQ): 12TADN06912. C.Posting Date: 7 September 2012 D.Response Date: 25 September 2012 E.Contracting Office: Army Contracting Command - Warren (ACC-WRN) 6501 E. Eleven Mile, Warren, MI 48397. F.This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-60, 26 July 2012. G.The NAICS code applicable to this acquisition is 336212. Offeror must be certified under this NAICS code prior to receiving an award. H.This Combined Synopsis Solicitation contains clauses and provisions requiring a fill-in or representation. Offeror shall submit a copy of this Combined Synopsis Solicitation with their bid and respond to these clauses and provisions accordingly. A failure to complete these fill-ins may cause your offer to be determined ineligible for award. I. Basis for award- ACC-WRN intends to award to the lowest price, technically acceptable offeror and ability to meet specified delivery schedule. The Government may also choose to negotiate if only one offer is received. See provision at 52.209-4011 - Contractor Responsibility and Eligibility for Award for further details. J. Small Business Set-Aside: This is a total small business set-aside II.GENERAL A. The United States Army Tank and Automotive Research, Development and Engineering Center (TARDEC) in Warren, Michigan has a requirement for the following: Mobile Laboratory Trailer Required Characteristics 1.0 Scope: The purpose of this contract is to provide a new or reconditioned (in accordance with the definition at FAR 52.211-5) semi-truck trailer with dual motorized expandable sides to be used at test ranges. If an other-than-new trailer is proposed, the offeror must indicate this in its proposal. 1.1 General Information: The trailer shall be 53' in length and standard trailer width. The trailer shall have motorized expandable sections on each side to provide the maximum length and space possible. 2.0 Background: This trailer will primarily be used as a base camp at test ranges to allow TARDEC engineers to collect and analyze test data. This will require several work stations and a control station with connections for test equipment and high-speed camera control equipment. The fifth wheel section will be used as the kitchen area and also double as the classified storage and meeting area. The classified area must meet all Department of Defense (DOD) specifications. The trailer must have electrical power outlets and RJ45 Ethernet connections throughout the entire trailer. Ethernet connections from walls to computer racks must be present throughout the trailer. >>A bulkhead door with Z-panels is desired on each side of the goose-neck (min. 16" wide by 24" tall). TARDEC will populate the bulkhead as required. 3.0 Tasks/Requirements 3.1 Trailer Requirements 3.1.1 Trailer Shell The shell shall be a semi-truck trailer with double expandable sides. It shall include a heavy duty frame and smooth sides. 3.1.2 Expandables The expandable sections shall be between 35'-40' in length. They shall include a bifold floor section with a configuration of approximately 69". The expandable sections shall slide out/in automatically and under hydraulic or electric power. 3.1.3 Raised Fifth Wheel The fifth wheel location shall be enclosed and shall be accessible from the inside of the trailer. The area shall be finished, contain a small kitchenette, and contain a space with tie downs to accommodate removable safe (provided by the vendor) that is rated for DOD classified material (up to "Secret"). The fifth wheel room shall be sound proofed and have a door with the appropriate rated cipher locks leading to the main part of the trailer. The kitchenette shall contain a microwave and full size refrigerator and freezer (supplied by the vendor). 3.1.4 Exterior/Paint/Trim The exterior of the trailer shall be painted black and have custom graphics wraps applied. The exterior shall be prepped for all paint and graphics application. The roof shall have a UV/Thermal resistant coating Custom exterior graphics shall be fabricated and applied to the exterior surfaces where approved by government point of contact. >>The vendor shall produce and install this graphic wrap. The design shall be provided by the Government. The vendor shall provide a custom hospitality awning (50' x 20' approximate) that can be installed on either of the two expandable sections. The vendor is not required to provide sidewalls with this awning. >>An awning is not required to be installed over the expandable sections (i.e. an awning that deploys automatically as the expandable sides are deployed). The vendor shall provide a wrap-around side skirt that fits around the trailer and expandable sections to conceal the trailer underside. The vendor shall install all of the connections for the side skirt to the trailer and shall supply all hardware. The trailer shall have polished aluminum outer wheels. The trailer shall have rear freight doors and crew entrances on the rear of each expandable section. The crew doors shall have a window installed. Each door shall have a platform with handrails and stairs that can be set up and taken down and stored in belly boxes when not in use. >>Rear cargo doors will be used for access to the interior of the trailer. The doors on the expandable sections should be on the sidewalls (one on the rear sidewall of one expandable section; one on the front sidewall of the other expandable section to accommodate the front and rear rooms when the center divider is employed). Roof access ladders shall be installed to allow access to roof area. 3.1.5 Exterior Storage The vendor shall install aluminum or steel belly boxes of 40'- 53' in length along the sides of the trailer. These boxes shall lined with a spray-on type truck bed liner to protect the metal. The trailer shall have two Z-panel cable pass-through (one per side) that can accept BNC, RJ45, and blank punch-outs for future expansion. The trailer shall have one exterior speaker box per side, which may be either flush mounted or removable surface mount. The speaker box will accommodate speakers for external audio capability. These speaker boxes shall be wired into the entire trailer audio/visual system. The trailer shall have one exterior speaker box per side, recessed into each expandable section. The recessed speaker box will accommodate speakers for external audio capability. These speaker boxes shall be wired into the entire trailer audio/visual system. The trailer shall have one exterior monitor mount per side, recessed into each expandable section. These recessed monitor mounts shall be able to accommodate 42" LCD monitors (not provided by vendor) to allow overflow viewing. These monitors will be wired into the trailer's audio/visual system. 3.1.6 Powered Accessories The trailer shall have a powered landing gear system. All components and systems needed to accomplish this task shall be included. This may include but not limited to battery backups, pumps or wiring and controls. The contractor shall provide aluminum landing gear pads for extra ground support (Size can vary). >>Leveling system may be either manual or hydraulic. 3.1.7 Interior Finish Floors, walls, ceiling shall be insulated. They shall be covered in plywood and then covered with fabric wrapped sound walls. The finished product shall be that of a finished work area. >>The interior finish shall be tan or off-white. The trailer shall have a drop ceiling throughout the interior. The fifth wheel raised area shall be finished with a counter top and cabinets, upper cabinets, refrigerator and freezer, microwave, no running water and provisions to bolt/strap down government provided safe. A work station shall be included in the fifth wheel location. The entrance to the fifth wheel location from the rest of the trailer shall have an approved door with cipher locks and combination lock approved for a classified entrance. The trailer shall feature a recessed cable package so there is no surface mount cabling. The trailer shall have a retractable partition wall center divider that can separate the trailer into two rooms (front and rear) when needed. The trailer shall have thirty (30) stackable rolling task chairs. The trailer shall have nine (9) stackable workstation tables. The trailer shall have a single drop down projector. This projector shall be connected to all of the audio/video equipment and shall be able to project from a laptop. This project shall be recessed into the drop ceiling and lower down when needed. The viewing screen shall also be recessed in the ceiling and drop down when needed. >>The screen shall be near the rear cargo doors. The trailer shall have two (2) cabinets for storage inside the main cabin with the size of 60"w x 38" x 30"dp. The trailer shall have 16 overhead cabinets that are installed on the expandable sections (8 per section). >>These cabinets do not have to be lockable. >>The trailer shall have tan, off-white, or gray industrial grade rubber coin flooring. >>All cabinets shall have latched handles for safety. >>No windows are necessary as there is no need to observe operations outside besides the use of the aforementioned high-speed camera. >>A separate room for computer racks, satellite systems, etc. is not required. >>The vendor shall install one 19" rack (floor to ceiling). >>Phone connections at work stations are not required. >>25-30 workstations total are anticipated in this trailer. >>Aircraft style flush mounted tie downs shall be installed in the floor. 3.1.8 Electrical/Lighting This trailer shall have a hookup for an external generator to power the trailer. >>The connectors shall be camlock type. This trailer shall have a 240/120V electrical system with 200 Amp service. The panel shall cover all circuits and have ample room for future expansion. This will include wire, outlets, and miscellaneous equipment. >>There shall be a minimum of 4 circuits at 12 amp for future expansion. >>The vendor shall install the electrical system assuming that there will be 12A at each outlet. >>Lighting must be permanently installed and provide adequate illumination. A dimmer switch is acceptable but not required. The contractor shall supply all wiring, lights, electrical outlets and switches to complete this trailer. The trailer shall have at a minimum 10 recessed brass floor outlets. The trailer shall have at a minimum 10 220V, 20 amp receptacles throughout the trailer for computer rack power. The trailer shall have at a minimum 6 exterior duplex GFI receptacles with waterproof covers. The trailer shall have two semi recessed porch lights. The trailer shall have at a minimum of 6 exterior 300 watt scene flood lights. The trailer shall have two self luminous exit sign above exit doors in the interior. 3.1.9 Audio/Visual System The trailer shall have a central control station to operate all monitors and speakers (interior and exterior) to display the same signal or different signals. This shall also control the projector screen and drop down projector. 3.1.10 Mechanical The trailer shall have two (2) 5 ton HVAC wall units. This includes all installation, equipment, ducts, and supplies. >>Previous experience is driving the requirement for two A/C 5 ton units with 9KW of heat per unit. The equipment and personnel will vary as will the geographic location of the trailer (temperatures in excess of 100F are foreseeable). This trailer shall have an electronic thermostat connected and installed inside the trailer cabin. The HVAC shall be tested and certified working. 3.1.11 Tie Down Systems This trailer shall have a tie down/retention system. This shall include all tie downs, hooks, straps and pads that will hold down and secure all equipment for transport. 3.1.12 Documentation The contractor shall provide all applicable documentation for this trailer. This shall include but not limited to: operators manual, maintenance checklist, training document, and weight ticket. 3.1.13 Satellite / Internet This trailer shall have a satellite communications package. This package shall include a.96M mobile sat system with I-Direct 3100 Modem, 3-Watt transmitter, touch-screen controller, 4-Watt Buc upgrade, and all installation requirements. This trailer shall have a custom aluminum satellite dish mount. 3.1.14 Warranty The contractor shall provide, at minimum, a one year comprehensive warranty on all materials and workmanship. In the event that repairs should be necessary, the contractor shall be responsible for all costs associated with transporting the trailer to its facility for repairs. 3.2 Start of Work Meeting (SOWM) The Contractor shall conduct a Start of Work Meeting within 7 days of the award. The date for the meeting and agenda shall be coordinated between the Functional Technical Representative (FTR) and the Contractor within seven days of award. This meeting shall take no more than two days to complete. The Contractor shall have no more than three (3) personnel attend the SOWM. The contractor shall: -Provide a Meeting Agenda for the SOWM within 3 days prior to the schedule meeting. This agenda will cover the review of all tasks in this SOW. -Review the contractor's layout, construction plan and major milestones to meet contract requirements. -Provide for review and comment a detailed schedule that captures all of the actions, design reviews, and major milestones. -The Contractor shall submit Meeting Minutes NLT 3 days after the SOWM. The meeting minutes shall include a detailed summary of all items discussed during the meeting, as well as any assigned action items, final schedule and final layout. - The SOWM may be conducted by teleconference. 3.3 Training The Contractor shall create a standard operating procedure (SOP) document (CDRL A001), Training document (CDRL A002), and maintenance checklist (CDRL A003). ********************************************************************* Offeror shall include all shipping charges and deliver supplies F.O.B. DESTINATION to the following address: TACOM LCMC Central Receiving Dock, Bldg 249 6501 E. Eleven Mile Rd Warren, MI 48397-5000 Offeror shall deliver requirement by the following date: 15 March 2013 B. This acquisition is unrated under the Defense Priorities and Allocations System (DPAS). C. Bids must be received by ACC-WRN no later than 1500 hrs EST, 25 September 2012. Email bid to eric.l.kirkpatrick.mil@mail.mil. Offeror must be registered in System for Award Management (SAM) prior to receiving an award. Refer to website https://www.sam.gov/portal/public/SAM/. III. SOLICITATION PROVISIONS AND CONTRACT CLAUSES The following provisions and clauses apply to this Combined Synopsis/Solicitation: CLAUSES INCORPORATED BY REFERENCE 52.212-4 Contract Terms and Conditions--Commercial Items FEB 2012 52.247-34 F.O.B. Destination NOV 1991 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7006 Wide Area WorkFlow Payment Instructions JUN 2012 252.232-7010 Levies on Contract Payments DEC 2006 252.246-7000 Material Inspection And Receiving Report MAR 2008 52.212-1 Instructions to Offerors--Commercial Items FEB 2012 52.212-3 Offeror Representations and Certification--Commercial Items APR 2012 52.225-18 Place of Manufacture SEP 2006 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 252.212-7000 Offeror Representations and Certifications- Commercial Items JUN 2005 CLAUSES INCORPORATED BY FULL TEXT 52.201-4000 TACOM-WARREN OMBUDSPERSON Jan 06 Information regarding the TACOM-Warren Ombudsperson is located at the website http://contracting.tacom.army.mil/acqinfo/ombudsperson.htm. 52.204-4005 (TACOM) REQUIRED USE OF ELECTRONIC COMMERCE (AUG 2008) (a) All contract awards, modifications and delivery orders issued by TACOM will be issued electronically. The contractor has the option to receive these actions either via the Worldwide Web (WWW) or Electronic Data Interchange (EDI). Many provisions/clauses that appear "by reference", meaning only clause titles and regulation site are listed; their full texts can be found at the website http://farsite.hill.af.mil/ (b) In order to be eligible to receive an award under this solicitation, the successful offeror must be registered with the Department of Defense (DOD) Central Contractor Registration (CCR). The CCR registration process may be done electronically at the World Wide Web (WWW) site: http://www.ccr.gov/. (In order to be registered to use EDI, you must use the long form for registration. Certification information, including information on the EDI 838 TPP, must be furnished to the Contracting Officer within 60 calendar days after contract award to complete networking requirements within the Government.) (c) Worldwide Web Distribution. The contractor will receive an electronic Notice of the Award, Modification, or Delivery Order via e-mail. If you choose the WWW option, you must download the file from the appropriate TACOM webpage: Warren: http://contracting.tacom.army.mil/CFDATA/AWARDS/AWARD_RPT01.cfm Rock Island JMTC: https://acquisition.army.mil/asfi/ Red River Army Depot: http://www.redriver.army.mil/contractingframes/cfawd_lst.cfm Anniston Army Depot: https://acquisition.army.mil/asfi/ (d) Electronic Data Interchange. If you choose to receive contract awards, modifications and delivery orders through EDI, they will be delivered electronically via the Federal Acquisition Network (FACNET). Federal Standard Version 3050 of Standard X12 from the American National Standards Institute (ANSI) will be used as the format for these electronic transactions. (1) You must complete the EDI 838 Trading Partner Profile, and must agree (i) to subcontract with a DoD certified VAN or Value Added Service (VAS) provider, or (ii) to become DoD certified as a Value Added Network (VAN). The EDI 838 Training Partner Profile is contained in the basic CCR registration form and includes portions of the registration form which are titled "Optional". (2) You must select a VAN from the official DoD approved list. DoD Certified VANs are listed at http://www.acq.osd.mil/dpap/ebiz/VANs.htm. If your VAN is later removed from the official list, or if you voluntarily drop your initially selected VAN, then you must switch to a VAN that remains on the official DoD approved list. You must maintain an active account on a DoD approved VAN for the entire duration of the contract, beginning no later than the 60th day after award. (e) Unless otherwise specified elsewhere in the contract, all data items you are required to provide under this contract must be submitted electronically. Please go to the following webpage for detailed information about submitting your offer electronically: http://contracting.tacom.army.mil/acqinfo/ebidnotice.htm. (f) Additional information can be obtained by sending a message to: Usarmy.detroit.acc.mbx.wrn-web-page@mail.mil or by calling (586) 282-7059. [End of Clause] 52.204-4009 (TACOM) MANDATORY USE OF CONTRACTOR TO GOVERNMENT ELECTRONIC COMMUNICATION (AUG 2008) (a) All references in the contract to the submission of written documentation shall mean electronic submission. All electronic submissions shall be in the formats and media described in the website: http://contracting.tacom.army.mil/acqinfo/ebidnotice.htm. (b) This shall include all written unclassified communications between the Government and the Contractor except contract awards and contract modifications which shall be posted on the internet. Return receipt shall be used if a commercial application is available. Classified information shall be handled in full accordance with the appropriate security requirements. (c) In order to be contractually binding, all Government communications requiring a Contracting Officer signature must include an affirmative response from the Contracting Officer's e-mail address. The Contractor shall designate the personnel with signature authority who can contractually bind the contractor. All binding contractor communication shall be sent from this contractor e-mail address(es). (d) Upon award, the Contractor shall provide the Contracting Officer with a list of e-mail addresses for all administrative and technical personnel assigned to this contract. (e) Unless exempted by the Procuring Contracting Officer in writing, all unclassified written communication after contract award shall be transmitted electronically. (End of Clause) 52.211-4000 (TACOM) MARKING OF SHIPMENT (JUL 2008) All packages must be marked with the contents and TACOM Contract/Order Number. Failure to properly mark all shipments may result in delayed payment and possible rejection of invoices and/or shipments. [End of Clause] 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JUL 2012) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). ___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _X__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). ____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Feb 2012) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Jul 2010) (Pub. L. 111-5). _X__ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note). ____ (7) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Feb 2012) (41 U.S.C. 2313). ____ (8) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (MAY 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161). ____ (9) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a). ____ (10) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). ____ (11) [Reserved] _X___ (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). ____ (ii) Alternate I (NOV 2011). ____ (iii) Alternate II (NOV 2011). ____ (13)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. _X___ (14) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)). ____ (15)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637(d)(4)). ____ (ii) Alternate I (Oct 2001) of 52.219-9. ____ (iii) Alternate II (Oct 2001) of 52.219-9. ____ (iv) Alternate III (Jul 2010) of 52.219-9. _X___ (16) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)). _X___ (17) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)). ____ (18) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). ____ (19)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). ____ (ii) Alternate I (June 2003) of 52.219-23. ____ (20) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ____ (21) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ____ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f). __X__ (23) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2012) (15 U.S.C. 632(a)(2)). ____ (24) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (APR 2012) (15 U.S.C. 637(m)). ____ (25) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (APR 2012) (15 U.S.C. 637(m)). __X__ (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755). __X__ (27) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (MAR 2012) (E.O. 3126). __X__ (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). __X__ (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). __X__ (30) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). __X__ (31) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). __X__ (32) 52.222-37, Employment Reports on Veterans (Sep 2010) (38 U.S.C. 4212). __X__ (33) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __X__ (34) 52.222-54, Employment Eligibility Verification (Jul 2012). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (36) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). ____ (37)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007) (E.O. 13423). ____ (ii) Alternate I (Dec 2007) of 52.223-16. __X__ (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (39) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). ____(40)(i) 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (MAY 2012) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, and 112-42). ____ (ii) Alternate I (Mar 2012) of 52.225-3. ____ (iii) Alternate II (Mar 2012) of 52.225-3. ____ (iv) Alternate III (Mar 2012) of 52.225-3. ____ (41) 52.225-5, Trade Agreements (MAY 2012) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __X__ (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (43) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150 ____ (44) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ____ (45) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). ____ (46) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). __X__ (47) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). ____ (48) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). ____ (49) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332). ____ (50) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ____ (51)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _____ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). _____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _____ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.). _____ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). _____ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). _____ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JUL 2012). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/farsite.html (End of clause) 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2011) (a) Definitions. As used in this clause' Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means-- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. DoD unique item identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency. Government's unit acquisition cost means-- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise (e.g., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/web/Normen-ontwikkelen/ISOIEC-15459-Issuing-Agency-Codes.htm. Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier. Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: ------------------------------------------------------------------------ Contract line, subline, or exhibit line item No. Item description ------------------------------------------------------------------------ N/A (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ----. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-- (i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology--Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall-- (A) Determine whether to-- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code-- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_ submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JUN 2012) (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. __X__ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207). (b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. (1) __X__ 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011) (Section 847 of Pub. L. 110-181). (2) ____ 252.203-7003, Agency Office of the Inspector General (APR 2012)(section 6101 of Pub. L. 110-252, 41 U.S.C. 3509). (3) ____ 252.205-7000, Provision of Information to Cooperative Agreement Holders (DEC 1991) (10 U.S.C. 2416). (4) ____ 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) (JUN 2012) (15 U.S.C. 637). (5) ____ 252.219-7004, Small Business Subcontracting Plan (Test Program) (JAN 2011) (15 U.S.C. 637 note). (6)(i) ____ 252.225-7001, Buy American and Balance of Payments Program (JUN 2012) (41 U.S.C. chapter 83, E.O. 10582). (ii) ____ Alternate I (OCT 2011) of 252.225-7001. (7) ____ 252.225-7008, Restriction on Acquisition of Specialty Metals (JUL 2009) (10 U.S.C. 2533b). (8) ____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (JUN 2012) (10 U.S.C. 2533b). (9) __X__ 252.225-7012, Preference for Certain Domestic Commodities (JUN 2012) (10 U.S.C. 2533a). (10) ____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools (JUN 2005) (10 U.S.C. 2533a). (11) ____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings (JUN 2011) (Section 8065 of Pub. L. 107-117 and the same restriction in subsequent DoD appropriations acts). 12) ____ 252.225-7017, Photovoltaic Devices (JUN 2012) (Section 846 of Pub. L. 111-383). 13)(i) ____ 252.225-7021, Trade Agreements (JUN 2012) (19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note). (ii) ____ Alternate I (OCT 2011) of 252.225-7021. (iii) ____ Alternate II (OCT 2011) of 252.225-7021. (14) ____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales (APR 2003) (22 U.S.C. 2779). (15) ____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments (APR 2003) (22 U.S.C. 2755). (16)(i) ____ 252.225-7036, Buy American Act-Free Trade Agreements-Balance of Payments Program (JUN 2012) (41 U.S.C. chapter 83 and 19 U.S.C. 3301 note). (ii) ____ Alternate I (JUN 2012) of 252.225-7036. (iii) ____ Alternate II (JUN 2012) of 252.225-7036. (iv) ____ Alternate III (JUN 2012) of 252.225-7036. (v) ____ Alternate IV (JUN 2012) of 252.225-7036. (vi) ____Alternate V (JUN 2012) of 252.225-7036. (17) ____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers (JUN 2005) (10 U.S.C. 2534(a)(3)). (18) ____ 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). (19) ____ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns (SEP 2004) (Section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts). (20) ____ 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (21) ____ 252.227-7015, Technical Data-Commercial Items (DEC 2011) (10 U.S.C. 2320). (22) ____ 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)))(10 U.S.C. 2321). (23) ____ 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227). (24) ____ 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84) (25) ____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (26) __X__ 252.243-7002, Requests for Equitable Adjustment (MAR 1998) (10 U.S.C. 2410). (27) ____ 252.246-7004, Safety of Facilities, Infrastructure, and Equipment For Military Operations (OCT 2010) (Section 807 of Pub. L. 111-84). (28) ____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (29)(i) __X__ 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (ii) ____ Alternate I (MAR 2000) of 252.247-7023. (iii) ____ Alternate II (MAR 2000) of 252.247-7023. (iv) ____ Alternate III (MAY 2002) of 252.247-7023. (30) ____ 252.247-7024, Notification of Transportation of Supplies by Sea (MAR (2000) (10 U.S.C. 2631). (31) ____ 252.247-7027, Riding Gang Member Requirements (OCT 2011) (Section 3504 of Pub. L. 110-417). c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: (1) 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). 2) 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)). (4) 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)). (5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). (6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (End of clause) CLAUSES INCORPORATED BY FULL TEXT 52.209-4011 (TACOM) CONTRACTOR RESPONSIBILITY AND ELIGIBILITY FOR AWARD (JAN 2001) (a) We'll award a contract to the offeror that: (1) submits the lowest evaluated offer if award is based on price only, or the offer that provides the best value to the Government if factors in addition to price are identified in Section M, and (2) submits a bid or proposal that meets all the material requirements of this solicitation, and (3) meets all the responsibility criteria at FAR 9.104. (b) To make sure that you meet the responsibility criteria at FAR 9.104 we may: (1) arrange a visit to your plant and perform a preaward survey; (2) ask you to provide financial, technical, production, or managerial background information. (c) If you don't provide us with the data we ask for within 7 days from the date you receive our request, or if you refuse to have us visit your facility, we may determine you nonresponsible. (d) If we visit your facility, please make sure that you have current certified financial statements and other data relevant to your bid or proposal available for our team to review. [End of Provision] 52.212-4003 (TACOM) ALL OR NONE--COMMERCIAL ITEM ACQUISITION (SEPTEMBER 1996) This provision serves as an addendum that modifies paragraph (h) of FAR 52.212-1, entitled INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS. Paragraph (h) is modified to say that you must offer to provide the total quantity of the items in this solicitation. ONLY ONE AWARD WILL BE MADE AS A RESULT OF THIS SOLICITATION. OFFERS SUBMITTED FOR LESS THAN THE TOTAL QUANTITIES OF ALL THE ITEMS IN THIS SOLICITATION WILL NOT BE CONSIDERED FOR AWARD *** 52.246-4009 (TACOM) INSPECTION AND ACCEPTANCE POINTS: DESTINATION (FEB 1995) Inspection and acceptance of supplies offered under this purchase order shall take place as specified here. Inspection: DESTINATION Acceptance: DESTINATION. [End of Clause] 252.209-7999 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (DEVIATION 2012-O0004) (JAN 2012) (a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012,(Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ___ ] is not [ ___ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ___ ] is not [ ___ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision)
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/940f296bf573dfb1e38a0e73c37c0193)
 

Place of Performance

Address: ACC - Warren (ACC-WRN)(DTA) ATTN: AMSTA-AQ-AMB, E Eleven Mile Road Warren MI

Zip Code: 48397-5000
 

Record

SN02887528-W 20120920/120919001118-940f296bf573dfb1e38a0e73c37c0193 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |