MODIFICATION
65 -- Orthopedic Surgical Tools
- Notice Date
- 9/19/2012
- Notice Type
- Modification/Amendment
- Contracting Office
- 6900 Georgia Ave, NW, Washington, DC 20307
- ZIP Code
- 20307
- Solicitation Number
- 0010234584
- Response Due
- 9/21/2012
- Archive Date
- 3/20/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010234584 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-60. The associated North American Industrial Classification System (NAICS) code for this procurement is 423450 with a small business size standard of 100.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-09-21 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be West Point, NY 10996 The NARCO - Fort Belvoir requires the following items, Meet or Exceed, to the following: LI 001, 2.5 mm drill bit/QC/GOLD/110MM (Part number 310.25), 2, EA; LI 002, 2.0 MM DRILL BIT/QC/125MM (Part number 310.21), 2, EA; LI 003, 2.8 MM DRILL BIT/QC/165MM (Part number 310.288), 2, EA; LI 004, 3.5 MM DRILL BIT/QC/110MM (Part number 310.35), 2, EA; LI 005, 2.7 MM CANNULATED DRILL BIT/QC/160MM (Part number 310.67), 2, EA; LI 006, CANNULATED COUNTERSINK F/3.5MM & 4.0 MM CANNULATED SCREWS (310.86), 2, EA; LI 007, COUNTERSINK F/3.5MM CORTEX & 4.0 MM CANCELLOUS BONE SCREW (Part number 310.89), 2, EA; LI 008, TAP FOR 3.5 MM CORETX SCREWS GOLD/110 MM (Part number 311.32), 2, EA; LI 009, TAP FOR 4.0 MM CANCELLOUS BONE SCREWS/110MM (Part number 311.34), 2, EA; LI 010, HANDLE WITH QUICK COUPLING, SMALL (#311.43), 1, EA; LI 011, CANNULATED TAPFOR 4.0MM CANNULATED SCREWS/147MM (#311.63), 1, EA; LI 012, 2.0 MM PARALLEL DRILL GUIDE AND DRILL SLEEVE (#312.20), 1, EA; LI 013, 3.5 MM/2.5 MM INSERT DRILL SLEEVE (#312.30), 1, EA; LI 014, 2.7MM/1.25 MM DOUBLE DRILL SLEEVE (#312.35), 1, EA; LI 015, 2.8 MM THREADED DRILL GUIDE (#312.648), 4, EA; LI 016, SMALL HEXAGONAL SCREWDRIVER WITH HOLDING SLEEVE (#314.02), 1, EA; LI 017, SMALL HEXAGONAL SCREWDRIVER SHAFT (#314.03), 1, EA; LI 018, STARDRIVE (TM) SCREWDRIVER T15 (#314.115), 1, EA; LI 019, STARDRIVE SCREWDRIVER SHAFT/QC/T15 (#314.116), 1, EA; LI 020, cannulated 2.5mm HEXAGONAL SCREWDRIVER (#314.29), 1, EA; LI 021, 2.7MM THREE-FLUTED DRILL BIT QC/T15 (#315.28), 1, EA; LI 022, DEPTH GAUGE FOR 2.7MM AND SMALL SCREWS (#319.01), 1, EA; LI 023, CANNULATED SCREW MEASURING DEVICE FOR 3.5MM & 4.0 MM (#319.15), 1, EA; LI 024, 1.35 MM CLEANING BRUSH (#319.25), 1, EA; LI 025, 1.25 MM CLEANING STYLET (#319.38), 1, EA; LI 026, SHARP HOOK (#319.39), 1, EA; LI 027, SCREW FORCEPS (#319.97), 1, EA; LI 028, 1.6 MM WIRE SLEEVE (#323.023), 2, EA; LI 029, DIRECT MEASURING DEVICE (#323.025), 1, EA; LI 030, INSERTION GUIDE (#323.050), 1, EA; LI 031, 3.5MM LOCKING SCREW SLEEVE (#323.053), 2, EA; LI 032, 2.8MM DRILL SLEEVE (#323.054), 2, EA; LI 033, 1.6 MM WIRE SLEEVE (#323.055), 2, EA; LI 034, 2.7 MM UNIVERSAL DRILL GUIDE (#323.26), 1, EA; LI 035, 3.5 MM UNIVERSAL DRILL GUIDE (#323.36), 1, EA; LI 036, THREADED PLATE HOLDER (#324.023), 1, EA; LI 037, PUSH-PULL REDUCTION DEVICE (#324.024), 1, EA; LI 038, THREADED PLATE HOLDER-LONG FOR 3.88 MM LOCKING HOLE (#324.031), 1, EA; LI 039, BENDING IRON FOR 2.7MM & 3.5 MM PLATES (#329.04), 1, EA; LI 040, BENDING IRON FOR 2.7 MM & 3.5 MM PLATES (#329.05), 1, EA; LI 041, BENDING IRON FOR 2.7 MM & 3.5 MM RECONSTRUCTION PLATES (#329.07), 1, EA; LI 042, BENDING TEMPLATE 12H FOR FOR 3.5MM LC-DCP & DCP & LCP PLATES (#329.820), 1, EA; LI 043, BENDING TEMPLATE 7 HOLES FOR FOR 3.5MM LC-DCP & DCP PLATES (#329.87), 1, EA; LI 044, BENDING TEMPLATE 9 HOLES FOR FOR 3.5MM LC-DCP & DCP PLATES (#329.89), 1, EA; LI 045, WIRE BENDING PLIERS 160MM (#391.82), 1, EA; LI 046, BENDING IRON FOR 1.25 MM, 1.6MM & 2.0 MM KIRSCHNER WIRES (#392.00), 1, EA; LI 047, REDUCTION FORCEPS WITH POINTS NARROW-RATCHET 132MM (#398.40), 1, EA; LI 048, REDUCTION FORCEPS WITH POINTS BROAD RATCHET (#398.41), 1, EA; LI 049, SELF-CENTERING BONE FORCEPS 10MM SERRATED JAW-SPEED LOCK (#398.80), 1, EA; LI 050, PLATE HOLDING FORCEPS WITH SWIVEL FOOT/SIZE 0 (# 398.811), 1, EA; LI 051, BONE HOLDING FORCEPS-SOFT RATCHET F/PLATES TO 9MM WIDE (#399.091), 1, EA; LI 052, SMALL HOHMANN RETRACTOR 8MM SHORT NARROW TIP 160MM (#399.19), 1, EA; LI 053, PERISTEAL ELEVATOR 6MM CURVED BLADE-ROUND EDGE (#399.36), 1, EA; LI 054, HOHMANN RETRACTOR 15MM -160MM (#399.49), 1, EA; LI 055, REDUCTION FORCEPS WITH POINTS SERRATED JAW-RATCHET 144MM (399.99), 1, EA; LI 056, TORQUE LIMITING ATTACHMENT 1.5 NM/QUICK COUPLING (#511.773), 1, EA; LI 057, 1.25 MM THREADED GUIDE WIRE 150MM (#900.722), 20, EA; LI 058, SMALL FRAGMENT LCP INSTRUMENT & IMPLANT SET GRAPHIC CASE (#690.347), 1, EA; LI 059, SMALL FRAG LCP CANNULATED SCR INSTRUMENT TRAY-NYLON COATE (#691.387), 1, EA; LI 060, Washer 13.0 mm (#219.99), 12, EA; LI 061, 2.8 mm threaded guide wire - TROCAR Point 300 mm ( #292.68), 10, EA; LI 062, Screw Rack for 6.5 mm TI & SS Cann screws - 16mm/32mm threads (#690.375.70), 1, EA; LI 063, Screw Rack for 7.3 mm TI & SS Cann screws - 16mm/32mm threads (#690.375.50), 1, EA; LI 064, 7.3 mm cannulated drill bit large QC 300mm (#310.495), 1, EA; LI 065, 5.0 mm cannulated drill bit large QC/ 300 mm (#310.63), 1, EA; LI 066, Cannulated countersink for 6.5 mm & 7.3 mm Cann screws (#310.78), 1, EA; LI 067, Cann tap F/6.5mm & 7.3 mm Cann screws 275 mm/200mm tap depth (#311.689), 1, EA; LI 068, 2.8 mm adjustable parallel wire guide (#312.01), 1, EA; LI 069, 2.8 mm TROCAR (#312.02), 1, EA; LI 070, 12.0mm/8.5 mm Protection Sleeve (#312.05), 1, EA; LI 071, Variable Angle Wire Guide (#312.07), 1, EA; LI 072, 8.5 mm /2.8 mm wire sleeve (#312.08), 1, EA; LI 073, 15.5 mm/13mm washer sleeve (#312.09), 1, EA; LI 074, Multiple Wire Guide (#312.692), 1, EA; LI 075, 2.8 mm TROCAR for use with multiple wire guide (#312.694), 1, EA; LI 076, 4.0 mm hexagonal screwdriver (#313.93), 1, EA; LI 077, 4.0 mm hexagonal screwdriver shaft (#314.04), 1, EA; LI 078, Cannulated 4.0 mm hexagonal screwdriver (#314.05), 1, EA; LI 079, Holding Sleeve (#314.11), 1, EA; LI 080, Cannulated 4.0 mm hexagonal screwdriver shaft (#314.23), 1, EA; LI 081, 2.9 mm cleaning brush (#319.24), 1, EA; LI 082, 2.8 mm cleaning stylet (#319.46), 1, EA; LI 083, Cann Screw Measuring Device for 6.5 mm & 7.3 mm Cann screws (#319.70), 1, EA; LI 084, Screw Forceps (#319.97), 1, EA; LI 085, Large Quick Coupling (#338.49), 1, EA; LI 086, Graphic Case F/6.5 mm & 7.3 mm Combined Cannulated Screw Set (#690.375), 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NARCO - Fort Belvoir intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. NARCO - Fort Belvoir is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/11672960a0eafac2dc0d62b6f8ac18b2)
- Place of Performance
- Address: West Point, NY 10996
- Zip Code: 10996
- Zip Code: 10996
- Record
- SN02890475-W 20120921/120920001857-11672960a0eafac2dc0d62b6f8ac18b2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |